11216766535

Committed 07 Oct 2024 01:37PM UTC coverage: 57.817% (-1.0%) from 58.817%

Build # 11216766535

Build Type

Pull #9148

github

Committed by

ProofOfKeags

Commit Message

lnwire: remove kickoff feerate from propose/commit

Pull Request Pull Request #9148: DynComms [2/n]: lnwire: add authenticated wire messages for Dyn*

Run Details

571 of 879 new or added lines in 16 files covered. (64.96%)

23253 existing lines in 251 files now uncovered.

99022 of 171268 relevant lines covered (57.82%)

38420.67 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

82.63

/lnwallet/commitment.go

package lnwallet

import (
        "bytes"
        "fmt"

        "github.com/btcsuite/btcd/blockchain"
        "github.com/btcsuite/btcd/btcec/v2"
        "github.com/btcsuite/btcd/btcutil"
        "github.com/btcsuite/btcd/chaincfg/chainhash"
        "github.com/btcsuite/btcd/txscript"
        "github.com/btcsuite/btcd/wire"
        "github.com/lightningnetwork/lnd/channeldb"
        "github.com/lightningnetwork/lnd/fn"
        "github.com/lightningnetwork/lnd/input"
        "github.com/lightningnetwork/lnd/lntypes"
        "github.com/lightningnetwork/lnd/lnwallet/chainfee"
        "github.com/lightningnetwork/lnd/lnwire"
)

// AnchorSize is the constant anchor output size.
const AnchorSize = btcutil.Amount(330)

// DefaultAnchorsCommitMaxFeeRateSatPerVByte is the default max fee rate in
// sat/vbyte the initiator will use for anchor channels. This should be enough
// to ensure propagation before anchoring down the commitment transaction.
const DefaultAnchorsCommitMaxFeeRateSatPerVByte = 10

// CommitmentKeyRing holds all derived keys needed to construct commitment and
// HTLC transactions. The keys are derived differently depending whether the
// commitment transaction is ours or the remote peer's. Private keys associated
// with each key may belong to the commitment owner or the "other party" which
// is referred to in the field comments, regardless of which is local and which
// is remote.
type CommitmentKeyRing struct {
        // CommitPoint is the "per commitment point" used to derive the tweak
        // for each base point.
        CommitPoint *btcec.PublicKey

        // LocalCommitKeyTweak is the tweak used to derive the local public key
        // from the local payment base point or the local private key from the
        // base point secret. This may be included in a SignDescriptor to
        // generate signatures for the local payment key.
        //
        // NOTE: This will always refer to "our" local key, regardless of
        // whether this is our commit or not.
        LocalCommitKeyTweak []byte

        // TODO(roasbeef): need delay tweak as well?

        // LocalHtlcKeyTweak is the tweak used to derive the local HTLC key
        // from the local HTLC base point. This value is needed in order to
        // derive the final key used within the HTLC scripts in the commitment
        // transaction.
        //
        // NOTE: This will always refer to "our" local HTLC key, regardless of
        // whether this is our commit or not.
        LocalHtlcKeyTweak []byte

        // LocalHtlcKey is the key that will be used in any clause paying to
        // our node of any HTLC scripts within the commitment transaction for
        // this key ring set.
        //
        // NOTE: This will always refer to "our" local HTLC key, regardless of
        // whether this is our commit or not.
        LocalHtlcKey *btcec.PublicKey

        // RemoteHtlcKey is the key that will be used in clauses within the
        // HTLC script that send money to the remote party.
        //
        // NOTE: This will always refer to "their" remote HTLC key, regardless
        // of whether this is our commit or not.
        RemoteHtlcKey *btcec.PublicKey

        // ToLocalKey is the commitment transaction owner's key which is
        // included in HTLC success and timeout transaction scripts. This is
        // the public key used for the to_local output of the commitment
        // transaction.
        //
        // NOTE: Who's key this is depends on the current perspective. If this
        // is our commitment this will be our key.
        ToLocalKey *btcec.PublicKey

        // ToRemoteKey is the non-owner's payment key in the commitment tx.
        // This is the key used to generate the to_remote output within the
        // commitment transaction.
        //
        // NOTE: Who's key this is depends on the current perspective. If this
        // is our commitment this will be their key.
        ToRemoteKey *btcec.PublicKey

        // RevocationKey is the key that can be used by the other party to
        // redeem outputs from a revoked commitment transaction if it were to
        // be published.
        //
        // NOTE: Who can sign for this key depends on the current perspective.
        // If this is our commitment, it means the remote node can sign for
        // this key in case of a breach.
        RevocationKey *btcec.PublicKey
}

// DeriveCommitmentKeys generates a new commitment key set using the base points
// and commitment point. The keys are derived differently depending on the type
// of channel, and whether the commitment transaction is ours or the remote
// peer's.
func DeriveCommitmentKeys(commitPoint *btcec.PublicKey,
        whoseCommit lntypes.ChannelParty, chanType channeldb.ChannelType,
        localChanCfg, remoteChanCfg *channeldb.ChannelConfig) *CommitmentKeyRing {

        tweaklessCommit := chanType.IsTweakless()

        // Depending on if this is our commit or not, we'll choose the correct
        // base point.
        localBasePoint := localChanCfg.PaymentBasePoint
        if whoseCommit.IsLocal() {
                localBasePoint = localChanCfg.DelayBasePoint
        }

        // First, we'll derive all the keys that don't depend on the context of
        // whose commitment transaction this is.
        keyRing := &CommitmentKeyRing{
                CommitPoint: commitPoint,

                LocalCommitKeyTweak: input.SingleTweakBytes(
                        commitPoint, localBasePoint.PubKey,
                ),
                LocalHtlcKeyTweak: input.SingleTweakBytes(
                        commitPoint, localChanCfg.HtlcBasePoint.PubKey,
                ),
                LocalHtlcKey: input.TweakPubKey(
                        localChanCfg.HtlcBasePoint.PubKey, commitPoint,
                ),
                RemoteHtlcKey: input.TweakPubKey(
                        remoteChanCfg.HtlcBasePoint.PubKey, commitPoint,
                ),
        }

        // We'll now compute the to_local, to_remote, and revocation key based
        // on the current commitment point. All keys are tweaked each state in
        // order to ensure the keys from each state are unlinkable. To create
        // the revocation key, we take the opposite party's revocation base
        // point and combine that with the current commitment point.
        var (
                toLocalBasePoint    *btcec.PublicKey
                toRemoteBasePoint   *btcec.PublicKey
                revocationBasePoint *btcec.PublicKey
        )
        if whoseCommit.IsLocal() {
                toLocalBasePoint = localChanCfg.DelayBasePoint.PubKey
                toRemoteBasePoint = remoteChanCfg.PaymentBasePoint.PubKey
                revocationBasePoint = remoteChanCfg.RevocationBasePoint.PubKey
        } else {
                toLocalBasePoint = remoteChanCfg.DelayBasePoint.PubKey
                toRemoteBasePoint = localChanCfg.PaymentBasePoint.PubKey
                revocationBasePoint = localChanCfg.RevocationBasePoint.PubKey
        }

        // With the base points assigned, we can now derive the actual keys
        // using the base point, and the current commitment tweak.
        keyRing.ToLocalKey = input.TweakPubKey(toLocalBasePoint, commitPoint)
        keyRing.RevocationKey = input.DeriveRevocationPubkey(
                revocationBasePoint, commitPoint,
        )

        // If this commitment should omit the tweak for the remote point, then
        // we'll use that directly, and ignore the commitPoint tweak.
        if tweaklessCommit {
                keyRing.ToRemoteKey = toRemoteBasePoint

                // If this is not our commitment, the above ToRemoteKey will be
                // ours, and we blank out the local commitment tweak to
                // indicate that the key should not be tweaked when signing.
                if whoseCommit.IsRemote() {
                        keyRing.LocalCommitKeyTweak = nil
                }
        } else {
                keyRing.ToRemoteKey = input.TweakPubKey(
                        toRemoteBasePoint, commitPoint,
                )
        }

        return keyRing
}

// WitnessScriptDesc holds the output script and the witness script for p2wsh
// outputs.
type WitnessScriptDesc struct {
        // OutputScript is the output's PkScript.
        OutputScript []byte

        // WitnessScript is the full script required to properly redeem the
        // output. This field should be set to the full script if a p2wsh
        // output is being signed. For p2wkh it should be set equal to the
        // PkScript.
        WitnessScript []byte
}

// PkScript is the public key script that commits to the final
// contract.
func (w *WitnessScriptDesc) PkScript() []byte {
        return w.OutputScript
}

// WitnessScriptToSign returns the witness script that we'll use when signing
// for the remote party, and also verifying signatures on our transactions. As
// an example, when we create an outgoing HTLC for the remote party, we want to
// sign their success path.
func (w *WitnessScriptDesc) WitnessScriptToSign() []byte {
        return w.WitnessScript
}

// WitnessScriptForPath returns the witness script for the given spending path.
// An error is returned if the path is unknown. This is useful as when
// constructing a control block for a given path, one also needs witness script
// being signed.
func (w *WitnessScriptDesc) WitnessScriptForPath(
        _ input.ScriptPath) ([]byte, error) {

        return w.WitnessScript, nil
}

// CommitScriptToSelf constructs the public key script for the output on the
// commitment transaction paying to the "owner" of said commitment transaction.
// The `initiator` argument should correspond to the owner of the commitment
// transaction which we are generating the to_local script for. If the other
// party learns of the preimage to the revocation hash, then they can claim all
// the settled funds in the channel, plus the unsettled funds.
func CommitScriptToSelf(chanType channeldb.ChannelType, initiator bool,
        selfKey, revokeKey *btcec.PublicKey, csvDelay, leaseExpiry uint32,
        auxLeaf input.AuxTapLeaf) (input.ScriptDescriptor, error) {

        switch {
        // For taproot scripts, we'll need to make a slightly modified script
        // where a NUMS key is used to force a script path reveal of either the
        // revocation or the CSV timeout.
        //
        // Our "redeem" script here is just the taproot witness program.
        case chanType.IsTaproot():
                return input.NewLocalCommitScriptTree(
                        csvDelay, selfKey, revokeKey, auxLeaf,
                )

        // If we are the initiator of a leased channel, then we have an
        // additional CLTV requirement in addition to the usual CSV
        // requirement.
        case initiator && chanType.HasLeaseExpiration():
                toLocalRedeemScript, err := input.LeaseCommitScriptToSelf(
                        selfKey, revokeKey, csvDelay, leaseExpiry,
                )
                if err != nil {
                        return nil, err
                }

                toLocalScriptHash, err := input.WitnessScriptHash(
                        toLocalRedeemScript,
                )
                if err != nil {
                        return nil, err
                }

                return &WitnessScriptDesc{
                        OutputScript:  toLocalScriptHash,
                        WitnessScript: toLocalRedeemScript,
                }, nil

        default:
                toLocalRedeemScript, err := input.CommitScriptToSelf(
                        csvDelay, selfKey, revokeKey,
                )
                if err != nil {
                        return nil, err
                }

                toLocalScriptHash, err := input.WitnessScriptHash(
                        toLocalRedeemScript,
                )
                if err != nil {
                        return nil, err
                }

                return &WitnessScriptDesc{
                        OutputScript:  toLocalScriptHash,
                        WitnessScript: toLocalRedeemScript,
                }, nil
        }
}

// CommitScriptToRemote derives the appropriate to_remote script based on the
// channel's commitment type. The `initiator` argument should correspond to the
// owner of the commitment transaction which we are generating the to_remote
// script for. The second return value is the CSV delay of the output script,
// what must be satisfied in order to spend the output.
func CommitScriptToRemote(chanType channeldb.ChannelType, initiator bool,
        remoteKey *btcec.PublicKey, leaseExpiry uint32,
        auxLeaf input.AuxTapLeaf) (input.ScriptDescriptor, uint32, error) {

        switch {
        // If we are not the initiator of a leased channel, then the remote
        // party has an additional CLTV requirement in addition to the 1 block
        // CSV requirement.
        case chanType.HasLeaseExpiration() && !initiator:
                script, err := input.LeaseCommitScriptToRemoteConfirmed(
                        remoteKey, leaseExpiry,
                )
                if err != nil {
                        return nil, 0, err
                }

                p2wsh, err := input.WitnessScriptHash(script)
                if err != nil {
                        return nil, 0, err
                }

                return &WitnessScriptDesc{
                        OutputScript:  p2wsh,
                        WitnessScript: script,
                }, 1, nil

        // For taproot channels, we'll use a slightly different format, where
        // we use a NUMS key to force the remote party to take a script path,
        // with the sole tap leaf enforcing the 1 CSV delay.
        case chanType.IsTaproot():
                toRemoteScriptTree, err := input.NewRemoteCommitScriptTree(
                        remoteKey, auxLeaf,
                )
                if err != nil {
                        return nil, 0, err
                }

                return toRemoteScriptTree, 1, nil

        // If this channel type has anchors, we derive the delayed to_remote
        // script.
        case chanType.HasAnchors():
                script, err := input.CommitScriptToRemoteConfirmed(remoteKey)
                if err != nil {
                        return nil, 0, err
                }

                p2wsh, err := input.WitnessScriptHash(script)
                if err != nil {
                        return nil, 0, err
                }

                return &WitnessScriptDesc{
                        OutputScript:  p2wsh,
                        WitnessScript: script,
                }, 1, nil

        default:
                // Otherwise the to_remote will be a simple p2wkh.
                p2wkh, err := input.CommitScriptUnencumbered(remoteKey)
                if err != nil {
                        return nil, 0, err
                }

                // Since this is a regular P2WKH, the WitnessScipt and PkScript
                // should both be set to the script hash.
                return &WitnessScriptDesc{
                        OutputScript:  p2wkh,
                        WitnessScript: p2wkh,
                }, 0, nil
        }
}

// HtlcSigHashType returns the sighash type to use for HTLC success and timeout
// transactions given the channel type.
func HtlcSigHashType(chanType channeldb.ChannelType) txscript.SigHashType {
        if chanType.HasAnchors() {
                return txscript.SigHashSingle | txscript.SigHashAnyOneCanPay
        }

        return txscript.SigHashAll
}

// HtlcSignDetails converts the passed parameters to a SignDetails valid for
// this channel type. For non-anchor channels this will return nil.
func HtlcSignDetails(chanType channeldb.ChannelType, signDesc input.SignDescriptor,
        sigHash txscript.SigHashType, peerSig input.Signature) *input.SignDetails {

        // Non-anchor channels don't need sign details, as the HTLC second
        // level cannot be altered.
        if !chanType.HasAnchors() {
                return nil
        }

        return &input.SignDetails{
                SignDesc:    signDesc,
                SigHashType: sigHash,
                PeerSig:     peerSig,
        }
}

// HtlcSecondLevelInputSequence dictates the sequence number we must use on the
// input to a second level HTLC transaction.
func HtlcSecondLevelInputSequence(chanType channeldb.ChannelType) uint32 {
        if chanType.HasAnchors() {
                return 1
        }

        return 0
}

// sweepSigHash returns the sign descriptor to use when signing a sweep
// transaction. For taproot channels, we'll use this to always sweep with
// sighash default.
func sweepSigHash(chanType channeldb.ChannelType) txscript.SigHashType {
        if chanType.IsTaproot() {
                return txscript.SigHashDefault
        }

        return txscript.SigHashAll
}

// SecondLevelHtlcScript derives the appropriate second level HTLC script based
// on the channel's commitment type. It is the uniform script that's used as the
// output for the second-level HTLC transactions. The second level transaction
// act as a sort of covenant, ensuring that a 2-of-2 multi-sig output can only
// be spent in a particular way, and to a particular output. The `initiator`
// argument should correspond to the owner of the commitment transaction which
// we are generating the to_local script for.
func SecondLevelHtlcScript(chanType channeldb.ChannelType, initiator bool,
        revocationKey, delayKey *btcec.PublicKey, csvDelay, leaseExpiry uint32,
        auxLeaf input.AuxTapLeaf) (input.ScriptDescriptor, error) {

        switch {
        // For taproot channels, the pkScript is a segwit v1 p2tr output.
        case chanType.IsTaproot():
                return input.TaprootSecondLevelScriptTree(
                        revocationKey, delayKey, csvDelay, auxLeaf,
                )

        // If we are the initiator of a leased channel, then we have an
        // additional CLTV requirement in addition to the usual CSV
        // requirement.
        case initiator && chanType.HasLeaseExpiration():
                witnessScript, err := input.LeaseSecondLevelHtlcScript(
                        revocationKey, delayKey, csvDelay, leaseExpiry,
                )
                if err != nil {
                        return nil, err
                }

                pkScript, err := input.WitnessScriptHash(witnessScript)
                if err != nil {
                        return nil, err
                }

                return &WitnessScriptDesc{
                        OutputScript:  pkScript,
                        WitnessScript: witnessScript,
                }, nil

        default:
                witnessScript, err := input.SecondLevelHtlcScript(
                        revocationKey, delayKey, csvDelay,
                )
                if err != nil {
                        return nil, err
                }

                pkScript, err := input.WitnessScriptHash(witnessScript)
                if err != nil {
                        return nil, err
                }

                return &WitnessScriptDesc{
                        OutputScript:  pkScript,
                        WitnessScript: witnessScript,
                }, nil
        }
}

// CommitWeight returns the base commitment weight before adding HTLCs.
func CommitWeight(chanType channeldb.ChannelType) lntypes.WeightUnit {
        switch {
        case chanType.IsTaproot():
                return input.TaprootCommitWeight

        // If this commitment has anchors, it will be slightly heavier.
        case chanType.HasAnchors():
                return input.AnchorCommitWeight

        default:
                return input.CommitWeight
        }
}

// HtlcTimeoutFee returns the fee in satoshis required for an HTLC timeout
// transaction based on the current fee rate.
func HtlcTimeoutFee(chanType channeldb.ChannelType,
        feePerKw chainfee.SatPerKWeight) btcutil.Amount {

        switch {
        // For zero-fee HTLC channels, this will always be zero, regardless of
        // feerate.
        case chanType.ZeroHtlcTxFee() || chanType.IsTaproot():
                return 0

        case chanType.HasAnchors():
                return feePerKw.FeeForWeight(input.HtlcTimeoutWeightConfirmed)

        default:
                return feePerKw.FeeForWeight(input.HtlcTimeoutWeight)
        }
}

// HtlcSuccessFee returns the fee in satoshis required for an HTLC success
// transaction based on the current fee rate.
func HtlcSuccessFee(chanType channeldb.ChannelType,
        feePerKw chainfee.SatPerKWeight) btcutil.Amount {

        switch {
        // For zero-fee HTLC channels, this will always be zero, regardless of
        // feerate.
        case chanType.ZeroHtlcTxFee() || chanType.IsTaproot():
                return 0

        case chanType.HasAnchors():
                return feePerKw.FeeForWeight(input.HtlcSuccessWeightConfirmed)

        default:
                return feePerKw.FeeForWeight(input.HtlcSuccessWeight)
        }
}

// CommitScriptAnchors return the scripts to use for the local and remote
// anchor.
func CommitScriptAnchors(chanType channeldb.ChannelType,
        localChanCfg, remoteChanCfg *channeldb.ChannelConfig,
        keyRing *CommitmentKeyRing) (
        input.ScriptDescriptor, input.ScriptDescriptor, error) {

        var (
                anchorScript func(
                        key *btcec.PublicKey) (input.ScriptDescriptor, error)

                keySelector func(*channeldb.ChannelConfig,
                        bool) *btcec.PublicKey
        )

        switch {
        // For taproot channels, the anchor is slightly different: the top
        // level key is now the (relative) local delay and remote public key,
        // since these are fully revealed once the commitment hits the chain.
        case chanType.IsTaproot():
                anchorScript = func(
                        key *btcec.PublicKey) (input.ScriptDescriptor, error) {

                        return input.NewAnchorScriptTree(key)
                }

                keySelector = func(cfg *channeldb.ChannelConfig,
                        local bool) *btcec.PublicKey {

                        if local {
                                return keyRing.ToLocalKey
                        }

                        return keyRing.ToRemoteKey
                }

        // For normal channels we'll use the multi-sig keys since those are
        // revealed when the channel closes
        default:
                // For normal channels, we'll create a p2wsh script based on
                // the target key.
                anchorScript = func(
                        key *btcec.PublicKey) (input.ScriptDescriptor, error) {

                        script, err := input.CommitScriptAnchor(key)
                        if err != nil {
                                return nil, err
                        }

                        scriptHash, err := input.WitnessScriptHash(script)
                        if err != nil {
                                return nil, err
                        }

                        return &WitnessScriptDesc{
                                OutputScript:  scriptHash,
                                WitnessScript: script,
                        }, nil
                }

                // For the existing channels, we'll always select the multi-sig
                // key from the party's channel config.
                keySelector = func(cfg *channeldb.ChannelConfig,
                        _ bool) *btcec.PublicKey {

                        return cfg.MultiSigKey.PubKey
                }
        }

        // Get the script used for the anchor output spendable by the local
        // node.
        localAnchor, err := anchorScript(keySelector(localChanCfg, true))
        if err != nil {
                return nil, nil, err
        }

        // And the anchor spendable by the remote node.
        remoteAnchor, err := anchorScript(keySelector(remoteChanCfg, false))
        if err != nil {
                return nil, nil, err
        }

        return localAnchor, remoteAnchor, nil
}

// CommitmentBuilder is a type that wraps the type of channel we are dealing
// with, and abstracts the various ways of constructing commitment
// transactions.
type CommitmentBuilder struct {
        // chanState is the underlying channel's state struct, used to
        // determine the type of channel we are dealing with, and relevant
        // parameters.
        chanState *channeldb.OpenChannel

        // obfuscator is a 48-bit state hint that's used to obfuscate the
        // current state number on the commitment transactions.
        obfuscator [StateHintSize]byte

        // auxLeafStore is an interface that allows us to fetch auxiliary
        // tapscript leaves for the commitment output.
        auxLeafStore fn.Option[AuxLeafStore]
}

// NewCommitmentBuilder creates a new CommitmentBuilder from chanState.
func NewCommitmentBuilder(chanState *channeldb.OpenChannel,
        leafStore fn.Option[AuxLeafStore]) *CommitmentBuilder {

        // The anchor channel type MUST be tweakless.
        if chanState.ChanType.HasAnchors() && !chanState.ChanType.IsTweakless() {
                panic("invalid channel type combination")
        }

        return &CommitmentBuilder{
                chanState:    chanState,
                obfuscator:   createStateHintObfuscator(chanState),
                auxLeafStore: leafStore,
        }
}

// createStateHintObfuscator derives and assigns the state hint obfuscator for
// the channel, which is used to encode the commitment height in the sequence
// number of commitment transaction inputs.
func createStateHintObfuscator(state *channeldb.OpenChannel) [StateHintSize]byte {
        if state.IsInitiator {
                return DeriveStateHintObfuscator(
                        state.LocalChanCfg.PaymentBasePoint.PubKey,
                        state.RemoteChanCfg.PaymentBasePoint.PubKey,
                )
        }

        return DeriveStateHintObfuscator(
                state.RemoteChanCfg.PaymentBasePoint.PubKey,
                state.LocalChanCfg.PaymentBasePoint.PubKey,
        )
}

// unsignedCommitmentTx is the final commitment created from evaluating an HTLC
// view at a given height, along with some meta data.
type unsignedCommitmentTx struct {
        // txn is the final, unsigned commitment transaction for this view.
        txn *wire.MsgTx

        // fee is the total fee of the commitment transaction.
        fee btcutil.Amount

        // ourBalance is our balance on this commitment *after* subtracting
        // commitment fees and anchor outputs. This can be different than the
        // balances before creating the commitment transaction as one party must
        // pay the commitment fee.
        ourBalance lnwire.MilliSatoshi

        // theirBalance is their balance of this commitment *after* subtracting
        // commitment fees and anchor outputs. This can be different than the
        // balances before creating the commitment transaction as one party must
        // pay the commitment fee.
        theirBalance lnwire.MilliSatoshi

        // cltvs is a sorted list of CLTV deltas for each HTLC on the commitment
        // transaction. Any non-htlc outputs will have a CLTV delay of zero.
        cltvs []uint32
}

// createUnsignedCommitmentTx generates the unsigned commitment transaction for
// a commitment view and returns it as part of the unsignedCommitmentTx. The
// passed in balances should be balances *before* subtracting any commitment
// fees, but after anchor outputs.
func (cb *CommitmentBuilder) createUnsignedCommitmentTx(ourBalance,
        theirBalance lnwire.MilliSatoshi, whoseCommit lntypes.ChannelParty,
        feePerKw chainfee.SatPerKWeight, height uint64, originalHtlcView,
        filteredHTLCView *HtlcView, keyRing *CommitmentKeyRing,
        prevCommit *commitment) (*unsignedCommitmentTx, error) {

        dustLimit := cb.chanState.LocalChanCfg.DustLimit
        if whoseCommit.IsRemote() {
                dustLimit = cb.chanState.RemoteChanCfg.DustLimit
        }

        numHTLCs := int64(0)
        for _, htlc := range filteredHTLCView.Updates.Local {
                if HtlcIsDust(
                        cb.chanState.ChanType, false, whoseCommit, feePerKw,
                        htlc.Amount.ToSatoshis(), dustLimit,
                ) {

                        continue
                }

                numHTLCs++
        }
        for _, htlc := range filteredHTLCView.Updates.Remote {
                if HtlcIsDust(
                        cb.chanState.ChanType, true, whoseCommit, feePerKw,
                        htlc.Amount.ToSatoshis(), dustLimit,
                ) {

                        continue
                }

                numHTLCs++
        }

        // Next, we'll calculate the fee for the commitment transaction based
        // on its total weight. Once we have the total weight, we'll multiply
        // by the current fee-per-kw, then divide by 1000 to get the proper
        // fee.
        totalCommitWeight := CommitWeight(cb.chanState.ChanType) +
                lntypes.WeightUnit(input.HTLCWeight*numHTLCs)

        // With the weight known, we can now calculate the commitment fee,
        // ensuring that we account for any dust outputs trimmed above.
        commitFee := feePerKw.FeeForWeight(totalCommitWeight)
        commitFeeMSat := lnwire.NewMSatFromSatoshis(commitFee)

        // Currently, within the protocol, the initiator always pays the fees.
        // So we'll subtract the fee amount from the balance of the current
        // initiator. If the initiator is unable to pay the fee fully, then
        // their entire output is consumed.
        switch {
        case cb.chanState.IsInitiator && commitFee > ourBalance.ToSatoshis():
                ourBalance = 0

        case cb.chanState.IsInitiator:
                ourBalance -= commitFeeMSat

        case !cb.chanState.IsInitiator && commitFee > theirBalance.ToSatoshis():
                theirBalance = 0

        case !cb.chanState.IsInitiator:
                theirBalance -= commitFeeMSat
        }

        var commitTx *wire.MsgTx

        // Before we create the commitment transaction below, we'll try to see
        // if there're any aux leaves that need to be a part of the tapscript
        // tree. We'll only do this if we have a custom blob defined though.
        auxResult, err := fn.MapOptionZ(
                cb.auxLeafStore,
                func(s AuxLeafStore) fn.Result[CommitDiffAuxResult] {
                        return auxLeavesFromView(
                                s, cb.chanState, prevCommit.customBlob,
                                originalHtlcView, whoseCommit, ourBalance,
                                theirBalance, *keyRing,
                        )
                },
        ).Unpack()
        if err != nil {
                return nil, fmt.Errorf("unable to fetch aux leaves: %w", err)
        }

        // Depending on whether the transaction is ours or not, we call
        // CreateCommitTx with parameters matching the perspective, to generate
        // a new commitment transaction with all the latest unsettled/un-timed
        // out HTLCs.
        var leaseExpiry uint32
        if cb.chanState.ChanType.HasLeaseExpiration() {
                leaseExpiry = cb.chanState.ThawHeight
        }
        if whoseCommit.IsLocal() {
                commitTx, err = CreateCommitTx(
                        cb.chanState.ChanType, fundingTxIn(cb.chanState), keyRing,
                        &cb.chanState.LocalChanCfg, &cb.chanState.RemoteChanCfg,
                        ourBalance.ToSatoshis(), theirBalance.ToSatoshis(),
                        numHTLCs, cb.chanState.IsInitiator, leaseExpiry,
                        auxResult.AuxLeaves,
                )
        } else {
                commitTx, err = CreateCommitTx(
                        cb.chanState.ChanType, fundingTxIn(cb.chanState), keyRing,
                        &cb.chanState.RemoteChanCfg, &cb.chanState.LocalChanCfg,
                        theirBalance.ToSatoshis(), ourBalance.ToSatoshis(),
                        numHTLCs, !cb.chanState.IsInitiator, leaseExpiry,
                        auxResult.AuxLeaves,
                )
        }
        if err != nil {
                return nil, err
        }

        // Similarly, we'll now attempt to extract the set of aux leaves for
        // the set of incoming and outgoing HTLCs.
        incomingAuxLeaves := fn.MapOption(
                func(leaves CommitAuxLeaves) input.HtlcAuxLeaves {
                        return leaves.IncomingHtlcLeaves
                },
        )(auxResult.AuxLeaves)
        outgoingAuxLeaves := fn.MapOption(
                func(leaves CommitAuxLeaves) input.HtlcAuxLeaves {
                        return leaves.OutgoingHtlcLeaves
                },
        )(auxResult.AuxLeaves)

        // We'll now add all the HTLC outputs to the commitment transaction.
        // Each output includes an off-chain 2-of-2 covenant clause, so we'll
        // need the objective local/remote keys for this particular commitment
        // as well. For any non-dust HTLCs that are manifested on the commitment
        // transaction, we'll also record its CLTV which is required to sort the
        // commitment transaction below. The slice is initially sized to the
        // number of existing outputs, since any outputs already added are
        // commitment outputs and should correspond to zero values for the
        // purposes of sorting.
        cltvs := make([]uint32, len(commitTx.TxOut))
        htlcIndexes := make([]input.HtlcIndex, len(commitTx.TxOut))
        for _, htlc := range filteredHTLCView.Updates.Local {
                if HtlcIsDust(
                        cb.chanState.ChanType, false, whoseCommit, feePerKw,
                        htlc.Amount.ToSatoshis(), dustLimit,
                ) {

                        continue
                }

                auxLeaf := fn.ChainOption(
                        func(leaves input.HtlcAuxLeaves) input.AuxTapLeaf {
                                return leaves[htlc.HtlcIndex].AuxTapLeaf
                        },
                )(outgoingAuxLeaves)

                err := addHTLC(
                        commitTx, whoseCommit, false, htlc, keyRing,
                        cb.chanState.ChanType, auxLeaf,
                )
                if err != nil {
                        return nil, err
                }

                // We want to add the CLTV and HTLC index to their respective
                // slices, even if we already pre-allocated them.
                cltvs = append(cltvs, htlc.Timeout)               //nolint
                htlcIndexes = append(htlcIndexes, htlc.HtlcIndex) //nolint
        }
        for _, htlc := range filteredHTLCView.Updates.Remote {
                if HtlcIsDust(
                        cb.chanState.ChanType, true, whoseCommit, feePerKw,
                        htlc.Amount.ToSatoshis(), dustLimit,
                ) {

                        continue
                }

                auxLeaf := fn.ChainOption(
                        func(leaves input.HtlcAuxLeaves) input.AuxTapLeaf {
                                return leaves[htlc.HtlcIndex].AuxTapLeaf
                        },
                )(incomingAuxLeaves)

                err := addHTLC(
                        commitTx, whoseCommit, true, htlc, keyRing,
                        cb.chanState.ChanType, auxLeaf,
                )
                if err != nil {
                        return nil, err
                }

                // We want to add the CLTV and HTLC index to their respective
                // slices, even if we already pre-allocated them.
                cltvs = append(cltvs, htlc.Timeout)               //nolint
                htlcIndexes = append(htlcIndexes, htlc.HtlcIndex) //nolint
        }

        // Set the state hint of the commitment transaction to facilitate
        // quickly recovering the necessary penalty state in the case of an
        // uncooperative broadcast.
        err = SetStateNumHint(commitTx, height, cb.obfuscator)
        if err != nil {
                return nil, err
        }

        // Sort the transactions according to the agreed upon canonical
        // ordering (which might be customized for custom channel types, but
        // deterministic and both parties will arrive at the same result). This
        // lets us skip sending the entire transaction over, instead we'll just
        // send signatures.
        commitSort := auxResult.CommitSortFunc.UnwrapOr(DefaultCommitSort)
        err = commitSort(commitTx, cltvs, htlcIndexes)
        if err != nil {
                return nil, fmt.Errorf("unable to sort commitment "+
                        "transaction: %w", err)
        }

        // Next, we'll ensure that we don't accidentally create a commitment
        // transaction which would be invalid by consensus.
        uTx := btcutil.NewTx(commitTx)
        if err := blockchain.CheckTransactionSanity(uTx); err != nil {
                return nil, err
        }

        // Finally, we'll assert that were not attempting to draw more out of
        // the channel that was originally placed within it.
        var totalOut btcutil.Amount
        for _, txOut := range commitTx.TxOut {
                totalOut += btcutil.Amount(txOut.Value)
        }
        if totalOut+commitFee > cb.chanState.Capacity {
                return nil, fmt.Errorf("height=%v, for ChannelPoint(%v) "+
                        "attempts to consume %v while channel capacity is %v",
                        height, cb.chanState.FundingOutpoint,
                        totalOut+commitFee, cb.chanState.Capacity)
        }

        return &unsignedCommitmentTx{
                txn:          commitTx,
                fee:          commitFee,
                ourBalance:   ourBalance,
                theirBalance: theirBalance,
                cltvs:        cltvs,
        }, nil
}

// CreateCommitTx creates a commitment transaction, spending from specified
// funding output. The commitment transaction contains two outputs: one local
// output paying to the "owner" of the commitment transaction which can be
// spent after a relative block delay or revocation event, and a remote output
// paying the counterparty within the channel, which can be spent immediately
// or after a delay depending on the commitment type. The `initiator` argument
// should correspond to the owner of the commitment transaction we are creating.
func CreateCommitTx(chanType channeldb.ChannelType,
        fundingOutput wire.TxIn, keyRing *CommitmentKeyRing,
        localChanCfg, remoteChanCfg *channeldb.ChannelConfig,
        amountToLocal, amountToRemote btcutil.Amount,
        numHTLCs int64, initiator bool, leaseExpiry uint32,
        auxLeaves fn.Option[CommitAuxLeaves]) (*wire.MsgTx, error) {

        // First, we create the script for the delayed "pay-to-self" output.
        // This output has 2 main redemption clauses: either we can redeem the
        // output after a relative block delay, or the remote node can claim
        // the funds with the revocation key if we broadcast a revoked
        // commitment transaction.
        localAuxLeaf := fn.MapOption(func(l CommitAuxLeaves) input.AuxTapLeaf {
                return l.LocalAuxLeaf
        })(auxLeaves)
        toLocalScript, err := CommitScriptToSelf(
                chanType, initiator, keyRing.ToLocalKey, keyRing.RevocationKey,
                uint32(localChanCfg.CsvDelay), leaseExpiry,
                fn.FlattenOption(localAuxLeaf),
        )
        if err != nil {
                return nil, err
        }

        // Next, we create the script paying to the remote.
        remoteAuxLeaf := fn.MapOption(func(l CommitAuxLeaves) input.AuxTapLeaf {
                return l.RemoteAuxLeaf
        })(auxLeaves)
        toRemoteScript, _, err := CommitScriptToRemote(
                chanType, initiator, keyRing.ToRemoteKey, leaseExpiry,
                fn.FlattenOption(remoteAuxLeaf),
        )
        if err != nil {
                return nil, err
        }

        // Now that both output scripts have been created, we can finally create
        // the transaction itself. We use a transaction version of 2 since CSV
        // will fail unless the tx version is >= 2.
        commitTx := wire.NewMsgTx(2)
        commitTx.AddTxIn(&fundingOutput)

        // Avoid creating dust outputs within the commitment transaction.
        localOutput := amountToLocal >= localChanCfg.DustLimit
        if localOutput {
                commitTx.AddTxOut(&wire.TxOut{
                        PkScript: toLocalScript.PkScript(),
                        Value:    int64(amountToLocal),
                })
        }

        remoteOutput := amountToRemote >= localChanCfg.DustLimit
        if remoteOutput {
                commitTx.AddTxOut(&wire.TxOut{
                        PkScript: toRemoteScript.PkScript(),
                        Value:    int64(amountToRemote),
                })
        }

        // If this channel type has anchors, we'll also add those.
        if chanType.HasAnchors() {
                localAnchor, remoteAnchor, err := CommitScriptAnchors(
                        chanType, localChanCfg, remoteChanCfg, keyRing,
                )
                if err != nil {
                        return nil, err
                }

                // Add local anchor output only if we have a commitment output
                // or there are HTLCs.
                if localOutput || numHTLCs > 0 {
                        commitTx.AddTxOut(&wire.TxOut{
                                PkScript: localAnchor.PkScript(),
                                Value:    int64(AnchorSize),
                        })
                }

                // Add anchor output to remote only if they have a commitment
                // output or there are HTLCs.
                if remoteOutput || numHTLCs > 0 {
                        commitTx.AddTxOut(&wire.TxOut{
                                PkScript: remoteAnchor.PkScript(),
                                Value:    int64(AnchorSize),
                        })
                }
        }

        return commitTx, nil
}

// CoopCloseBalance returns the final balances that should be used to create
// the cooperative close tx, given the channel type and transaction fee.
func CoopCloseBalance(chanType channeldb.ChannelType, isInitiator bool,
        coopCloseFee, ourBalance, theirBalance,
        commitFee btcutil.Amount) (btcutil.Amount, btcutil.Amount, error) {

        // We'll make sure we account for the complete balance by adding the
        // current dangling commitment fee to the balance of the initiator.
        initiatorDelta := commitFee

        // Since the initiator's balance also is stored after subtracting the
        // anchor values, add that back in case this was an anchor commitment.
        if chanType.HasAnchors() {
                initiatorDelta += 2 * AnchorSize
        }

        // The initiator will pay the full coop close fee, subtract that value
        // from their balance.
        initiatorDelta -= coopCloseFee

        if isInitiator {
                ourBalance += initiatorDelta
        } else {
                theirBalance += initiatorDelta
        }

        // During fee negotiation it should always be verified that the
        // initiator can pay the proposed fee, but we do a sanity check just to
        // be sure here.
        if ourBalance < 0 || theirBalance < 0 {
                return 0, 0, fmt.Errorf("initiator cannot afford proposed " +
                        "coop close fee")
        }

        return ourBalance, theirBalance, nil
}

// genSegwitV0HtlcScript generates the HTLC scripts for a normal segwit v0
// channel.
func genSegwitV0HtlcScript(chanType channeldb.ChannelType,
        isIncoming bool, whoseCommit lntypes.ChannelParty, timeout uint32,
        rHash [32]byte, keyRing *CommitmentKeyRing,
) (*WitnessScriptDesc, error) {

        var (
                witnessScript []byte
                err           error
        )

        // Choose scripts based on channel type.
        confirmedHtlcSpends := false
        if chanType.HasAnchors() {
                confirmedHtlcSpends = true
        }

        // Generate the proper redeem scripts for the HTLC output modified by
        // two-bits denoting if this is an incoming HTLC, and if the HTLC is
        // being applied to their commitment transaction or ours.
        switch {
        // The HTLC is paying to us, and being applied to our commitment
        // transaction. So we need to use the receiver's version of the HTLC
        // script.
        case isIncoming && whoseCommit.IsLocal():
                witnessScript, err = input.ReceiverHTLCScript(
                        timeout, keyRing.RemoteHtlcKey, keyRing.LocalHtlcKey,
                        keyRing.RevocationKey, rHash[:], confirmedHtlcSpends,
                )

        // We're being paid via an HTLC by the remote party, and the HTLC is
        // being added to their commitment transaction, so we use the sender's
        // version of the HTLC script.
        case isIncoming && whoseCommit.IsRemote():
                witnessScript, err = input.SenderHTLCScript(
                        keyRing.RemoteHtlcKey, keyRing.LocalHtlcKey,
                        keyRing.RevocationKey, rHash[:], confirmedHtlcSpends,
                )

        // We're sending an HTLC which is being added to our commitment
        // transaction. Therefore, we need to use the sender's version of the
        // HTLC script.
        case !isIncoming && whoseCommit.IsLocal():
                witnessScript, err = input.SenderHTLCScript(
                        keyRing.LocalHtlcKey, keyRing.RemoteHtlcKey,
                        keyRing.RevocationKey, rHash[:], confirmedHtlcSpends,
                )

        // Finally, we're paying the remote party via an HTLC, which is being
        // added to their commitment transaction. Therefore, we use the
        // receiver's version of the HTLC script.
        case !isIncoming && whoseCommit.IsRemote():
                witnessScript, err = input.ReceiverHTLCScript(
                        timeout, keyRing.LocalHtlcKey, keyRing.RemoteHtlcKey,
                        keyRing.RevocationKey, rHash[:], confirmedHtlcSpends,
                )
        }
        if err != nil {
                return nil, err
        }

        // Now that we have the redeem scripts, create the P2WSH public key
        // script for the output itself.
        htlcP2WSH, err := input.WitnessScriptHash(witnessScript)
        if err != nil {
                return nil, err
        }

        return &WitnessScriptDesc{
                OutputScript:  htlcP2WSH,
                WitnessScript: witnessScript,
        }, nil
}

// GenTaprootHtlcScript generates the HTLC scripts for a taproot+musig2
// channel.
func GenTaprootHtlcScript(isIncoming bool, whoseCommit lntypes.ChannelParty,
        timeout uint32, rHash [32]byte, keyRing *CommitmentKeyRing,
        auxLeaf input.AuxTapLeaf) (*input.HtlcScriptTree, error) {

        var (
                htlcScriptTree *input.HtlcScriptTree
                err            error
        )

        // Generate the proper redeem scripts for the HTLC output modified by
        // two-bits denoting if this is an incoming HTLC, and if the HTLC is
        // being applied to their commitment transaction or ours.
        switch {
        // The HTLC is paying to us, and being applied to our commitment
        // transaction. So we need to use the receiver's version of HTLC the
        // script.
        case isIncoming && whoseCommit.IsLocal():
                htlcScriptTree, err = input.ReceiverHTLCScriptTaproot(
                        timeout, keyRing.RemoteHtlcKey, keyRing.LocalHtlcKey,
                        keyRing.RevocationKey, rHash[:], whoseCommit, auxLeaf,
                )

        // We're being paid via an HTLC by the remote party, and the HTLC is
        // being added to their commitment transaction, so we use the sender's
        // version of the HTLC script.
        case isIncoming && whoseCommit.IsRemote():
                htlcScriptTree, err = input.SenderHTLCScriptTaproot(
                        keyRing.RemoteHtlcKey, keyRing.LocalHtlcKey,
                        keyRing.RevocationKey, rHash[:], whoseCommit, auxLeaf,
                )

        // We're sending an HTLC which is being added to our commitment
        // transaction. Therefore, we need to use the sender's version of the
        // HTLC script.
        case !isIncoming && whoseCommit.IsLocal():
                htlcScriptTree, err = input.SenderHTLCScriptTaproot(
                        keyRing.LocalHtlcKey, keyRing.RemoteHtlcKey,
                        keyRing.RevocationKey, rHash[:], whoseCommit, auxLeaf,
                )

        // Finally, we're paying the remote party via an HTLC, which is being
        // added to their commitment transaction. Therefore, we use the
        // receiver's version of the HTLC script.
        case !isIncoming && whoseCommit.IsRemote():
                htlcScriptTree, err = input.ReceiverHTLCScriptTaproot(
                        timeout, keyRing.LocalHtlcKey, keyRing.RemoteHtlcKey,
                        keyRing.RevocationKey, rHash[:], whoseCommit, auxLeaf,
                )
        }

        return htlcScriptTree, err
}

// genHtlcScript generates the proper P2WSH public key scripts for the HTLC
// output modified by two-bits denoting if this is an incoming HTLC, and if the
// HTLC is being applied to their commitment transaction or ours. A script
// multiplexer for the various spending paths is returned. The script path that
// we need to sign for the remote party (2nd level HTLCs) is also returned
// along side the multiplexer.
func genHtlcScript(chanType channeldb.ChannelType, isIncoming bool,
        whoseCommit lntypes.ChannelParty, timeout uint32, rHash [32]byte,
        keyRing *CommitmentKeyRing,
        auxLeaf input.AuxTapLeaf) (input.ScriptDescriptor, error) {

        if !chanType.IsTaproot() {
                return genSegwitV0HtlcScript(
                        chanType, isIncoming, whoseCommit, timeout, rHash,
                        keyRing,
                )
        }

        return GenTaprootHtlcScript(
                isIncoming, whoseCommit, timeout, rHash, keyRing, auxLeaf,
        )
}

// addHTLC adds a new HTLC to the passed commitment transaction. One of four
// full scripts will be generated for the HTLC output depending on if the HTLC
// is incoming and if it's being applied to our commitment transaction or that
// of the remote node's. Additionally, in order to be able to efficiently
// locate the added HTLC on the commitment transaction from the
// paymentDescriptor that generated it, the generated script is stored within
// the descriptor itself.
func addHTLC(commitTx *wire.MsgTx, whoseCommit lntypes.ChannelParty,
        isIncoming bool, paymentDesc *paymentDescriptor,
        keyRing *CommitmentKeyRing, chanType channeldb.ChannelType,
        auxLeaf input.AuxTapLeaf) error {

        timeout := paymentDesc.Timeout
        rHash := paymentDesc.RHash

        scriptInfo, err := genHtlcScript(
                chanType, isIncoming, whoseCommit, timeout, rHash, keyRing,
                auxLeaf,
        )
        if err != nil {
                return err
        }

        pkScript := scriptInfo.PkScript()

        // Add the new HTLC outputs to the respective commitment transactions.
        amountPending := int64(paymentDesc.Amount.ToSatoshis())
        commitTx.AddTxOut(wire.NewTxOut(amountPending, pkScript))

        // Store the pkScript of this particular paymentDescriptor so we can
        // quickly locate it within the commitment transaction later.
        if whoseCommit.IsLocal() {
                paymentDesc.ourPkScript = pkScript

                paymentDesc.ourWitnessScript = scriptInfo.WitnessScriptToSign()
        } else {
                paymentDesc.theirPkScript = pkScript

                //nolint:lll
                paymentDesc.theirWitnessScript = scriptInfo.WitnessScriptToSign()
        }

        return nil
}

// findOutputIndexesFromRemote finds the index of our and their outputs from
// the remote commitment transaction. It derives the key ring to compute the
// output scripts and compares them against the outputs inside the commitment
// to find the match.
func findOutputIndexesFromRemote(revocationPreimage *chainhash.Hash,
        chanState *channeldb.OpenChannel,
        leafStore fn.Option[AuxLeafStore]) (uint32, uint32, error) {

        // Init the output indexes as empty.
        ourIndex := uint32(channeldb.OutputIndexEmpty)
        theirIndex := uint32(channeldb.OutputIndexEmpty)

        chanCommit := chanState.RemoteCommitment
        _, commitmentPoint := btcec.PrivKeyFromBytes(revocationPreimage[:])

        // With the commitment point generated, we can now derive the king ring
        // which will be used to generate the output scripts.
        keyRing := DeriveCommitmentKeys(
                commitmentPoint, lntypes.Remote, chanState.ChanType,
                &chanState.LocalChanCfg, &chanState.RemoteChanCfg,
        )

        // Since it's remote commitment chain, we'd used the mirrored values.
        //
        // We use the remote's channel config for the csv delay.
        theirDelay := uint32(chanState.RemoteChanCfg.CsvDelay)

        // If we are the initiator of this channel, then it's be false from the
        // remote's PoV.
        isRemoteInitiator := !chanState.IsInitiator

        var leaseExpiry uint32
        if chanState.ChanType.HasLeaseExpiration() {
                leaseExpiry = chanState.ThawHeight
        }

        // If we have a custom blob, then we'll attempt to fetch the aux leaves
        // for this state.
        auxResult, err := fn.MapOptionZ(
                leafStore, func(a AuxLeafStore) fn.Result[CommitDiffAuxResult] {
                        return a.FetchLeavesFromCommit(
                                NewAuxChanState(chanState), chanCommit,
                                *keyRing,
                        )
                },
        ).Unpack()
        if err != nil {
                return ourIndex, theirIndex, fmt.Errorf("unable to fetch aux "+
                        "leaves: %w", err)
        }

        // Map the scripts from our PoV. When facing a local commitment, the
        // to_local output belongs to us and the to_remote output belongs to
        // them. When facing a remote commitment, the to_local output belongs to
        // them and the to_remote output belongs to us.

        // Compute the to_local script. From our PoV, when facing a remote
        // commitment, the to_local output belongs to them.
        localAuxLeaf := fn.ChainOption(
                func(l CommitAuxLeaves) input.AuxTapLeaf {
                        return l.LocalAuxLeaf
                },
        )(auxResult.AuxLeaves)
        theirScript, err := CommitScriptToSelf(
                chanState.ChanType, isRemoteInitiator, keyRing.ToLocalKey,
                keyRing.RevocationKey, theirDelay, leaseExpiry, localAuxLeaf,
        )
        if err != nil {
                return ourIndex, theirIndex, err
        }

        // Compute the to_remote script. From our PoV, when facing a remote
        // commitment, the to_remote output belongs to us.
        remoteAuxLeaf := fn.ChainOption(
                func(l CommitAuxLeaves) input.AuxTapLeaf {
                        return l.RemoteAuxLeaf
                },
        )(auxResult.AuxLeaves)
        ourScript, _, err := CommitScriptToRemote(
                chanState.ChanType, isRemoteInitiator, keyRing.ToRemoteKey,
                leaseExpiry, remoteAuxLeaf,
        )
        if err != nil {
                return ourIndex, theirIndex, err
        }

        // Now compare the scripts to find our/their output index.
        for i, txOut := range chanCommit.CommitTx.TxOut {
                switch {
                case bytes.Equal(txOut.PkScript, ourScript.PkScript()):
                        ourIndex = uint32(i)
                case bytes.Equal(txOut.PkScript, theirScript.PkScript()):
                        theirIndex = uint32(i)
                }
        }

        return ourIndex, theirIndex, nil
}

lightningnetwork / lnd / 11216766535

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous