11216766535

Committed 07 Oct 2024 01:37PM UTC coverage: 57.817% (-1.0%) from 58.817%

Build # 11216766535

Build Type

Pull #9148

github

Committed by

ProofOfKeags

Commit Message

lnwire: remove kickoff feerate from propose/commit

Pull Request Pull Request #9148: DynComms [2/n]: lnwire: add authenticated wire messages for Dyn*

Run Details

571 of 879 new or added lines in 16 files covered. (64.96%)

23253 existing lines in 251 files now uncovered.

99022 of 171268 relevant lines covered (57.82%)

38420.67 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

58.33

/htlcswitch/failure_detail.go

package htlcswitch

// FailureDetail is an interface implemented by failures that occur on
// our incoming or outgoing link, or within the switch itself.
type FailureDetail interface {
        // FailureString returns the string representation of a failure
        // detail.
        FailureString() string
}

// OutgoingFailure is an enum which is used to enrich failures which occur in
// the switch or on our outgoing link with additional metadata.
type OutgoingFailure int

const (
        // OutgoingFailureNone is returned when the wire message contains
        // sufficient information.
        OutgoingFailureNone OutgoingFailure = iota

        // OutgoingFailureDecodeError indicates that we could not decode the
        // failure reason provided for a failed payment.
        OutgoingFailureDecodeError

        // OutgoingFailureLinkNotEligible indicates that a routing attempt was
        // made over a link that is not eligible for routing.
        OutgoingFailureLinkNotEligible

        // OutgoingFailureOnChainTimeout indicates that a payment had to be
        // timed out on chain before it got past the first hop by us or the
        // remote party.
        OutgoingFailureOnChainTimeout

        // OutgoingFailureHTLCExceedsMax is returned when a htlc exceeds our
        // policy's maximum htlc amount.
        OutgoingFailureHTLCExceedsMax

        // OutgoingFailureInsufficientBalance is returned when we cannot route a
        // htlc due to insufficient outgoing capacity.
        OutgoingFailureInsufficientBalance

        // OutgoingFailureCircularRoute is returned when an attempt is made
        // to forward a htlc through our node which arrives and leaves on the
        // same channel.
        OutgoingFailureCircularRoute

        // OutgoingFailureIncompleteForward is returned when we cancel an incomplete
        // forward.
        OutgoingFailureIncompleteForward

        // OutgoingFailureDownstreamHtlcAdd is returned when we fail to add a
        // downstream htlc to our outgoing link.
        OutgoingFailureDownstreamHtlcAdd

        // OutgoingFailureForwardsDisabled is returned when the switch is
        // configured to disallow forwards.
        OutgoingFailureForwardsDisabled
)

// FailureString returns the string representation of a failure detail.
//
// Note: it is part of the FailureDetail interface.
func (fd OutgoingFailure) FailureString() string {
        switch fd {
        case OutgoingFailureNone:
                return "no failure detail"

        case OutgoingFailureDecodeError:
                return "could not decode wire failure"

        case OutgoingFailureLinkNotEligible:
                return "link not eligible"

        case OutgoingFailureOnChainTimeout:
                return "payment was resolved on-chain, then canceled back"

        case OutgoingFailureHTLCExceedsMax:
                return "htlc exceeds maximum policy amount"

        case OutgoingFailureInsufficientBalance:
                return "insufficient bandwidth to route htlc"

        case OutgoingFailureCircularRoute:
                return "same incoming and outgoing channel"

        case OutgoingFailureIncompleteForward:
                return "failed after detecting incomplete forward"

        case OutgoingFailureDownstreamHtlcAdd:
                return "could not add downstream htlc"

        case OutgoingFailureForwardsDisabled:
                return "node configured to disallow forwards"

        default:
                return "unknown failure detail"
        }
}

1	package htlcswitch
2
3	// FailureDetail is an interface implemented by failures that occur on
4	// our incoming or outgoing link, or within the switch itself.
5	type FailureDetail interface {
6	// FailureString returns the string representation of a failure
7	// detail.
8	FailureString() string
9	}
10
11	// OutgoingFailure is an enum which is used to enrich failures which occur in
12	// the switch or on our outgoing link with additional metadata.
13	type OutgoingFailure int
14
15	const (
16	// OutgoingFailureNone is returned when the wire message contains
17	// sufficient information.
18	OutgoingFailureNone OutgoingFailure = iota
19
20	// OutgoingFailureDecodeError indicates that we could not decode the
21	// failure reason provided for a failed payment.
22	OutgoingFailureDecodeError
23
24	// OutgoingFailureLinkNotEligible indicates that a routing attempt was
25	// made over a link that is not eligible for routing.
26	OutgoingFailureLinkNotEligible
27
28	// OutgoingFailureOnChainTimeout indicates that a payment had to be
29	// timed out on chain before it got past the first hop by us or the
30	// remote party.
31	OutgoingFailureOnChainTimeout
32
33	// OutgoingFailureHTLCExceedsMax is returned when a htlc exceeds our
34	// policy's maximum htlc amount.
35	OutgoingFailureHTLCExceedsMax
36
37	// OutgoingFailureInsufficientBalance is returned when we cannot route a
38	// htlc due to insufficient outgoing capacity.
39	OutgoingFailureInsufficientBalance
40
41	// OutgoingFailureCircularRoute is returned when an attempt is made
42	// to forward a htlc through our node which arrives and leaves on the
43	// same channel.
44	OutgoingFailureCircularRoute
45
46	// OutgoingFailureIncompleteForward is returned when we cancel an incomplete
47	// forward.
48	OutgoingFailureIncompleteForward
49
50	// OutgoingFailureDownstreamHtlcAdd is returned when we fail to add a
51	// downstream htlc to our outgoing link.
52	OutgoingFailureDownstreamHtlcAdd
53
54	// OutgoingFailureForwardsDisabled is returned when the switch is
55	// configured to disallow forwards.
56	OutgoingFailureForwardsDisabled
57	)
58
59	// FailureString returns the string representation of a failure detail.
60	//
61	// Note: it is part of the FailureDetail interface.
62	func (fd OutgoingFailure) FailureString() string {	9✔
63	switch fd {	9✔
64	case OutgoingFailureNone:	×
65	return "no failure detail"	×
66
67	case OutgoingFailureDecodeError:	×
68	return "could not decode wire failure"	×
69
70	case OutgoingFailureLinkNotEligible:	1✔
71	return "link not eligible"	1✔
72
UNCOV 73	case OutgoingFailureOnChainTimeout:	×
UNCOV 74	return "payment was resolved on-chain, then canceled back"	×
75
76	case OutgoingFailureHTLCExceedsMax:	2✔
77	return "htlc exceeds maximum policy amount"	2✔
78
79	case OutgoingFailureInsufficientBalance:	1✔
80	return "insufficient bandwidth to route htlc"	1✔
81
82	case OutgoingFailureCircularRoute:	1✔
83	return "same incoming and outgoing channel"	1✔
84
85	case OutgoingFailureIncompleteForward:	3✔
86	return "failed after detecting incomplete forward"	3✔
87
88	case OutgoingFailureDownstreamHtlcAdd:	×
89	return "could not add downstream htlc"	×
90
91	case OutgoingFailureForwardsDisabled:	1✔
92	return "node configured to disallow forwards"	1✔
93
94	default:	×
95	return "unknown failure detail"	×
96	}
97	}

lightningnetwork / lnd / 11216766535

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous