12199391122

Committed 06 Dec 2024 01:10PM UTC coverage: 49.807% (-9.1%) from 58.933%

Build # 12199391122

Build Type

push

github

Committed by

web-flow

Commit Message

Merge pull request #9337 from Guayaba221/patch-1

chore: fix typo in ruby.md

Run Details

100137 of 201051 relevant lines covered (49.81%)

2.07 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

78.12

/contractcourt/chain_watcher.go

package contractcourt

import (
        "bytes"
        "fmt"
        "slices"
        "sync"
        "sync/atomic"
        "time"

        "github.com/btcsuite/btcd/btcec/v2"
        "github.com/btcsuite/btcd/btcutil"
        "github.com/btcsuite/btcd/chaincfg"
        "github.com/btcsuite/btcd/chaincfg/chainhash"
        "github.com/btcsuite/btcd/mempool"
        "github.com/btcsuite/btcd/txscript"
        "github.com/btcsuite/btcd/wire"
        "github.com/davecgh/go-spew/spew"
        "github.com/lightningnetwork/lnd/chainntnfs"
        "github.com/lightningnetwork/lnd/channeldb"
        "github.com/lightningnetwork/lnd/fn"
        "github.com/lightningnetwork/lnd/input"
        "github.com/lightningnetwork/lnd/lntypes"
        "github.com/lightningnetwork/lnd/lnutils"
        "github.com/lightningnetwork/lnd/lnwallet"
        "github.com/lightningnetwork/lnd/lnwire"
)

const (
        // minCommitPointPollTimeout is the minimum time we'll wait before
        // polling the database for a channel's commitpoint.
        minCommitPointPollTimeout = 1 * time.Second

        // maxCommitPointPollTimeout is the maximum time we'll wait before
        // polling the database for a channel's commitpoint.
        maxCommitPointPollTimeout = 10 * time.Minute
)

// LocalUnilateralCloseInfo encapsulates all the information we need to act on
// a local force close that gets confirmed.
type LocalUnilateralCloseInfo struct {
        *chainntnfs.SpendDetail
        *lnwallet.LocalForceCloseSummary
        *channeldb.ChannelCloseSummary

        // CommitSet is the set of known valid commitments at the time the
        // remote party's commitment hit the chain.
        CommitSet CommitSet
}

// CooperativeCloseInfo encapsulates all the information we need to act on a
// cooperative close that gets confirmed.
type CooperativeCloseInfo struct {
        *channeldb.ChannelCloseSummary
}

// RemoteUnilateralCloseInfo wraps the normal UnilateralCloseSummary to couple
// the CommitSet at the time of channel closure.
type RemoteUnilateralCloseInfo struct {
        *lnwallet.UnilateralCloseSummary

        // CommitSet is the set of known valid commitments at the time the
        // remote party's commitment hit the chain.
        CommitSet CommitSet
}

// BreachResolution wraps the outpoint of the breached channel.
type BreachResolution struct {
        FundingOutPoint wire.OutPoint
}

// BreachCloseInfo wraps the BreachResolution with a CommitSet for the latest,
// non-breached state, with the AnchorResolution for the breached state.
type BreachCloseInfo struct {
        *BreachResolution
        *lnwallet.AnchorResolution

        // CommitHash is the hash of the commitment transaction.
        CommitHash chainhash.Hash

        // CommitSet is the set of known valid commitments at the time the
        // breach occurred on-chain.
        CommitSet CommitSet

        // CloseSummary gives the recipient of the BreachCloseInfo information
        // to mark the channel closed in the database.
        CloseSummary channeldb.ChannelCloseSummary
}

// CommitSet is a collection of the set of known valid commitments at a given
// instant. If ConfCommitKey is set, then the commitment identified by the
// HtlcSetKey has hit the chain. This struct will be used to examine all live
// HTLCs to determine if any additional actions need to be made based on the
// remote party's commitments.
type CommitSet struct {
        // When the ConfCommitKey is set, it signals that the commitment tx was
        // confirmed in the chain.
        ConfCommitKey fn.Option[HtlcSetKey]

        // HtlcSets stores the set of all known active HTLC for each active
        // commitment at the time of channel closure.
        HtlcSets map[HtlcSetKey][]channeldb.HTLC
}

// IsEmpty returns true if there are no HTLCs at all within all commitments
// that are a part of this commitment diff.
func (c *CommitSet) IsEmpty() bool {
        if c == nil {
                return true
        }

        for _, htlcs := range c.HtlcSets {
                if len(htlcs) != 0 {
                        return false
                }
        }

        return true
}

// toActiveHTLCSets returns the set of all active HTLCs across all commitment
// transactions.
func (c *CommitSet) toActiveHTLCSets() map[HtlcSetKey]htlcSet {
        htlcSets := make(map[HtlcSetKey]htlcSet)

        for htlcSetKey, htlcs := range c.HtlcSets {
                htlcSets[htlcSetKey] = newHtlcSet(htlcs)
        }

        return htlcSets
}

// ChainEventSubscription is a struct that houses a subscription to be notified
// for any on-chain events related to a channel. There are three types of
// possible on-chain events: a cooperative channel closure, a unilateral
// channel closure, and a channel breach. The fourth type: a force close is
// locally initiated, so we don't provide any event stream for said event.
type ChainEventSubscription struct {
        // ChanPoint is that channel that chain events will be dispatched for.
        ChanPoint wire.OutPoint

        // RemoteUnilateralClosure is a channel that will be sent upon in the
        // event that the remote party's commitment transaction is confirmed.
        RemoteUnilateralClosure chan *RemoteUnilateralCloseInfo

        // LocalUnilateralClosure is a channel that will be sent upon in the
        // event that our commitment transaction is confirmed.
        LocalUnilateralClosure chan *LocalUnilateralCloseInfo

        // CooperativeClosure is a signal that will be sent upon once a
        // cooperative channel closure has been detected confirmed.
        CooperativeClosure chan *CooperativeCloseInfo

        // ContractBreach is a channel that will be sent upon if we detect a
        // contract breach. The struct sent across the channel contains all the
        // material required to bring the cheating channel peer to justice.
        ContractBreach chan *BreachCloseInfo

        // Cancel cancels the subscription to the event stream for a particular
        // channel. This method should be called once the caller no longer needs to
        // be notified of any on-chain events for a particular channel.
        Cancel func()
}

// chainWatcherConfig encapsulates all the necessary functions and interfaces
// needed to watch and act on on-chain events for a particular channel.
type chainWatcherConfig struct {
        // chanState is a snapshot of the persistent state of the channel that
        // we're watching. In the event of an on-chain event, we'll query the
        // database to ensure that we act using the most up to date state.
        chanState *channeldb.OpenChannel

        // notifier is a reference to the channel notifier that we'll use to be
        // notified of output spends and when transactions are confirmed.
        notifier chainntnfs.ChainNotifier

        // signer is the main signer instances that will be responsible for
        // signing any HTLC and commitment transaction generated by the state
        // machine.
        signer input.Signer

        // contractBreach is a method that will be called by the watcher if it
        // detects that a contract breach transaction has been confirmed. It
        // will only return a non-nil error when the BreachArbitrator has
        // preserved the necessary breach info for this channel point.
        contractBreach func(*lnwallet.BreachRetribution) error

        // isOurAddr is a function that returns true if the passed address is
        // known to us.
        isOurAddr func(btcutil.Address) bool

        // extractStateNumHint extracts the encoded state hint using the passed
        // obfuscater. This is used by the chain watcher to identify which
        // state was broadcast and confirmed on-chain.
        extractStateNumHint func(*wire.MsgTx, [lnwallet.StateHintSize]byte) uint64

        // auxLeafStore can be used to fetch information for custom channels.
        auxLeafStore fn.Option[lnwallet.AuxLeafStore]

        // auxResolver is used to supplement contract resolution.
        auxResolver fn.Option[lnwallet.AuxContractResolver]
}

// chainWatcher is a system that's assigned to every active channel. The duty
// of this system is to watch the chain for spends of the channels chan point.
// If a spend is detected then with chain watcher will notify all subscribers
// that the channel has been closed, and also give them the materials necessary
// to sweep the funds of the channel on chain eventually.
type chainWatcher struct {
        started int32 // To be used atomically.
        stopped int32 // To be used atomically.

        quit chan struct{}
        wg   sync.WaitGroup

        cfg chainWatcherConfig

        // stateHintObfuscator is a 48-bit state hint that's used to obfuscate
        // the current state number on the commitment transactions.
        stateHintObfuscator [lnwallet.StateHintSize]byte

        // fundingPkScript is the pkScript of the funding output.
        fundingPkScript []byte

        // heightHint is the height hint used to checkpoint scans on chain for
        // conf/spend events.
        heightHint uint32

        // All the fields below are protected by this mutex.
        sync.Mutex

        // clientID is an ephemeral counter used to keep track of each
        // individual client subscription.
        clientID uint64

        // clientSubscriptions is a map that keeps track of all the active
        // client subscriptions for events related to this channel.
        clientSubscriptions map[uint64]*ChainEventSubscription
}

// newChainWatcher returns a new instance of a chainWatcher for a channel given
// the chan point to watch, and also a notifier instance that will allow us to
// detect on chain events.
func newChainWatcher(cfg chainWatcherConfig) (*chainWatcher, error) {
        // In order to be able to detect the nature of a potential channel
        // closure we'll need to reconstruct the state hint bytes used to
        // obfuscate the commitment state number encoded in the lock time and
        // sequence fields.
        var stateHint [lnwallet.StateHintSize]byte
        chanState := cfg.chanState
        if chanState.IsInitiator {
                stateHint = lnwallet.DeriveStateHintObfuscator(
                        chanState.LocalChanCfg.PaymentBasePoint.PubKey,
                        chanState.RemoteChanCfg.PaymentBasePoint.PubKey,
                )
        } else {
                stateHint = lnwallet.DeriveStateHintObfuscator(
                        chanState.RemoteChanCfg.PaymentBasePoint.PubKey,
                        chanState.LocalChanCfg.PaymentBasePoint.PubKey,
                )
        }

        return &chainWatcher{
                cfg:                 cfg,
                stateHintObfuscator: stateHint,
                quit:                make(chan struct{}),
                clientSubscriptions: make(map[uint64]*ChainEventSubscription),
        }, nil
}

// Start starts all goroutines that the chainWatcher needs to perform its
// duties.
func (c *chainWatcher) Start() error {
        if !atomic.CompareAndSwapInt32(&c.started, 0, 1) {
                return nil
        }

        chanState := c.cfg.chanState
        log.Debugf("Starting chain watcher for ChannelPoint(%v)",
                chanState.FundingOutpoint)

        // First, we'll register for a notification to be dispatched if the
        // funding output is spent.
        fundingOut := &chanState.FundingOutpoint

        // As a height hint, we'll try to use the opening height, but if the
        // channel isn't yet open, then we'll use the height it was broadcast
        // at. This may be an unconfirmed zero-conf channel.
        c.heightHint = c.cfg.chanState.ShortChanID().BlockHeight
        if c.heightHint == 0 {
                c.heightHint = chanState.BroadcastHeight()
        }

        // Since no zero-conf state is stored in a channel backup, the below
        // logic will not be triggered for restored, zero-conf channels. Set
        // the height hint for zero-conf channels.
        if chanState.IsZeroConf() {
                if chanState.ZeroConfConfirmed() {
                        // If the zero-conf channel is confirmed, we'll use the
                        // confirmed SCID's block height.
                        c.heightHint = chanState.ZeroConfRealScid().BlockHeight
                } else {
                        // The zero-conf channel is unconfirmed. We'll need to
                        // use the FundingBroadcastHeight.
                        c.heightHint = chanState.BroadcastHeight()
                }
        }

        localKey := chanState.LocalChanCfg.MultiSigKey.PubKey
        remoteKey := chanState.RemoteChanCfg.MultiSigKey.PubKey

        var (
                err error
        )
        if chanState.ChanType.IsTaproot() {
                c.fundingPkScript, _, err = input.GenTaprootFundingScript(
                        localKey, remoteKey, 0, chanState.TapscriptRoot,
                )
                if err != nil {
                        return err
                }
        } else {
                multiSigScript, err := input.GenMultiSigScript(
                        localKey.SerializeCompressed(),
                        remoteKey.SerializeCompressed(),
                )
                if err != nil {
                        return err
                }
                c.fundingPkScript, err = input.WitnessScriptHash(multiSigScript)
                if err != nil {
                        return err
                }
        }

        spendNtfn, err := c.cfg.notifier.RegisterSpendNtfn(
                fundingOut, c.fundingPkScript, c.heightHint,
        )
        if err != nil {
                return err
        }

        // With the spend notification obtained, we'll now dispatch the
        // closeObserver which will properly react to any changes.
        c.wg.Add(1)
        go c.closeObserver(spendNtfn)

        return nil
}

// Stop signals the close observer to gracefully exit.
func (c *chainWatcher) Stop() error {
        if !atomic.CompareAndSwapInt32(&c.stopped, 0, 1) {
                return nil
        }

        close(c.quit)

        c.wg.Wait()

        return nil
}

// SubscribeChannelEvents returns an active subscription to the set of channel
// events for the channel watched by this chain watcher. Once clients no longer
// require the subscription, they should call the Cancel() method to allow the
// watcher to regain those committed resources.
func (c *chainWatcher) SubscribeChannelEvents() *ChainEventSubscription {

        c.Lock()
        clientID := c.clientID
        c.clientID++
        c.Unlock()

        log.Debugf("New ChainEventSubscription(id=%v) for ChannelPoint(%v)",
                clientID, c.cfg.chanState.FundingOutpoint)

        sub := &ChainEventSubscription{
                ChanPoint:               c.cfg.chanState.FundingOutpoint,
                RemoteUnilateralClosure: make(chan *RemoteUnilateralCloseInfo, 1),
                LocalUnilateralClosure:  make(chan *LocalUnilateralCloseInfo, 1),
                CooperativeClosure:      make(chan *CooperativeCloseInfo, 1),
                ContractBreach:          make(chan *BreachCloseInfo, 1),
                Cancel: func() {
                        c.Lock()
                        delete(c.clientSubscriptions, clientID)
                        c.Unlock()
                },
        }

        c.Lock()
        c.clientSubscriptions[clientID] = sub
        c.Unlock()

        return sub
}

// handleUnknownLocalState checks whether the passed spend _could_ be a local
// state that for some reason is unknown to us. This could be a state published
// by us before we lost state, which we will try to sweep. Or it could be one
// of our revoked states that somehow made it to the chain. If that's the case
// we cannot really hope that we'll be able to get our money back, but we'll
// try to sweep it anyway. If this is not an unknown local state, false is
// returned.
func (c *chainWatcher) handleUnknownLocalState(
        commitSpend *chainntnfs.SpendDetail, broadcastStateNum uint64,
        chainSet *chainSet) (bool, error) {

        // If the spend was a local commitment, at this point it must either be
        // a past state (we breached!) or a future state (we lost state!). In
        // either case, the only thing we can do is to attempt to sweep what is
        // there.

        // First, we'll re-derive our commitment point for this state since
        // this is what we use to randomize each of the keys for this state.
        commitSecret, err := c.cfg.chanState.RevocationProducer.AtIndex(
                broadcastStateNum,
        )
        if err != nil {
                return false, err
        }
        commitPoint := input.ComputeCommitmentPoint(commitSecret[:])

        // Now that we have the commit point, we'll derive the tweaked local
        // and remote keys for this state. We use our point as only we can
        // revoke our own commitment.
        commitKeyRing := lnwallet.DeriveCommitmentKeys(
                commitPoint, lntypes.Local, c.cfg.chanState.ChanType,
                &c.cfg.chanState.LocalChanCfg, &c.cfg.chanState.RemoteChanCfg,
        )

        auxResult, err := fn.MapOptionZ(
                c.cfg.auxLeafStore,
                //nolint:ll
                func(s lnwallet.AuxLeafStore) fn.Result[lnwallet.CommitDiffAuxResult] {
                        return s.FetchLeavesFromCommit(
                                lnwallet.NewAuxChanState(c.cfg.chanState),
                                c.cfg.chanState.LocalCommitment, *commitKeyRing,
                                lntypes.Local,
                        )
                },
        ).Unpack()
        if err != nil {
                return false, fmt.Errorf("unable to fetch aux leaves: %w", err)
        }

        // With the keys derived, we'll construct the remote script that'll be
        // present if they have a non-dust balance on the commitment.
        var leaseExpiry uint32
        if c.cfg.chanState.ChanType.HasLeaseExpiration() {
                leaseExpiry = c.cfg.chanState.ThawHeight
        }

        remoteAuxLeaf := fn.ChainOption(
                func(l lnwallet.CommitAuxLeaves) input.AuxTapLeaf {
                        return l.RemoteAuxLeaf
                },
        )(auxResult.AuxLeaves)
        remoteScript, _, err := lnwallet.CommitScriptToRemote(
                c.cfg.chanState.ChanType, c.cfg.chanState.IsInitiator,
                commitKeyRing.ToRemoteKey, leaseExpiry,
                remoteAuxLeaf,
        )
        if err != nil {
                return false, err
        }

        // Next, we'll derive our script that includes the revocation base for
        // the remote party allowing them to claim this output before the CSV
        // delay if we breach.
        localAuxLeaf := fn.ChainOption(
                func(l lnwallet.CommitAuxLeaves) input.AuxTapLeaf {
                        return l.LocalAuxLeaf
                },
        )(auxResult.AuxLeaves)
        localScript, err := lnwallet.CommitScriptToSelf(
                c.cfg.chanState.ChanType, c.cfg.chanState.IsInitiator,
                commitKeyRing.ToLocalKey, commitKeyRing.RevocationKey,
                uint32(c.cfg.chanState.LocalChanCfg.CsvDelay), leaseExpiry,
                localAuxLeaf,
        )
        if err != nil {
                return false, err
        }

        // With all our scripts assembled, we'll examine the outputs of the
        // commitment transaction to determine if this is a local force close
        // or not.
        ourCommit := false
        for _, output := range commitSpend.SpendingTx.TxOut {
                pkScript := output.PkScript

                switch {
                case bytes.Equal(localScript.PkScript(), pkScript):
                        ourCommit = true

                case bytes.Equal(remoteScript.PkScript(), pkScript):
                        ourCommit = true
                }
        }

        // If the script is not present, this cannot be our commit.
        if !ourCommit {
                return false, nil
        }

        log.Warnf("Detected local unilateral close of unknown state %v "+
                "(our state=%v)", broadcastStateNum,
                chainSet.localCommit.CommitHeight)

        // If this is our commitment transaction, then we try to act even
        // though we won't be able to sweep HTLCs.
        chainSet.commitSet.ConfCommitKey = fn.Some(LocalHtlcSet)
        if err := c.dispatchLocalForceClose(
                commitSpend, broadcastStateNum, chainSet.commitSet,
        ); err != nil {
                return false, fmt.Errorf("unable to handle local"+
                        "close for chan_point=%v: %v",
                        c.cfg.chanState.FundingOutpoint, err)
        }

        return true, nil
}

// chainSet includes all the information we need to dispatch a channel close
// event to any subscribers.
type chainSet struct {
        // remoteStateNum is the commitment number of the lowest valid
        // commitment the remote party holds from our PoV. This value is used
        // to determine if the remote party is playing a state that's behind,
        // in line, or ahead of the latest state we know for it.
        remoteStateNum uint64

        // commitSet includes information pertaining to the set of active HTLCs
        // on each commitment.
        commitSet CommitSet

        // remoteCommit is the current commitment of the remote party.
        remoteCommit channeldb.ChannelCommitment

        // localCommit is our current commitment.
        localCommit channeldb.ChannelCommitment

        // remotePendingCommit points to the dangling commitment of the remote
        // party, if it exists. If there's no dangling commitment, then this
        // pointer will be nil.
        remotePendingCommit *channeldb.ChannelCommitment
}

// newChainSet creates a new chainSet given the current up to date channel
// state.
func newChainSet(chanState *channeldb.OpenChannel) (*chainSet, error) {
        // First, we'll grab the current unrevoked commitments for ourselves
        // and the remote party.
        localCommit, remoteCommit, err := chanState.LatestCommitments()
        if err != nil {
                return nil, fmt.Errorf("unable to fetch channel state for "+
                        "chan_point=%v", chanState.FundingOutpoint)
        }

        log.Tracef("ChannelPoint(%v): local_commit_type=%v, local_commit=%v",
                chanState.FundingOutpoint, chanState.ChanType,
                spew.Sdump(localCommit))
        log.Tracef("ChannelPoint(%v): remote_commit_type=%v, remote_commit=%v",
                chanState.FundingOutpoint, chanState.ChanType,
                spew.Sdump(remoteCommit))

        // Fetch the current known commit height for the remote party, and
        // their pending commitment chain tip if it exists.
        remoteStateNum := remoteCommit.CommitHeight
        remoteChainTip, err := chanState.RemoteCommitChainTip()
        if err != nil && err != channeldb.ErrNoPendingCommit {
                return nil, fmt.Errorf("unable to obtain chain tip for "+
                        "ChannelPoint(%v): %v",
                        chanState.FundingOutpoint, err)
        }

        // Now that we have all the possible valid commitments, we'll make the
        // CommitSet the ChannelArbitrator will need in order to carry out its
        // duty.
        commitSet := CommitSet{
                HtlcSets: map[HtlcSetKey][]channeldb.HTLC{
                        LocalHtlcSet:  localCommit.Htlcs,
                        RemoteHtlcSet: remoteCommit.Htlcs,
                },
        }

        var remotePendingCommit *channeldb.ChannelCommitment
        if remoteChainTip != nil {
                remotePendingCommit = &remoteChainTip.Commitment
                log.Tracef("ChannelPoint(%v): remote_pending_commit_type=%v, "+
                        "remote_pending_commit=%v", chanState.FundingOutpoint,
                        chanState.ChanType,
                        spew.Sdump(remoteChainTip.Commitment))

                htlcs := remoteChainTip.Commitment.Htlcs
                commitSet.HtlcSets[RemotePendingHtlcSet] = htlcs
        }

        // We'll now retrieve the latest state of the revocation store so we
        // can populate the revocation information within the channel state
        // object that we have.
        //
        // TODO(roasbeef): mutation is bad mkay
        _, err = chanState.RemoteRevocationStore()
        if err != nil {
                return nil, fmt.Errorf("unable to fetch revocation state for "+
                        "chan_point=%v", chanState.FundingOutpoint)
        }

        return &chainSet{
                remoteStateNum:      remoteStateNum,
                commitSet:           commitSet,
                localCommit:         *localCommit,
                remoteCommit:        *remoteCommit,
                remotePendingCommit: remotePendingCommit,
        }, nil
}

// closeObserver is a dedicated goroutine that will watch for any closes of the
// channel that it's watching on chain. In the event of an on-chain event, the
// close observer will assembled the proper materials required to claim the
// funds of the channel on-chain (if required), then dispatch these as
// notifications to all subscribers.
func (c *chainWatcher) closeObserver(spendNtfn *chainntnfs.SpendEvent) {
        defer c.wg.Done()

        log.Infof("Close observer for ChannelPoint(%v) active",
                c.cfg.chanState.FundingOutpoint)

        // If this is a taproot channel, before we proceed, we want to ensure
        // that the expected funding output has confirmed on chain.
        if c.cfg.chanState.ChanType.IsTaproot() {
                fundingPoint := c.cfg.chanState.FundingOutpoint

                confNtfn, err := c.cfg.notifier.RegisterConfirmationsNtfn(
                        &fundingPoint.Hash, c.fundingPkScript, 1, c.heightHint,
                )
                if err != nil {
                        log.Warnf("unable to register for conf: %v", err)
                }

                log.Infof("Waiting for taproot ChannelPoint(%v) to confirm...",
                        c.cfg.chanState.FundingOutpoint)

                select {
                case _, ok := <-confNtfn.Confirmed:
                        // If the channel was closed, then this means that the
                        // notifier exited, so we will as well.
                        if !ok {
                                return
                        }
                case <-c.quit:
                        return
                }
        }

        select {
        // We've detected a spend of the channel onchain! Depending on the type
        // of spend, we'll act accordingly, so we'll examine the spending
        // transaction to determine what we should do.
        //
        // TODO(Roasbeef): need to be able to ensure this only triggers
        // on confirmation, to ensure if multiple txns are broadcast, we
        // act on the one that's timestamped
        case commitSpend, ok := <-spendNtfn.Spend:
                // If the channel was closed, then this means that the notifier
                // exited, so we will as well.
                if !ok {
                        return
                }

                // Otherwise, the remote party might have broadcast a prior
                // revoked state...!!!
                commitTxBroadcast := commitSpend.SpendingTx

                // First, we'll construct the chainset which includes all the
                // data we need to dispatch an event to our subscribers about
                // this possible channel close event.
                chainSet, err := newChainSet(c.cfg.chanState)
                if err != nil {
                        log.Errorf("unable to create commit set: %v", err)
                        return
                }

                // Decode the state hint encoded within the commitment
                // transaction to determine if this is a revoked state or not.
                obfuscator := c.stateHintObfuscator
                broadcastStateNum := c.cfg.extractStateNumHint(
                        commitTxBroadcast, obfuscator,
                )

                // We'll go on to check whether it could be our own commitment
                // that was published and know is confirmed.
                ok, err = c.handleKnownLocalState(
                        commitSpend, broadcastStateNum, chainSet,
                )
                if err != nil {
                        log.Errorf("Unable to handle known local state: %v",
                                err)
                        return
                }

                if ok {
                        return
                }

                // Now that we know it is neither a non-cooperative closure nor
                // a local close with the latest state, we check if it is the
                // remote that closed with any prior or current state.
                ok, err = c.handleKnownRemoteState(
                        commitSpend, broadcastStateNum, chainSet,
                )
                if err != nil {
                        log.Errorf("Unable to handle known remote state: %v",
                                err)
                        return
                }

                if ok {
                        return
                }

                // Next, we'll check to see if this is a cooperative channel
                // closure or not. This is characterized by having an input
                // sequence number that's finalized. This won't happen with
                // regular commitment transactions due to the state hint
                // encoding scheme.
                switch commitTxBroadcast.TxIn[0].Sequence {
                case wire.MaxTxInSequenceNum:
                        fallthrough
                case mempool.MaxRBFSequence:
                        // TODO(roasbeef): rare but possible, need itest case
                        // for
                        err := c.dispatchCooperativeClose(commitSpend)
                        if err != nil {
                                log.Errorf("unable to handle co op close: %v", err)
                        }
                        return
                }

                log.Warnf("Unknown commitment broadcast for "+
                        "ChannelPoint(%v) ", c.cfg.chanState.FundingOutpoint)

                // We'll try to recover as best as possible from losing state.
                // We first check if this was a local unknown state. This could
                // happen if we force close, then lose state or attempt
                // recovery before the commitment confirms.
                ok, err = c.handleUnknownLocalState(
                        commitSpend, broadcastStateNum, chainSet,
                )
                if err != nil {
                        log.Errorf("Unable to handle known local state: %v",
                                err)
                        return
                }

                if ok {
                        return
                }

                // Since it was neither a known remote state, nor a local state
                // that was published, it most likely mean we lost state and
                // the remote node closed. In this case we must start the DLP
                // protocol in hope of getting our money back.
                ok, err = c.handleUnknownRemoteState(
                        commitSpend, broadcastStateNum, chainSet,
                )
                if err != nil {
                        log.Errorf("Unable to handle unknown remote state: %v",
                                err)
                        return
                }

                if ok {
                        return
                }

                log.Warnf("Unable to handle spending tx %v of channel point %v",
                        commitTxBroadcast.TxHash(), c.cfg.chanState.FundingOutpoint)
                return

        // The chainWatcher has been signalled to exit, so we'll do so now.
        case <-c.quit:
                return
        }
}

// handleKnownLocalState checks whether the passed spend is a local state that
// is known to us (the current state). If so we will act on this state using
// the passed chainSet. If this is not a known local state, false is returned.
func (c *chainWatcher) handleKnownLocalState(
        commitSpend *chainntnfs.SpendDetail, broadcastStateNum uint64,
        chainSet *chainSet) (bool, error) {

        // If the channel is recovered, we won't have a local commit to check
        // against, so immediately return.
        if c.cfg.chanState.HasChanStatus(channeldb.ChanStatusRestored) {
                return false, nil
        }

        commitTxBroadcast := commitSpend.SpendingTx
        commitHash := commitTxBroadcast.TxHash()

        // Check whether our latest local state hit the chain.
        if chainSet.localCommit.CommitTx.TxHash() != commitHash {
                return false, nil
        }

        chainSet.commitSet.ConfCommitKey = fn.Some(LocalHtlcSet)
        if err := c.dispatchLocalForceClose(
                commitSpend, broadcastStateNum, chainSet.commitSet,
        ); err != nil {
                return false, fmt.Errorf("unable to handle local"+
                        "close for chan_point=%v: %v",
                        c.cfg.chanState.FundingOutpoint, err)
        }

        return true, nil
}

// handleKnownRemoteState checks whether the passed spend is a remote state
// that is known to us (a revoked, current or pending state). If so we will act
// on this state using the passed chainSet. If this is not a known remote
// state, false is returned.
func (c *chainWatcher) handleKnownRemoteState(
        commitSpend *chainntnfs.SpendDetail, broadcastStateNum uint64,
        chainSet *chainSet) (bool, error) {

        // If the channel is recovered, we won't have any remote commit to
        // check against, so imemdiately return.
        if c.cfg.chanState.HasChanStatus(channeldb.ChanStatusRestored) {
                return false, nil
        }

        commitTxBroadcast := commitSpend.SpendingTx
        commitHash := commitTxBroadcast.TxHash()

        switch {
        // If the spending transaction matches the current latest state, then
        // they've initiated a unilateral close. So we'll trigger the
        // unilateral close signal so subscribers can clean up the state as
        // necessary.
        case chainSet.remoteCommit.CommitTx.TxHash() == commitHash:
                log.Infof("Remote party broadcast base set, "+
                        "commit_num=%v", chainSet.remoteStateNum)

                chainSet.commitSet.ConfCommitKey = fn.Some(RemoteHtlcSet)
                err := c.dispatchRemoteForceClose(
                        commitSpend, chainSet.remoteCommit,
                        chainSet.commitSet,
                        c.cfg.chanState.RemoteCurrentRevocation,
                )
                if err != nil {
                        return false, fmt.Errorf("unable to handle remote "+
                                "close for chan_point=%v: %v",
                                c.cfg.chanState.FundingOutpoint, err)
                }

                return true, nil

        // We'll also handle the case of the remote party broadcasting
        // their commitment transaction which is one height above ours.
        // This case can arise when we initiate a state transition, but
        // the remote party has a fail crash _after_ accepting the new
        // state, but _before_ sending their signature to us.
        case chainSet.remotePendingCommit != nil &&
                chainSet.remotePendingCommit.CommitTx.TxHash() == commitHash:

                log.Infof("Remote party broadcast pending set, "+
                        "commit_num=%v", chainSet.remoteStateNum+1)

                chainSet.commitSet.ConfCommitKey = fn.Some(RemotePendingHtlcSet)
                err := c.dispatchRemoteForceClose(
                        commitSpend, *chainSet.remotePendingCommit,
                        chainSet.commitSet,
                        c.cfg.chanState.RemoteNextRevocation,
                )
                if err != nil {
                        return false, fmt.Errorf("unable to handle remote "+
                                "close for chan_point=%v: %v",
                                c.cfg.chanState.FundingOutpoint, err)
                }

                return true, nil
        }

        // This is neither a remote force close or a "future" commitment, we
        // now check whether it's a remote breach and properly handle it.
        return c.handlePossibleBreach(commitSpend, broadcastStateNum, chainSet)
}

// handlePossibleBreach checks whether the remote has breached and dispatches a
// breach resolution to claim funds.
func (c *chainWatcher) handlePossibleBreach(commitSpend *chainntnfs.SpendDetail,
        broadcastStateNum uint64, chainSet *chainSet) (bool, error) {

        // We check if we have a revoked state at this state num that matches
        // the spend transaction.
        spendHeight := uint32(commitSpend.SpendingHeight)
        retribution, err := lnwallet.NewBreachRetribution(
                c.cfg.chanState, broadcastStateNum, spendHeight,
                commitSpend.SpendingTx, c.cfg.auxLeafStore, c.cfg.auxResolver,
        )

        switch {
        // If we had no log entry at this height, this was not a revoked state.
        case err == channeldb.ErrLogEntryNotFound:
                return false, nil
        case err == channeldb.ErrNoPastDeltas:
                return false, nil

        case err != nil:
                return false, fmt.Errorf("unable to create breach "+
                        "retribution: %v", err)
        }

        // We found a revoked state at this height, but it could still be our
        // own broadcasted state we are looking at. Therefore check that the
        // commit matches before assuming it was a breach.
        commitHash := commitSpend.SpendingTx.TxHash()
        if retribution.BreachTxHash != commitHash {
                return false, nil
        }

        // Create an AnchorResolution for the breached state.
        anchorRes, err := lnwallet.NewAnchorResolution(
                c.cfg.chanState, commitSpend.SpendingTx, retribution.KeyRing,
                lntypes.Remote,
        )
        if err != nil {
                return false, fmt.Errorf("unable to create anchor "+
                        "resolution: %v", err)
        }

        // We'll set the ConfCommitKey here as the remote htlc set. This is
        // only used to ensure a nil-pointer-dereference doesn't occur and is
        // not used otherwise. The HTLC's may not exist for the
        // RemotePendingHtlcSet.
        chainSet.commitSet.ConfCommitKey = fn.Some(RemoteHtlcSet)

        // THEY'RE ATTEMPTING TO VIOLATE THE CONTRACT LAID OUT WITHIN THE
        // PAYMENT CHANNEL. Therefore we close the signal indicating a revoked
        // broadcast to allow subscribers to swiftly dispatch justice!!!
        err = c.dispatchContractBreach(
                commitSpend, chainSet, broadcastStateNum, retribution,
                anchorRes,
        )
        if err != nil {
                return false, fmt.Errorf("unable to handle channel "+
                        "breach for chan_point=%v: %v",
                        c.cfg.chanState.FundingOutpoint, err)
        }

        return true, nil
}

// handleUnknownRemoteState is the last attempt we make at reclaiming funds
// from the closed channel, by checkin whether the passed spend _could_ be a
// remote spend that is unknown to us (we lost state). We will try to initiate
// Data Loss Protection in order to restore our commit point and reclaim our
// funds from the channel. If we are not able to act on it, false is returned.
func (c *chainWatcher) handleUnknownRemoteState(
        commitSpend *chainntnfs.SpendDetail, broadcastStateNum uint64,
        chainSet *chainSet) (bool, error) {

        log.Warnf("Remote node broadcast state #%v, "+
                "which is more than 1 beyond best known "+
                "state #%v!!! Attempting recovery...",
                broadcastStateNum, chainSet.remoteStateNum)

        // If this isn't a tweakless commitment, then we'll need to wait for
        // the remote party's latest unrevoked commitment point to be presented
        // to us as we need this to sweep. Otherwise, we can dispatch the
        // remote close and sweep immediately using a fake commitPoint as it
        // isn't actually needed for recovery anymore.
        commitPoint := c.cfg.chanState.RemoteCurrentRevocation
        tweaklessCommit := c.cfg.chanState.ChanType.IsTweakless()
        if !tweaklessCommit {
                commitPoint = c.waitForCommitmentPoint()
                if commitPoint == nil {
                        return false, fmt.Errorf("unable to get commit point")
                }

                log.Infof("Recovered commit point(%x) for "+
                        "channel(%v)! Now attempting to use it to "+
                        "sweep our funds...",
                        commitPoint.SerializeCompressed(),
                        c.cfg.chanState.FundingOutpoint)
        } else {
                log.Infof("ChannelPoint(%v) is tweakless, "+
                        "moving to sweep directly on chain",
                        c.cfg.chanState.FundingOutpoint)
        }

        // Since we don't have the commitment stored for this state, we'll just
        // pass an empty commitment within the commitment set. Note that this
        // means we won't be able to recover any HTLC funds.
        //
        // TODO(halseth): can we try to recover some HTLCs?
        chainSet.commitSet.ConfCommitKey = fn.Some(RemoteHtlcSet)
        err := c.dispatchRemoteForceClose(
                commitSpend, channeldb.ChannelCommitment{},
                chainSet.commitSet, commitPoint,
        )
        if err != nil {
                return false, fmt.Errorf("unable to handle remote "+
                        "close for chan_point=%v: %v",
                        c.cfg.chanState.FundingOutpoint, err)
        }

        return true, nil
}

// toSelfAmount takes a transaction and returns the sum of all outputs that pay
// to a script that the wallet controls or the channel defines as its delivery
// script . If no outputs pay to us (determined by these criteria), then we
// return zero. This is possible as our output may have been trimmed due to
// being dust.
func (c *chainWatcher) toSelfAmount(tx *wire.MsgTx) btcutil.Amount {
        // There are two main cases we have to handle here. First, in the coop
        // close case we will always have saved the delivery address we used
        // whether it was from the upfront shutdown, from the delivery address
        // requested at close time, or even an automatically generated one. All
        // coop-close cases can be identified in the following manner:
        shutdown, _ := c.cfg.chanState.ShutdownInfo()
        oDeliveryAddr := fn.MapOption(
                func(i channeldb.ShutdownInfo) lnwire.DeliveryAddress {
                        return i.DeliveryScript.Val
                })(shutdown)

        // Here we define a function capable of identifying whether an output
        // corresponds with our local delivery script from a ShutdownInfo if we
        // have a ShutdownInfo for this chainWatcher's underlying channel.
        //
        // isDeliveryOutput :: *TxOut -> bool
        isDeliveryOutput := func(o *wire.TxOut) bool {
                return fn.ElimOption(
                        oDeliveryAddr,
                        // If we don't have a delivery addr, then the output
                        // can't match it.
                        func() bool { return false },
                        // Otherwise if the PkScript of the TxOut matches our
                        // delivery script then this is a delivery output.
                        func(a lnwire.DeliveryAddress) bool {
                                return slices.Equal(a, o.PkScript)
                        },
                )
        }

        // Here we define a function capable of identifying whether an output
        // belongs to the LND wallet. We use this as a heuristic in the case
        // where we might be looking for spendable force closure outputs.
        //
        // isWalletOutput :: *TxOut -> bool
        isWalletOutput := func(out *wire.TxOut) bool {
                _, addrs, _, err := txscript.ExtractPkScriptAddrs(
                        // Doesn't matter what net we actually pass in.
                        out.PkScript, &chaincfg.TestNet3Params,
                )
                if err != nil {
                        return false
                }

                return fn.Any(c.cfg.isOurAddr, addrs)
        }

        // Grab all of the outputs that correspond with our delivery address
        // or our wallet is aware of.
        outs := fn.Filter(fn.PredOr(isDeliveryOutput, isWalletOutput), tx.TxOut)

        // Grab the values for those outputs.
        vals := fn.Map(func(o *wire.TxOut) int64 { return o.Value }, outs)

        // Return the sum.
        return btcutil.Amount(fn.Sum(vals))
}

// dispatchCooperativeClose processed a detect cooperative channel closure.
// We'll use the spending transaction to locate our output within the
// transaction, then clean up the database state. We'll also dispatch a
// notification to all subscribers that the channel has been closed in this
// manner.
func (c *chainWatcher) dispatchCooperativeClose(commitSpend *chainntnfs.SpendDetail) error {
        broadcastTx := commitSpend.SpendingTx

        log.Infof("Cooperative closure for ChannelPoint(%v): %v",
                c.cfg.chanState.FundingOutpoint, spew.Sdump(broadcastTx))

        // If the input *is* final, then we'll check to see which output is
        // ours.
        localAmt := c.toSelfAmount(broadcastTx)

        // Once this is known, we'll mark the state as fully closed in the
        // database. We can do this as a cooperatively closed channel has all
        // its outputs resolved after only one confirmation.
        closeSummary := &channeldb.ChannelCloseSummary{
                ChanPoint:               c.cfg.chanState.FundingOutpoint,
                ChainHash:               c.cfg.chanState.ChainHash,
                ClosingTXID:             *commitSpend.SpenderTxHash,
                RemotePub:               c.cfg.chanState.IdentityPub,
                Capacity:                c.cfg.chanState.Capacity,
                CloseHeight:             uint32(commitSpend.SpendingHeight),
                SettledBalance:          localAmt,
                CloseType:               channeldb.CooperativeClose,
                ShortChanID:             c.cfg.chanState.ShortChanID(),
                IsPending:               true,
                RemoteCurrentRevocation: c.cfg.chanState.RemoteCurrentRevocation,
                RemoteNextRevocation:    c.cfg.chanState.RemoteNextRevocation,
                LocalChanConfig:         c.cfg.chanState.LocalChanCfg,
        }

        // Attempt to add a channel sync message to the close summary.
        chanSync, err := c.cfg.chanState.ChanSyncMsg()
        if err != nil {
                log.Errorf("ChannelPoint(%v): unable to create channel sync "+
                        "message: %v", c.cfg.chanState.FundingOutpoint, err)
        } else {
                closeSummary.LastChanSyncMsg = chanSync
        }

        // Create a summary of all the information needed to handle the
        // cooperative closure.
        closeInfo := &CooperativeCloseInfo{
                ChannelCloseSummary: closeSummary,
        }

        // With the event processed, we'll now notify all subscribers of the
        // event.
        c.Lock()
        for _, sub := range c.clientSubscriptions {
                select {
                case sub.CooperativeClosure <- closeInfo:
                case <-c.quit:
                        c.Unlock()
                        return fmt.Errorf("exiting")
                }
        }
        c.Unlock()

        return nil
}

// dispatchLocalForceClose processes a unilateral close by us being confirmed.
func (c *chainWatcher) dispatchLocalForceClose(
        commitSpend *chainntnfs.SpendDetail,
        stateNum uint64, commitSet CommitSet) error {

        log.Infof("Local unilateral close of ChannelPoint(%v) "+
                "detected", c.cfg.chanState.FundingOutpoint)

        forceClose, err := lnwallet.NewLocalForceCloseSummary(
                c.cfg.chanState, c.cfg.signer, commitSpend.SpendingTx, stateNum,
                c.cfg.auxLeafStore, c.cfg.auxResolver,
        )
        if err != nil {
                return err
        }

        // As we've detected that the channel has been closed, immediately
        // creating a close summary for future usage by related sub-systems.
        chanSnapshot := forceClose.ChanSnapshot
        closeSummary := &channeldb.ChannelCloseSummary{
                ChanPoint:               chanSnapshot.ChannelPoint,
                ChainHash:               chanSnapshot.ChainHash,
                ClosingTXID:             forceClose.CloseTx.TxHash(),
                RemotePub:               &chanSnapshot.RemoteIdentity,
                Capacity:                chanSnapshot.Capacity,
                CloseType:               channeldb.LocalForceClose,
                IsPending:               true,
                ShortChanID:             c.cfg.chanState.ShortChanID(),
                CloseHeight:             uint32(commitSpend.SpendingHeight),
                RemoteCurrentRevocation: c.cfg.chanState.RemoteCurrentRevocation,
                RemoteNextRevocation:    c.cfg.chanState.RemoteNextRevocation,
                LocalChanConfig:         c.cfg.chanState.LocalChanCfg,
        }

        resolutions, err := forceClose.ContractResolutions.UnwrapOrErr(
                fmt.Errorf("resolutions not found"),
        )
        if err != nil {
                return err
        }

        // If our commitment output isn't dust or we have active HTLC's on the
        // commitment transaction, then we'll populate the balances on the
        // close channel summary.
        if resolutions.CommitResolution != nil {
                localBalance := chanSnapshot.LocalBalance.ToSatoshis()
                closeSummary.SettledBalance = localBalance
                closeSummary.TimeLockedBalance = localBalance
        }

        if resolutions.HtlcResolutions != nil {
                for _, htlc := range resolutions.HtlcResolutions.OutgoingHTLCs {
                        htlcValue := btcutil.Amount(
                                htlc.SweepSignDesc.Output.Value,
                        )
                        closeSummary.TimeLockedBalance += htlcValue
                }
        }

        // Attempt to add a channel sync message to the close summary.
        chanSync, err := c.cfg.chanState.ChanSyncMsg()
        if err != nil {
                log.Errorf("ChannelPoint(%v): unable to create channel sync "+
                        "message: %v", c.cfg.chanState.FundingOutpoint, err)
        } else {
                closeSummary.LastChanSyncMsg = chanSync
        }

        // With the event processed, we'll now notify all subscribers of the
        // event.
        closeInfo := &LocalUnilateralCloseInfo{
                SpendDetail:            commitSpend,
                LocalForceCloseSummary: forceClose,
                ChannelCloseSummary:    closeSummary,
                CommitSet:              commitSet,
        }
        c.Lock()
        for _, sub := range c.clientSubscriptions {
                select {
                case sub.LocalUnilateralClosure <- closeInfo:
                case <-c.quit:
                        c.Unlock()
                        return fmt.Errorf("exiting")
                }
        }
        c.Unlock()

        return nil
}

// dispatchRemoteForceClose processes a detected unilateral channel closure by
// the remote party. This function will prepare a UnilateralCloseSummary which
// will then be sent to any subscribers allowing them to resolve all our funds
// in the channel on chain. Once this close summary is prepared, all registered
// subscribers will receive a notification of this event. The commitPoint
// argument should be set to the per_commitment_point corresponding to the
// spending commitment.
//
// NOTE: The remoteCommit argument should be set to the stored commitment for
// this particular state. If we don't have the commitment stored (should only
// happen in case we have lost state) it should be set to an empty struct, in
// which case we will attempt to sweep the non-HTLC output using the passed
// commitPoint.
func (c *chainWatcher) dispatchRemoteForceClose(
        commitSpend *chainntnfs.SpendDetail,
        remoteCommit channeldb.ChannelCommitment,
        commitSet CommitSet, commitPoint *btcec.PublicKey) error {

        log.Infof("Unilateral close of ChannelPoint(%v) "+
                "detected", c.cfg.chanState.FundingOutpoint)

        // First, we'll create a closure summary that contains all the
        // materials required to let each subscriber sweep the funds in the
        // channel on-chain.
        uniClose, err := lnwallet.NewUnilateralCloseSummary(
                c.cfg.chanState, c.cfg.signer, commitSpend, remoteCommit,
                commitPoint, c.cfg.auxLeafStore, c.cfg.auxResolver,
        )
        if err != nil {
                return err
        }

        // With the event processed, we'll now notify all subscribers of the
        // event.
        c.Lock()
        for _, sub := range c.clientSubscriptions {
                select {
                case sub.RemoteUnilateralClosure <- &RemoteUnilateralCloseInfo{
                        UnilateralCloseSummary: uniClose,
                        CommitSet:              commitSet,
                }:
                case <-c.quit:
                        c.Unlock()
                        return fmt.Errorf("exiting")
                }
        }
        c.Unlock()

        return nil
}

// dispatchContractBreach processes a detected contract breached by the remote
// party. This method is to be called once we detect that the remote party has
// broadcast a prior revoked commitment state. This method well prepare all the
// materials required to bring the cheater to justice, then notify all
// registered subscribers of this event.
func (c *chainWatcher) dispatchContractBreach(spendEvent *chainntnfs.SpendDetail,
        chainSet *chainSet, broadcastStateNum uint64,
        retribution *lnwallet.BreachRetribution,
        anchorRes *lnwallet.AnchorResolution) error {

        log.Warnf("Remote peer has breached the channel contract for "+
                "ChannelPoint(%v). Revoked state #%v was broadcast!!!",
                c.cfg.chanState.FundingOutpoint, broadcastStateNum)

        if err := c.cfg.chanState.MarkBorked(); err != nil {
                return fmt.Errorf("unable to mark channel as borked: %w", err)
        }

        spendHeight := uint32(spendEvent.SpendingHeight)

        log.Debugf("Punishment breach retribution created: %v",
                lnutils.NewLogClosure(func() string {
                        retribution.KeyRing.LocalHtlcKey = nil
                        retribution.KeyRing.RemoteHtlcKey = nil
                        retribution.KeyRing.ToLocalKey = nil
                        retribution.KeyRing.ToRemoteKey = nil
                        retribution.KeyRing.RevocationKey = nil
                        return spew.Sdump(retribution)
                }))

        settledBalance := chainSet.remoteCommit.LocalBalance.ToSatoshis()
        closeSummary := channeldb.ChannelCloseSummary{
                ChanPoint:               c.cfg.chanState.FundingOutpoint,
                ChainHash:               c.cfg.chanState.ChainHash,
                ClosingTXID:             *spendEvent.SpenderTxHash,
                CloseHeight:             spendHeight,
                RemotePub:               c.cfg.chanState.IdentityPub,
                Capacity:                c.cfg.chanState.Capacity,
                SettledBalance:          settledBalance,
                CloseType:               channeldb.BreachClose,
                IsPending:               true,
                ShortChanID:             c.cfg.chanState.ShortChanID(),
                RemoteCurrentRevocation: c.cfg.chanState.RemoteCurrentRevocation,
                RemoteNextRevocation:    c.cfg.chanState.RemoteNextRevocation,
                LocalChanConfig:         c.cfg.chanState.LocalChanCfg,
        }

        // Attempt to add a channel sync message to the close summary.
        chanSync, err := c.cfg.chanState.ChanSyncMsg()
        if err != nil {
                log.Errorf("ChannelPoint(%v): unable to create channel sync "+
                        "message: %v", c.cfg.chanState.FundingOutpoint, err)
        } else {
                closeSummary.LastChanSyncMsg = chanSync
        }

        // Hand the retribution info over to the BreachArbitrator. This function
        // will wait for a response from the breach arbiter and then proceed to
        // send a BreachCloseInfo to the channel arbitrator. The channel arb
        // will then mark the channel as closed after resolutions and the
        // commit set are logged in the arbitrator log.
        if err := c.cfg.contractBreach(retribution); err != nil {
                log.Errorf("unable to hand breached contract off to "+
                        "BreachArbitrator: %v", err)
                return err
        }

        breachRes := &BreachResolution{
                FundingOutPoint: c.cfg.chanState.FundingOutpoint,
        }

        breachInfo := &BreachCloseInfo{
                CommitHash:       spendEvent.SpendingTx.TxHash(),
                BreachResolution: breachRes,
                AnchorResolution: anchorRes,
                CommitSet:        chainSet.commitSet,
                CloseSummary:     closeSummary,
        }

        // With the event processed and channel closed, we'll now notify all
        // subscribers of the event.
        c.Lock()
        for _, sub := range c.clientSubscriptions {
                select {
                case sub.ContractBreach <- breachInfo:
                case <-c.quit:
                        c.Unlock()
                        return fmt.Errorf("quitting")
                }
        }
        c.Unlock()

        return nil
}

// waitForCommitmentPoint waits for the commitment point to be inserted into
// the local database. We'll use this method in the DLP case, to wait for the
// remote party to send us their point, as we can't proceed until we have that.
func (c *chainWatcher) waitForCommitmentPoint() *btcec.PublicKey {
        // If we are lucky, the remote peer sent us the correct commitment
        // point during channel sync, such that we can sweep our funds. If we
        // cannot find the commit point, there's not much we can do other than
        // wait for us to retrieve it. We will attempt to retrieve it from the
        // peer each time we connect to it.
        //
        // TODO(halseth): actively initiate re-connection to the peer?
        backoff := minCommitPointPollTimeout
        for {
                commitPoint, err := c.cfg.chanState.DataLossCommitPoint()
                if err == nil {
                        return commitPoint
                }

                log.Errorf("Unable to retrieve commitment point for "+
                        "channel(%v) with lost state: %v. Retrying in %v.",
                        c.cfg.chanState.FundingOutpoint, err, backoff)

                select {
                // Wait before retrying, with an exponential backoff.
                case <-time.After(backoff):
                        backoff = 2 * backoff
                        if backoff > maxCommitPointPollTimeout {
                                backoff = maxCommitPointPollTimeout
                        }

                case <-c.quit:
                        return nil
                }
        }
}

lightningnetwork / lnd / 12199391122

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous