13481890706

Committed 23 Feb 2025 09:53AM UTC coverage: 46.221% (-12.6%) from 58.825%

Build # 13481890706

Build Type

Pull #9521

github

Committed by

web-flow

Commit Message

Merge 9fb980a6f into 5fe900d18

Pull Request Pull Request #9521: unit: remove GOACC, use Go 1.20 native coverage functionality

Run Details

105094 of 227374 relevant lines covered (46.22%)

19705.84 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

9.93

/lnrpc/routerrpc/router_server.go

package routerrpc

import (
        "bytes"
        "context"
        crand "crypto/rand"
        "errors"
        "fmt"
        "os"
        "path/filepath"
        "sync/atomic"
        "time"

        "github.com/btcsuite/btcd/btcutil"
        "github.com/btcsuite/btcd/wire"
        "github.com/grpc-ecosystem/grpc-gateway/v2/runtime"
        "github.com/lightningnetwork/lnd/aliasmgr"
        "github.com/lightningnetwork/lnd/channeldb"
        "github.com/lightningnetwork/lnd/fn/v2"
        "github.com/lightningnetwork/lnd/lnrpc"
        "github.com/lightningnetwork/lnd/lnrpc/invoicesrpc"
        "github.com/lightningnetwork/lnd/lntypes"
        "github.com/lightningnetwork/lnd/lnwire"
        "github.com/lightningnetwork/lnd/macaroons"
        "github.com/lightningnetwork/lnd/routing"
        "github.com/lightningnetwork/lnd/routing/route"
        "github.com/lightningnetwork/lnd/zpay32"
        "google.golang.org/grpc"
        "google.golang.org/grpc/codes"
        "google.golang.org/grpc/status"
        "gopkg.in/macaroon-bakery.v2/bakery"
)

const (
        // subServerName is the name of the sub rpc server. We'll use this name
        // to register ourselves, and we also require that the main
        // SubServerConfigDispatcher instance recognize as the name of our
        subServerName = "RouterRPC"

        // routeFeeLimitSat is the maximum routing fee that we allow to occur
        // when estimating a routing fee.
        routeFeeLimitSat = 100_000_000

        // DefaultPaymentTimeout is the default value of time we should spend
        // when attempting to fulfill the payment.
        DefaultPaymentTimeout int32 = 60
)

var (
        errServerShuttingDown = errors.New("routerrpc server shutting down")

        // ErrInterceptorAlreadyExists is an error returned when a new stream is
        // opened and there is already one active interceptor. The user must
        // disconnect prior to open another stream.
        ErrInterceptorAlreadyExists = errors.New("interceptor already exists")

        errMissingPaymentAttempt = errors.New("missing payment attempt")

        errMissingRoute = errors.New("missing route")

        errUnexpectedFailureSource = errors.New("unexpected failure source")

        // ErrAliasAlreadyExists is returned if a new SCID alias is attempted
        // to be added that already exists.
        ErrAliasAlreadyExists = errors.New("alias already exists")

        // ErrNoValidAlias is returned if an alias is not in the valid range for
        // allowed SCID aliases.
        ErrNoValidAlias = errors.New("not a valid alias")

        // macaroonOps are the set of capabilities that our minted macaroon (if
        // it doesn't already exist) will have.
        macaroonOps = []bakery.Op{
                {
                        Entity: "offchain",
                        Action: "read",
                },
                {
                        Entity: "offchain",
                        Action: "write",
                },
        }

        // macPermissions maps RPC calls to the permissions they require.
        macPermissions = map[string][]bakery.Op{
                "/routerrpc.Router/SendPaymentV2": {{
                        Entity: "offchain",
                        Action: "write",
                }},
                "/routerrpc.Router/SendToRouteV2": {{
                        Entity: "offchain",
                        Action: "write",
                }},
                "/routerrpc.Router/SendToRoute": {{
                        Entity: "offchain",
                        Action: "write",
                }},
                "/routerrpc.Router/TrackPaymentV2": {{
                        Entity: "offchain",
                        Action: "read",
                }},
                "/routerrpc.Router/TrackPayments": {{
                        Entity: "offchain",
                        Action: "read",
                }},
                "/routerrpc.Router/EstimateRouteFee": {{
                        Entity: "offchain",
                        Action: "read",
                }},
                "/routerrpc.Router/QueryMissionControl": {{
                        Entity: "offchain",
                        Action: "read",
                }},
                "/routerrpc.Router/XImportMissionControl": {{
                        Entity: "offchain",
                        Action: "write",
                }},
                "/routerrpc.Router/GetMissionControlConfig": {{
                        Entity: "offchain",
                        Action: "read",
                }},
                "/routerrpc.Router/SetMissionControlConfig": {{
                        Entity: "offchain",
                        Action: "write",
                }},
                "/routerrpc.Router/QueryProbability": {{
                        Entity: "offchain",
                        Action: "read",
                }},
                "/routerrpc.Router/ResetMissionControl": {{
                        Entity: "offchain",
                        Action: "write",
                }},
                "/routerrpc.Router/BuildRoute": {{
                        Entity: "offchain",
                        Action: "read",
                }},
                "/routerrpc.Router/SubscribeHtlcEvents": {{
                        Entity: "offchain",
                        Action: "read",
                }},
                "/routerrpc.Router/SendPayment": {{
                        Entity: "offchain",
                        Action: "write",
                }},
                "/routerrpc.Router/TrackPayment": {{
                        Entity: "offchain",
                        Action: "read",
                }},
                "/routerrpc.Router/HtlcInterceptor": {{
                        Entity: "offchain",
                        Action: "write",
                }},
                "/routerrpc.Router/UpdateChanStatus": {{
                        Entity: "offchain",
                        Action: "write",
                }},
                "/routerrpc.Router/XAddLocalChanAliases": {{
                        Entity: "offchain",
                        Action: "write",
                }},
                "/routerrpc.Router/XDeleteLocalChanAliases": {{
                        Entity: "offchain",
                        Action: "write",
                }},
        }

        // DefaultRouterMacFilename is the default name of the router macaroon
        // that we expect to find via a file handle within the main
        // configuration file in this package.
        DefaultRouterMacFilename = "router.macaroon"
)

// ServerShell is a shell struct holding a reference to the actual sub-server.
// It is used to register the gRPC sub-server with the root server before we
// have the necessary dependencies to populate the actual sub-server.
type ServerShell struct {
        RouterServer
}

// Server is a stand-alone sub RPC server which exposes functionality that
// allows clients to route arbitrary payment through the Lightning Network.
type Server struct {
        started                  int32 // To be used atomically.
        shutdown                 int32 // To be used atomically.
        forwardInterceptorActive int32 // To be used atomically.

        // Required by the grpc-gateway/v2 library for forward compatibility.
        // Must be after the atomically used variables to not break struct
        // alignment.
        UnimplementedRouterServer

        cfg *Config

        quit chan struct{}
}

// A compile time check to ensure that Server fully implements the RouterServer
// gRPC service.
var _ RouterServer = (*Server)(nil)

// New creates a new instance of the RouterServer given a configuration struct
// that contains all external dependencies. If the target macaroon exists, and
// we're unable to create it, then an error will be returned. We also return
// the set of permissions that we require as a server. At the time of writing
// of this documentation, this is the same macaroon as the admin macaroon.
func New(cfg *Config) (*Server, lnrpc.MacaroonPerms, error) {
        // If the path of the router macaroon wasn't generated, then we'll
        // assume that it's found at the default network directory.
        if cfg.RouterMacPath == "" {
                cfg.RouterMacPath = filepath.Join(
                        cfg.NetworkDir, DefaultRouterMacFilename,
                )
        }

        // Now that we know the full path of the router macaroon, we can check
        // to see if we need to create it or not. If stateless_init is set
        // then we don't write the macaroons.
        macFilePath := cfg.RouterMacPath
        if cfg.MacService != nil && !cfg.MacService.StatelessInit &&
                !lnrpc.FileExists(macFilePath) {

                log.Infof("Making macaroons for Router RPC Server at: %v",
                        macFilePath)

                // At this point, we know that the router macaroon doesn't yet,
                // exist, so we need to create it with the help of the main
                // macaroon service.
                routerMac, err := cfg.MacService.NewMacaroon(
                        context.Background(), macaroons.DefaultRootKeyID,
                        macaroonOps...,
                )
                if err != nil {
                        return nil, nil, err
                }
                routerMacBytes, err := routerMac.M().MarshalBinary()
                if err != nil {
                        return nil, nil, err
                }
                err = os.WriteFile(macFilePath, routerMacBytes, 0644)
                if err != nil {
                        _ = os.Remove(macFilePath)
                        return nil, nil, err
                }
        }

        routerServer := &Server{
                cfg:  cfg,
                quit: make(chan struct{}),
        }

        return routerServer, macPermissions, nil
}

// Start launches any helper goroutines required for the rpcServer to function.
//
// NOTE: This is part of the lnrpc.SubServer interface.
func (s *Server) Start() error {
        if atomic.AddInt32(&s.started, 1) != 1 {
                return nil
        }

        return nil
}

// Stop signals any active goroutines for a graceful closure.
//
// NOTE: This is part of the lnrpc.SubServer interface.
func (s *Server) Stop() error {
        if atomic.AddInt32(&s.shutdown, 1) != 1 {
                return nil
        }

        close(s.quit)
        return nil
}

// Name returns a unique string representation of the sub-server. This can be
// used to identify the sub-server and also de-duplicate them.
//
// NOTE: This is part of the lnrpc.SubServer interface.
func (s *Server) Name() string {
        return subServerName
}

// RegisterWithRootServer will be called by the root gRPC server to direct a
// sub RPC server to register itself with the main gRPC root server. Until this
// is called, each sub-server won't be able to have requests routed towards it.
//
// NOTE: This is part of the lnrpc.GrpcHandler interface.
func (r *ServerShell) RegisterWithRootServer(grpcServer *grpc.Server) error {
        // We make sure that we register it with the main gRPC server to ensure
        // all our methods are routed properly.
        RegisterRouterServer(grpcServer, r)

        log.Debugf("Router RPC server successfully registered with root gRPC " +
                "server")

        return nil
}

// RegisterWithRestServer will be called by the root REST mux to direct a sub
// RPC server to register itself with the main REST mux server. Until this is
// called, each sub-server won't be able to have requests routed towards it.
//
// NOTE: This is part of the lnrpc.GrpcHandler interface.
func (r *ServerShell) RegisterWithRestServer(ctx context.Context,
        mux *runtime.ServeMux, dest string, opts []grpc.DialOption) error {

        // We make sure that we register it with the main REST server to ensure
        // all our methods are routed properly.
        err := RegisterRouterHandlerFromEndpoint(ctx, mux, dest, opts)
        if err != nil {
                log.Errorf("Could not register Router REST server "+
                        "with root REST server: %v", err)
                return err
        }

        log.Debugf("Router REST server successfully registered with " +
                "root REST server")
        return nil
}

// CreateSubServer populates the subserver's dependencies using the passed
// SubServerConfigDispatcher. This method should fully initialize the
// sub-server instance, making it ready for action. It returns the macaroon
// permissions that the sub-server wishes to pass on to the root server for all
// methods routed towards it.
//
// NOTE: This is part of the lnrpc.GrpcHandler interface.
func (r *ServerShell) CreateSubServer(configRegistry lnrpc.SubServerConfigDispatcher) (
        lnrpc.SubServer, lnrpc.MacaroonPerms, error) {

        subServer, macPermissions, err := createNewSubServer(configRegistry)
        if err != nil {
                return nil, nil, err
        }

        r.RouterServer = subServer
        return subServer, macPermissions, nil
}

// SendPaymentV2 attempts to route a payment described by the passed
// PaymentRequest to the final destination. If we are unable to route the
// payment, or cannot find a route that satisfies the constraints in the
// PaymentRequest, then an error will be returned. Otherwise, the payment
// pre-image, along with the final route will be returned.
func (s *Server) SendPaymentV2(req *SendPaymentRequest,
        stream Router_SendPaymentV2Server) error {

        // Set payment request attempt timeout.
        if req.TimeoutSeconds == 0 {
                req.TimeoutSeconds = DefaultPaymentTimeout
        }

        payment, err := s.cfg.RouterBackend.extractIntentFromSendRequest(req)
        if err != nil {
                return err
        }

        // Get the payment hash.
        payHash := payment.Identifier()

        // Init the payment in db.
        paySession, shardTracker, err := s.cfg.Router.PreparePayment(payment)
        if err != nil {
                log.Errorf("SendPayment async error for payment %x: %v",
                        payment.Identifier(), err)

                // Transform user errors to grpc code.
                if errors.Is(err, channeldb.ErrPaymentExists) ||
                        errors.Is(err, channeldb.ErrPaymentInFlight) ||
                        errors.Is(err, channeldb.ErrAlreadyPaid) {

                        return status.Error(
                                codes.AlreadyExists, err.Error(),
                        )
                }

                return err
        }

        // Subscribe to the payment before sending it to make sure we won't
        // miss events.
        sub, err := s.subscribePayment(payHash)
        if err != nil {
                return err
        }

        // The payment context is influenced by two user-provided parameters,
        // the cancelable flag and the payment attempt timeout.
        // If the payment is cancelable, we will use the stream context as the
        // payment context. That way, if the user ends the stream, the payment
        // loop will be canceled.
        // The second context parameter is the timeout. If the user provides a
        // timeout, we will additionally wrap the context in a deadline. If the
        // user provided 'cancelable' and ends the stream before the timeout is
        // reached the payment will be canceled.
        ctx := context.Background()
        if req.Cancelable {
                ctx = stream.Context()
        }

        // Send the payment asynchronously.
        s.cfg.Router.SendPaymentAsync(ctx, payment, paySession, shardTracker)

        // Track the payment and return.
        return s.trackPayment(sub, payHash, stream, req.NoInflightUpdates)
}

// EstimateRouteFee allows callers to obtain an expected value w.r.t how much it
// may cost to send an HTLC to the target end destination. This method sends
// probe payments to the target node, based on target invoice parameters and a
// random payment hash that makes it impossible for the target to settle the
// htlc. The probing stops if a user-provided timeout is reached. If provided
// with a destination key and amount, this method will perform a local graph
// based fee estimation.
func (s *Server) EstimateRouteFee(ctx context.Context,
        req *RouteFeeRequest) (*RouteFeeResponse, error) {

        isProbeDestination := len(req.Dest) > 0
        isProbeInvoice := len(req.PaymentRequest) > 0

        switch {
        case isProbeDestination == isProbeInvoice:
                return nil, errors.New("specify either a destination or an " +
                        "invoice")

        case isProbeDestination:
                switch {
                case len(req.Dest) != 33:
                        return nil, errors.New("invalid length destination key")

                case req.AmtSat <= 0:
                        return nil, errors.New("amount must be greater than 0")

                default:
                        return s.probeDestination(req.Dest, req.AmtSat)
                }

        case isProbeInvoice:
                return s.probePaymentRequest(
                        ctx, req.PaymentRequest, req.Timeout,
                )
        }

        return &RouteFeeResponse{}, nil
}

// probeDestination estimates fees along a route to a destination based on the
// contents of the local graph.
func (s *Server) probeDestination(dest []byte, amtSat int64) (*RouteFeeResponse,
        error) {

        destNode, err := route.NewVertexFromBytes(dest)
        if err != nil {
                return nil, err
        }

        // Next, we'll convert the amount in satoshis to mSAT, which are the
        // native unit of LN.
        amtMsat := lnwire.NewMSatFromSatoshis(btcutil.Amount(amtSat))

        // Finally, we'll query for a route to the destination that can carry
        // that target amount, we'll only request a single route. Set a
        // restriction for the default CLTV limit, otherwise we can find a route
        // that exceeds it and is useless to us.
        mc := s.cfg.RouterBackend.MissionControl
        routeReq, err := routing.NewRouteRequest(
                s.cfg.RouterBackend.SelfNode, &destNode, amtMsat, 0,
                &routing.RestrictParams{
                        FeeLimit:          routeFeeLimitSat,
                        CltvLimit:         s.cfg.RouterBackend.MaxTotalTimelock,
                        ProbabilitySource: mc.GetProbability,
                }, nil, nil, nil, s.cfg.RouterBackend.DefaultFinalCltvDelta,
        )
        if err != nil {
                return nil, err
        }

        route, _, err := s.cfg.Router.FindRoute(routeReq)
        if err != nil {
                return nil, err
        }

        // We are adding a block padding to the total time lock to account for
        // the safety buffer that the payment session will add to the last hop's
        // cltv delta. This is to prevent the htlc from failing if blocks are
        // mined while it is in flight.
        timeLockDelay := route.TotalTimeLock + uint32(routing.BlockPadding)

        return &RouteFeeResponse{
                RoutingFeeMsat: int64(route.TotalFees()),
                TimeLockDelay:  int64(timeLockDelay),
                FailureReason:  lnrpc.PaymentFailureReason_FAILURE_REASON_NONE,
        }, nil
}

// probePaymentRequest estimates fees along a route to a destination that is
// specified in an invoice. The estimation duration is limited by a timeout. In
// case that route hints are provided, this method applies a heuristic to
// identify LSPs which might block probe payments. In that case, fees are
// manually calculated and added to the probed fee estimation up until the LSP
// node. If the route hints don't indicate an LSP, they are passed as arguments
// to the SendPayment_V2 method, which enable it to send probe payments to the
// payment request destination.
func (s *Server) probePaymentRequest(ctx context.Context, paymentRequest string,
        timeout uint32) (*RouteFeeResponse, error) {

        payReq, err := zpay32.Decode(
                paymentRequest, s.cfg.RouterBackend.ActiveNetParams,
        )
        if err != nil {
                return nil, err
        }

        if *payReq.MilliSat <= 0 {
                return nil, errors.New("payment request amount must be " +
                        "greater than 0")
        }

        // Generate random payment hash, so we can be sure that the target of
        // the probe payment doesn't have the preimage to settle the htlc.
        var paymentHash lntypes.Hash
        _, err = crand.Read(paymentHash[:])
        if err != nil {
                return nil, fmt.Errorf("cannot generate random probe "+
                        "preimage: %w", err)
        }

        amtMsat := int64(*payReq.MilliSat)
        probeRequest := &SendPaymentRequest{
                TimeoutSeconds:   int32(timeout),
                Dest:             payReq.Destination.SerializeCompressed(),
                MaxParts:         1,
                AllowSelfPayment: false,
                AmtMsat:          amtMsat,
                PaymentHash:      paymentHash[:],
                FeeLimitSat:      routeFeeLimitSat,
                FinalCltvDelta:   int32(payReq.MinFinalCLTVExpiry()),
                DestFeatures:     MarshalFeatures(payReq.Features),
        }

        // If the payment addresses is specified, then we'll also populate that
        // now as well.
        payReq.PaymentAddr.WhenSome(func(addr [32]byte) {
                copy(probeRequest.PaymentAddr, addr[:])
        })

        hints := payReq.RouteHints

        // If the hints don't indicate an LSP then chances are that our probe
        // payment won't be blocked along the route to the destination. We send
        // a probe payment with unmodified route hints.
        if !isLSP(hints) {
                probeRequest.RouteHints = invoicesrpc.CreateRPCRouteHints(hints)
                return s.sendProbePayment(ctx, probeRequest)
        }

        // If the heuristic indicates an LSP we modify the route hints to allow
        // probing the LSP.
        lspAdjustedRouteHints, lspHint, err := prepareLspRouteHints(
                hints, *payReq.MilliSat,
        )
        if err != nil {
                return nil, err
        }

        // The adjusted route hints serve the payment probe to find the last
        // public hop to the LSP on the route.
        probeRequest.Dest = lspHint.NodeID.SerializeCompressed()
        if len(lspAdjustedRouteHints) > 0 {
                probeRequest.RouteHints = invoicesrpc.CreateRPCRouteHints(
                        lspAdjustedRouteHints,
                )
        }

        // The payment probe will be able to calculate the fee up until the LSP
        // node. The fee of the last hop has to be calculated manually. Since
        // the last hop's fee amount has to be sent across the payment path we
        // have to add it to the original payment amount. Only then will the
        // payment probe be able to determine the correct fee to the last hop
        // prior to the private destination. For example, if the user wants to
        // send 1000 sats to a private destination and the last hop's fee is 10
        // sats, then 1010 sats will have to arrive at the last hop. This means
        // that the probe has to be dispatched with 1010 sats to correctly
        // calculate the routing fee.
        //
        // Calculate the hop fee for the last hop manually.
        hopFee := lspHint.HopFee(*payReq.MilliSat)
        if err != nil {
                return nil, err
        }

        // Add the last hop's fee to the requested payment amount that we want
        // to get an estimate for.
        probeRequest.AmtMsat += int64(hopFee)

        // Use the hop hint's cltv delta as the payment request's final cltv
        // delta. The actual final cltv delta of the invoice will be added to
        // the payment probe's cltv delta.
        probeRequest.FinalCltvDelta = int32(lspHint.CLTVExpiryDelta)

        // Dispatch the payment probe with adjusted fee amount.
        resp, err := s.sendProbePayment(ctx, probeRequest)
        if err != nil {
                return nil, err
        }

        // If the payment probe failed we only return the failure reason and
        // leave the probe result params unaltered.
        if resp.FailureReason != lnrpc.PaymentFailureReason_FAILURE_REASON_NONE { //nolint:ll
                return resp, nil
        }

        // The probe succeeded, so we can add the last hop's fee to fee the
        // payment probe returned.
        resp.RoutingFeeMsat += int64(hopFee)

        // Add the final cltv delta of the invoice to the payment probe's total
        // cltv delta. This is the cltv delta for the hop behind the LSP.
        resp.TimeLockDelay += int64(payReq.MinFinalCLTVExpiry())

        return resp, nil
}

// isLSP checks if the route hints indicate an LSP. An LSP is indicated with
// true if the last node in each route hint has the same node id, false
// otherwise.
func isLSP(routeHints [][]zpay32.HopHint) bool {
        if len(routeHints) == 0 || len(routeHints[0]) == 0 {
                return false
        }

        refNodeID := routeHints[0][len(routeHints[0])-1].NodeID
        for i := 1; i < len(routeHints); i++ {
                // Skip empty route hints.
                if len(routeHints[i]) == 0 {
                        continue
                }

                lastHop := routeHints[i][len(routeHints[i])-1]
                idMatchesRefNode := bytes.Equal(
                        lastHop.NodeID.SerializeCompressed(),
                        refNodeID.SerializeCompressed(),
                )
                if !idMatchesRefNode {
                        return false
                }
        }

        return true
}

// prepareLspRouteHints assumes that the isLsp heuristic returned true for the
// route hints passed in here. It constructs a modified list of route hints that
// allows the caller to probe the LSP, which itself is returned as a separate
// hop hint.
func prepareLspRouteHints(routeHints [][]zpay32.HopHint,
        amt lnwire.MilliSatoshi) ([][]zpay32.HopHint, *zpay32.HopHint, error) {

        if len(routeHints) == 0 {
                return nil, nil, fmt.Errorf("no route hints provided")
        }

        // Create the LSP hop hint. We are probing for the worst case fee and
        // cltv delta. So we look for the max values amongst all LSP hop hints.
        refHint := routeHints[0][len(routeHints[0])-1]
        refHint.CLTVExpiryDelta = maxLspCltvDelta(routeHints)
        refHint.FeeBaseMSat, refHint.FeeProportionalMillionths = maxLspFee(
                routeHints, amt,
        )

        // We construct a modified list of route hints that allows the caller to
        // probe the LSP.
        adjustedHints := make([][]zpay32.HopHint, 0, len(routeHints))

        // Strip off the LSP hop hint from all route hints.
        for i := 0; i < len(routeHints); i++ {
                hint := routeHints[i]
                if len(hint) > 1 {
                        adjustedHints = append(
                                adjustedHints, hint[:len(hint)-1],
                        )
                }
        }

        return adjustedHints, &refHint, nil
}

// maxLspFee returns base fee and fee rate amongst all LSP route hints that
// results in the overall highest fee for the given amount.
func maxLspFee(routeHints [][]zpay32.HopHint, amt lnwire.MilliSatoshi) (uint32,
        uint32) {

        var maxFeePpm uint32
        var maxBaseFee uint32
        var maxTotalFee lnwire.MilliSatoshi
        for _, rh := range routeHints {
                lastHop := rh[len(rh)-1]
                lastHopFee := lastHop.HopFee(amt)
                if lastHopFee > maxTotalFee {
                        maxTotalFee = lastHopFee
                        maxBaseFee = lastHop.FeeBaseMSat
                        maxFeePpm = lastHop.FeeProportionalMillionths
                }
        }

        return maxBaseFee, maxFeePpm
}

// maxLspCltvDelta returns the maximum cltv delta amongst all LSP route hints.
func maxLspCltvDelta(routeHints [][]zpay32.HopHint) uint16 {
        var maxCltvDelta uint16
        for _, rh := range routeHints {
                rhLastHop := rh[len(rh)-1]
                if rhLastHop.CLTVExpiryDelta > maxCltvDelta {
                        maxCltvDelta = rhLastHop.CLTVExpiryDelta
                }
        }

        return maxCltvDelta
}

// probePaymentStream is a custom implementation of the grpc.ServerStream
// interface. It is used to send payment status updates to the caller on the
// stream channel.
type probePaymentStream struct {
        Router_SendPaymentV2Server

        stream chan *lnrpc.Payment
        ctx    context.Context //nolint:containedctx
}

// Send sends a payment status update to a payment stream that the caller can
// evaluate.
func (p *probePaymentStream) Send(response *lnrpc.Payment) error {
        select {
        case p.stream <- response:

        case <-p.ctx.Done():
                return p.ctx.Err()
        }

        return nil
}

// Context returns the context of the stream.
func (p *probePaymentStream) Context() context.Context {
        return p.ctx
}

// sendProbePayment sends a payment to a target node in order to obtain
// potential routing fees for it. The payment request has to contain a payment
// hash that is guaranteed to be unknown to the target node, so it cannot settle
// the payment. This method invokes a payment request loop in a goroutine and
// awaits payment status updates.
func (s *Server) sendProbePayment(ctx context.Context,
        req *SendPaymentRequest) (*RouteFeeResponse, error) {

        // We'll launch a goroutine to send the payment probes.
        errChan := make(chan error, 1)
        defer close(errChan)

        paymentStream := &probePaymentStream{
                stream: make(chan *lnrpc.Payment),
                ctx:    ctx,
        }
        go func() {
                err := s.SendPaymentV2(req, paymentStream)
                if err != nil {
                        select {
                        case errChan <- err:

                        case <-paymentStream.ctx.Done():
                                return
                        }
                }
        }()

        for {
                select {
                case payment := <-paymentStream.stream:
                        switch payment.Status {
                        case lnrpc.Payment_INITIATED:
                        case lnrpc.Payment_IN_FLIGHT:
                        case lnrpc.Payment_SUCCEEDED:
                                return nil, errors.New("warning, the fee " +
                                        "estimation payment probe " +
                                        "unexpectedly succeeded. Please reach" +
                                        "out to the probe destination to " +
                                        "negotiate a refund. Otherwise the " +
                                        "payment probe amount is lost forever")

                        case lnrpc.Payment_FAILED:
                                // Incorrect payment details point to a
                                // successful probe.
                                //nolint:ll
                                if payment.FailureReason == lnrpc.PaymentFailureReason_FAILURE_REASON_INCORRECT_PAYMENT_DETAILS {
                                        return paymentDetails(payment)
                                }

                                return &RouteFeeResponse{
                                        RoutingFeeMsat: 0,
                                        TimeLockDelay:  0,
                                        FailureReason:  payment.FailureReason,
                                }, nil

                        default:
                                return nil, errors.New("unexpected payment " +
                                        "status")
                        }

                case err := <-errChan:
                        return nil, err

                case <-s.quit:
                        return nil, errServerShuttingDown
                }
        }
}

func paymentDetails(payment *lnrpc.Payment) (*RouteFeeResponse, error) {
        fee, timeLock, err := timelockAndFee(payment)
        if errors.Is(err, errUnexpectedFailureSource) {
                return nil, err
        }

        return &RouteFeeResponse{
                RoutingFeeMsat: fee,
                TimeLockDelay:  timeLock,
                FailureReason:  lnrpc.PaymentFailureReason_FAILURE_REASON_NONE,
        }, nil
}

// timelockAndFee returns the fee and total time lock of the last payment
// attempt.
func timelockAndFee(p *lnrpc.Payment) (int64, int64, error) {
        if len(p.Htlcs) == 0 {
                return 0, 0, nil
        }

        lastAttempt := p.Htlcs[len(p.Htlcs)-1]
        if lastAttempt == nil {
                return 0, 0, errMissingPaymentAttempt
        }

        lastRoute := lastAttempt.Route
        if lastRoute == nil {
                return 0, 0, errMissingRoute
        }

        hopFailureIndex := lastAttempt.Failure.FailureSourceIndex
        finalHopIndex := uint32(len(lastRoute.Hops))
        if hopFailureIndex != finalHopIndex {
                return 0, 0, errUnexpectedFailureSource
        }

        return lastRoute.TotalFeesMsat, int64(lastRoute.TotalTimeLock), nil
}

// SendToRouteV2 sends a payment through a predefined route. The response of
// this call contains structured error information.
func (s *Server) SendToRouteV2(ctx context.Context,
        req *SendToRouteRequest) (*lnrpc.HTLCAttempt, error) {

        if req.Route == nil {
                return nil, fmt.Errorf("unable to send, no routes provided")
        }

        route, err := s.cfg.RouterBackend.UnmarshallRoute(req.Route)
        if err != nil {
                return nil, err
        }

        hash, err := lntypes.MakeHash(req.PaymentHash)
        if err != nil {
                return nil, err
        }

        firstHopRecords := lnwire.CustomRecords(req.FirstHopCustomRecords)
        if err := firstHopRecords.Validate(); err != nil {
                return nil, err
        }

        var attempt *channeldb.HTLCAttempt

        // Pass route to the router. This call returns the full htlc attempt
        // information as it is stored in the database. It is possible that both
        // the attempt return value and err are non-nil. This can happen when
        // the attempt was already initiated before the error happened. In that
        // case, we give precedence to the attempt information as stored in the
        // db.
        if req.SkipTempErr {
                attempt, err = s.cfg.Router.SendToRouteSkipTempErr(
                        hash, route, firstHopRecords,
                )
        } else {
                attempt, err = s.cfg.Router.SendToRoute(
                        hash, route, firstHopRecords,
                )
        }
        if attempt != nil {
                rpcAttempt, err := s.cfg.RouterBackend.MarshalHTLCAttempt(
                        *attempt,
                )
                if err != nil {
                        return nil, err
                }
                return rpcAttempt, nil
        }

        // Transform user errors to grpc code.
        switch {
        case errors.Is(err, channeldb.ErrPaymentExists):
                fallthrough

        case errors.Is(err, channeldb.ErrPaymentInFlight):
                fallthrough

        case errors.Is(err, channeldb.ErrAlreadyPaid):
                return nil, status.Error(
                        codes.AlreadyExists, err.Error(),
                )
        }

        return nil, err
}

// ResetMissionControl clears all mission control state and starts with a clean
// slate.
func (s *Server) ResetMissionControl(ctx context.Context,
        req *ResetMissionControlRequest) (*ResetMissionControlResponse, error) {

        err := s.cfg.RouterBackend.MissionControl.ResetHistory()
        if err != nil {
                return nil, err
        }

        return &ResetMissionControlResponse{}, nil
}

// GetMissionControlConfig returns our current mission control config.
func (s *Server) GetMissionControlConfig(ctx context.Context,
        req *GetMissionControlConfigRequest) (*GetMissionControlConfigResponse,
        error) {

        // Query the current mission control config.
        cfg := s.cfg.RouterBackend.MissionControl.GetConfig()
        resp := &GetMissionControlConfigResponse{
                Config: &MissionControlConfig{
                        MaximumPaymentResults: uint32(cfg.MaxMcHistory),
                        MinimumFailureRelaxInterval: uint64(
                                cfg.MinFailureRelaxInterval.Seconds(),
                        ),
                },
        }

        // We only populate fields based on the current estimator.
        switch v := cfg.Estimator.Config().(type) {
        case routing.AprioriConfig:
                resp.Config.Model = MissionControlConfig_APRIORI
                aCfg := AprioriParameters{
                        HalfLifeSeconds:  uint64(v.PenaltyHalfLife.Seconds()),
                        HopProbability:   v.AprioriHopProbability,
                        Weight:           v.AprioriWeight,
                        CapacityFraction: v.CapacityFraction,
                }

                // Populate deprecated fields.
                resp.Config.HalfLifeSeconds = uint64(
                        v.PenaltyHalfLife.Seconds(),
                )
                resp.Config.HopProbability = float32(v.AprioriHopProbability)
                resp.Config.Weight = float32(v.AprioriWeight)

                resp.Config.EstimatorConfig = &MissionControlConfig_Apriori{
                        Apriori: &aCfg,
                }

        case routing.BimodalConfig:
                resp.Config.Model = MissionControlConfig_BIMODAL
                bCfg := BimodalParameters{
                        NodeWeight: v.BimodalNodeWeight,
                        ScaleMsat:  uint64(v.BimodalScaleMsat),
                        DecayTime:  uint64(v.BimodalDecayTime.Seconds()),
                }

                resp.Config.EstimatorConfig = &MissionControlConfig_Bimodal{
                        Bimodal: &bCfg,
                }

        default:
                return nil, fmt.Errorf("unknown estimator config type %T", v)
        }

        return resp, nil
}

// SetMissionControlConfig sets parameters in the mission control config.
func (s *Server) SetMissionControlConfig(ctx context.Context,
        req *SetMissionControlConfigRequest) (*SetMissionControlConfigResponse,
        error) {

        mcCfg := &routing.MissionControlConfig{
                MaxMcHistory: int(req.Config.MaximumPaymentResults),
                MinFailureRelaxInterval: time.Duration(
                        req.Config.MinimumFailureRelaxInterval,
                ) * time.Second,
        }

        switch req.Config.Model {
        case MissionControlConfig_APRIORI:
                var aprioriConfig routing.AprioriConfig

                // Determine the apriori config with backward compatibility
                // should the api use deprecated fields.
                switch v := req.Config.EstimatorConfig.(type) {
                case *MissionControlConfig_Bimodal:
                        return nil, fmt.Errorf("bimodal config " +
                                "provided, but apriori model requested")

                case *MissionControlConfig_Apriori:
                        aprioriConfig = routing.AprioriConfig{
                                PenaltyHalfLife: time.Duration(
                                        v.Apriori.HalfLifeSeconds,
                                ) * time.Second,
                                AprioriHopProbability: v.Apriori.HopProbability,
                                AprioriWeight:         v.Apriori.Weight,
                                CapacityFraction: v.Apriori.
                                        CapacityFraction,
                        }

                default:
                        aprioriConfig = routing.AprioriConfig{
                                PenaltyHalfLife: time.Duration(
                                        int64(req.Config.HalfLifeSeconds),
                                ) * time.Second,
                                AprioriHopProbability: float64(
                                        req.Config.HopProbability,
                                ),
                                AprioriWeight:    float64(req.Config.Weight),
                                CapacityFraction: routing.DefaultCapacityFraction, //nolint:ll
                        }
                }

                estimator, err := routing.NewAprioriEstimator(aprioriConfig)
                if err != nil {
                        return nil, err
                }
                mcCfg.Estimator = estimator

        case MissionControlConfig_BIMODAL:
                cfg, ok := req.Config.
                        EstimatorConfig.(*MissionControlConfig_Bimodal)
                if !ok {
                        return nil, fmt.Errorf("bimodal estimator requested " +
                                "but corresponding config not set")
                }
                bCfg := cfg.Bimodal

                bimodalConfig := routing.BimodalConfig{
                        BimodalDecayTime: time.Duration(
                                bCfg.DecayTime,
                        ) * time.Second,
                        BimodalScaleMsat:  lnwire.MilliSatoshi(bCfg.ScaleMsat),
                        BimodalNodeWeight: bCfg.NodeWeight,
                }

                estimator, err := routing.NewBimodalEstimator(bimodalConfig)
                if err != nil {
                        return nil, err
                }
                mcCfg.Estimator = estimator

        default:
                return nil, fmt.Errorf("unknown estimator type %v",
                        req.Config.Model)
        }

        return &SetMissionControlConfigResponse{},
                s.cfg.RouterBackend.MissionControl.SetConfig(mcCfg)
}

// QueryMissionControl exposes the internal mission control state to callers. It
// is a development feature.
func (s *Server) QueryMissionControl(_ context.Context,
        _ *QueryMissionControlRequest) (*QueryMissionControlResponse, error) {

        snapshot := s.cfg.RouterBackend.MissionControl.GetHistorySnapshot()

        rpcPairs := make([]*PairHistory, 0, len(snapshot.Pairs))
        for _, p := range snapshot.Pairs {
                // Prevent binding to loop variable.
                pair := p

                rpcPair := PairHistory{
                        NodeFrom: pair.Pair.From[:],
                        NodeTo:   pair.Pair.To[:],
                        History:  toRPCPairData(&pair.TimedPairResult),
                }

                rpcPairs = append(rpcPairs, &rpcPair)
        }

        response := QueryMissionControlResponse{
                Pairs: rpcPairs,
        }

        return &response, nil
}

// toRPCPairData marshalls mission control pair data to the rpc struct.
func toRPCPairData(data *routing.TimedPairResult) *PairData {
        rpcData := PairData{
                FailAmtSat:     int64(data.FailAmt.ToSatoshis()),
                FailAmtMsat:    int64(data.FailAmt),
                SuccessAmtSat:  int64(data.SuccessAmt.ToSatoshis()),
                SuccessAmtMsat: int64(data.SuccessAmt),
        }

        if !data.FailTime.IsZero() {
                rpcData.FailTime = data.FailTime.Unix()
        }

        if !data.SuccessTime.IsZero() {
                rpcData.SuccessTime = data.SuccessTime.Unix()
        }

        return &rpcData
}

// XImportMissionControl imports the state provided to our internal mission
// control. Only entries that are fresher than our existing state will be used.
func (s *Server) XImportMissionControl(_ context.Context,
        req *XImportMissionControlRequest) (*XImportMissionControlResponse,
        error) {

        if len(req.Pairs) == 0 {
                return nil, errors.New("at least one pair required for import")
        }

        snapshot := &routing.MissionControlSnapshot{
                Pairs: make(
                        []routing.MissionControlPairSnapshot, len(req.Pairs),
                ),
        }

        for i, pairResult := range req.Pairs {
                pairSnapshot, err := toPairSnapshot(pairResult)
                if err != nil {
                        return nil, err
                }

                snapshot.Pairs[i] = *pairSnapshot
        }

        err := s.cfg.RouterBackend.MissionControl.ImportHistory(
                snapshot, req.Force,
        )
        if err != nil {
                return nil, err
        }

        return &XImportMissionControlResponse{}, nil
}

func toPairSnapshot(pairResult *PairHistory) (*routing.MissionControlPairSnapshot,
        error) {

        from, err := route.NewVertexFromBytes(pairResult.NodeFrom)
        if err != nil {
                return nil, err
        }

        to, err := route.NewVertexFromBytes(pairResult.NodeTo)
        if err != nil {
                return nil, err
        }

        pairPrefix := fmt.Sprintf("pair: %v -> %v:", from, to)

        if from == to {
                return nil, fmt.Errorf("%v source and destination node must "+
                        "differ", pairPrefix)
        }

        failAmt, failTime, err := getPair(
                lnwire.MilliSatoshi(pairResult.History.FailAmtMsat),
                btcutil.Amount(pairResult.History.FailAmtSat),
                pairResult.History.FailTime,
                true,
        )
        if err != nil {
                return nil, fmt.Errorf("%v invalid failure: %w", pairPrefix,
                        err)
        }

        successAmt, successTime, err := getPair(
                lnwire.MilliSatoshi(pairResult.History.SuccessAmtMsat),
                btcutil.Amount(pairResult.History.SuccessAmtSat),
                pairResult.History.SuccessTime,
                false,
        )
        if err != nil {
                return nil, fmt.Errorf("%v invalid success: %w", pairPrefix,
                        err)
        }

        if successAmt == 0 && failAmt == 0 {
                return nil, fmt.Errorf("%v: either success or failure result "+
                        "required", pairPrefix)
        }

        pair := routing.NewDirectedNodePair(from, to)

        result := &routing.TimedPairResult{
                FailAmt:     failAmt,
                FailTime:    failTime,
                SuccessAmt:  successAmt,
                SuccessTime: successTime,
        }

        return &routing.MissionControlPairSnapshot{
                Pair:            pair,
                TimedPairResult: *result,
        }, nil
}

// getPair validates the values provided for a mission control result and
// returns the msat amount and timestamp for it. `isFailure` can be used to
// default values to 0 instead of returning an error.
func getPair(amtMsat lnwire.MilliSatoshi, amtSat btcutil.Amount,
        timestamp int64, isFailure bool) (lnwire.MilliSatoshi, time.Time,
        error) {

        amt, err := getMsatPairValue(amtMsat, amtSat)
        if err != nil {
                return 0, time.Time{}, err
        }

        var (
                timeSet   = timestamp != 0
                amountSet = amt != 0
        )

        switch {
        // If a timestamp and amount if provided, return those values.
        case timeSet && amountSet:
                return amt, time.Unix(timestamp, 0), nil

        // Return an error if it does have a timestamp without an amount, and
        // it's not expected to be a failure.
        case !isFailure && timeSet && !amountSet:
                return 0, time.Time{}, errors.New("non-zero timestamp " +
                        "requires non-zero amount for success pairs")

        // Return an error if it does have an amount without a timestamp, and
        // it's not expected to be a failure.
        case !isFailure && !timeSet && amountSet:
                return 0, time.Time{}, errors.New("non-zero amount for " +
                        "success pairs requires non-zero timestamp")

        default:
                return 0, time.Time{}, nil
        }
}

// getMsatPairValue checks the msat and sat values set for a pair and ensures
// that the values provided are either the same, or only a single value is set.
func getMsatPairValue(msatValue lnwire.MilliSatoshi,
        satValue btcutil.Amount) (lnwire.MilliSatoshi, error) {

        // If our msat value converted to sats equals our sat value, we just
        // return the msat value, since the values are the same.
        if msatValue.ToSatoshis() == satValue {
                return msatValue, nil
        }

        // If we have no msatValue, we can just return our state value even if
        // it is zero, because it's impossible that we have mismatched values.
        if msatValue == 0 {
                return lnwire.MilliSatoshi(satValue * 1000), nil
        }

        // Likewise, we can just use msat value if we have no sat value set.
        if satValue == 0 {
                return msatValue, nil
        }

        // If our values are non-zero but not equal, we have invalid amounts
        // set, so we fail.
        return 0, fmt.Errorf("msat: %v and sat: %v values not equal", msatValue,
                satValue)
}

// TrackPaymentV2 returns a stream of payment state updates. The stream is
// closed when the payment completes.
func (s *Server) TrackPaymentV2(request *TrackPaymentRequest,
        stream Router_TrackPaymentV2Server) error {

        payHash, err := lntypes.MakeHash(request.PaymentHash)
        if err != nil {
                return err
        }

        log.Debugf("TrackPayment called for payment %v", payHash)

        // Make the subscription.
        sub, err := s.subscribePayment(payHash)
        if err != nil {
                return err
        }

        return s.trackPayment(sub, payHash, stream, request.NoInflightUpdates)
}

// subscribePayment subscribes to the payment updates for the given payment
// hash.
func (s *Server) subscribePayment(identifier lntypes.Hash) (
        routing.ControlTowerSubscriber, error) {

        // Make the subscription.
        router := s.cfg.RouterBackend
        sub, err := router.Tower.SubscribePayment(identifier)

        switch {
        case errors.Is(err, channeldb.ErrPaymentNotInitiated):
                return nil, status.Error(codes.NotFound, err.Error())

        case err != nil:
                return nil, err
        }

        return sub, nil
}

// trackPayment writes payment status updates to the provided stream.
func (s *Server) trackPayment(subscription routing.ControlTowerSubscriber,
        identifier lntypes.Hash, stream Router_TrackPaymentV2Server,
        noInflightUpdates bool) error {

        err := s.trackPaymentStream(
                stream.Context(), subscription, noInflightUpdates, stream.Send,
        )
        switch {
        case err == nil:
                return nil

        // If the context is canceled, we don't return an error.
        case errors.Is(err, context.Canceled):
                log.Infof("Payment stream %v canceled", identifier)

                return nil

        default:
        }

        // Otherwise, we will log and return the error as the stream has
        // received an error from the payment lifecycle.
        log.Errorf("TrackPayment got error for payment %v: %v", identifier, err)

        return err
}

// TrackPayments returns a stream of payment state updates.
func (s *Server) TrackPayments(request *TrackPaymentsRequest,
        stream Router_TrackPaymentsServer) error {

        log.Debug("TrackPayments called")

        router := s.cfg.RouterBackend

        // Subscribe to payments.
        subscription, err := router.Tower.SubscribeAllPayments()
        if err != nil {
                return err
        }

        // Stream updates to the client.
        err = s.trackPaymentStream(
                stream.Context(), subscription, request.NoInflightUpdates,
                stream.Send,
        )

        if errors.Is(err, context.Canceled) {
                log.Debugf("TrackPayments payment stream canceled.")
        }

        return err
}

// trackPaymentStream streams payment updates to the client.
func (s *Server) trackPaymentStream(context context.Context,
        subscription routing.ControlTowerSubscriber, noInflightUpdates bool,
        send func(*lnrpc.Payment) error) error {

        defer subscription.Close()

        // Stream updates back to the client.
        for {
                select {
                case item, ok := <-subscription.Updates():
                        if !ok {
                                // No more payment updates.
                                return nil
                        }
                        result := item.(*channeldb.MPPayment)

                        log.Tracef("Payment %v updated to state %v",
                                result.Info.PaymentIdentifier, result.Status)

                        // Skip in-flight updates unless requested.
                        if noInflightUpdates {
                                if result.Status == channeldb.StatusInitiated {
                                        continue
                                }
                                if result.Status == channeldb.StatusInFlight {
                                        continue
                                }
                        }

                        rpcPayment, err := s.cfg.RouterBackend.MarshallPayment(
                                result,
                        )
                        if err != nil {
                                return err
                        }

                        // Send event to the client.
                        err = send(rpcPayment)
                        if err != nil {
                                return err
                        }

                case <-s.quit:
                        return errServerShuttingDown

                case <-context.Done():
                        return context.Err()
                }
        }
}

// BuildRoute builds a route from a list of hop addresses.
func (s *Server) BuildRoute(_ context.Context,
        req *BuildRouteRequest) (*BuildRouteResponse, error) {

        if len(req.HopPubkeys) == 0 {
                return nil, errors.New("no hops specified")
        }

        // Unmarshall hop list.
        hops := make([]route.Vertex, len(req.HopPubkeys))
        for i, pubkeyBytes := range req.HopPubkeys {
                pubkey, err := route.NewVertexFromBytes(pubkeyBytes)
                if err != nil {
                        return nil, err
                }
                hops[i] = pubkey
        }

        // Prepare BuildRoute call parameters from rpc request.
        var amt fn.Option[lnwire.MilliSatoshi]
        if req.AmtMsat != 0 {
                rpcAmt := lnwire.MilliSatoshi(req.AmtMsat)
                amt = fn.Some(rpcAmt)
        }

        var outgoingChan *uint64
        if req.OutgoingChanId != 0 {
                outgoingChan = &req.OutgoingChanId
        }

        var payAddr fn.Option[[32]byte]
        if len(req.PaymentAddr) != 0 {
                var backingPayAddr [32]byte
                copy(backingPayAddr[:], req.PaymentAddr)

                payAddr = fn.Some(backingPayAddr)
        }

        if req.FinalCltvDelta == 0 {
                req.FinalCltvDelta = int32(
                        s.cfg.RouterBackend.DefaultFinalCltvDelta,
                )
        }

        var firstHopBlob fn.Option[[]byte]
        if len(req.FirstHopCustomRecords) > 0 {
                firstHopRecords := lnwire.CustomRecords(
                        req.FirstHopCustomRecords,
                )
                if err := firstHopRecords.Validate(); err != nil {
                        return nil, err
                }

                firstHopData, err := firstHopRecords.Serialize()
                if err != nil {
                        return nil, err
                }
                firstHopBlob = fn.Some(firstHopData)
        }

        // Build the route and return it to the caller.
        route, err := s.cfg.Router.BuildRoute(
                amt, hops, outgoingChan, req.FinalCltvDelta, payAddr,
                firstHopBlob,
        )
        if err != nil {
                return nil, err
        }

        rpcRoute, err := s.cfg.RouterBackend.MarshallRoute(route)
        if err != nil {
                return nil, err
        }

        routeResp := &BuildRouteResponse{
                Route: rpcRoute,
        }

        return routeResp, nil
}

// SubscribeHtlcEvents creates a uni-directional stream from the server to
// the client which delivers a stream of htlc events.
func (s *Server) SubscribeHtlcEvents(_ *SubscribeHtlcEventsRequest,
        stream Router_SubscribeHtlcEventsServer) error {

        htlcClient, err := s.cfg.RouterBackend.SubscribeHtlcEvents()
        if err != nil {
                return err
        }
        defer htlcClient.Cancel()

        // Send out an initial subscribed event so that the caller knows the
        // point from which new events will be transmitted.
        if err := stream.Send(&HtlcEvent{
                Event: &HtlcEvent_SubscribedEvent{
                        SubscribedEvent: &SubscribedEvent{},
                },
        }); err != nil {
                return err
        }

        for {
                select {
                case event := <-htlcClient.Updates():
                        rpcEvent, err := rpcHtlcEvent(event)
                        if err != nil {
                                return err
                        }

                        if err := stream.Send(rpcEvent); err != nil {
                                return err
                        }

                // If the stream's context is cancelled, return an error.
                case <-stream.Context().Done():
                        log.Debugf("htlc event stream cancelled")
                        return stream.Context().Err()

                // If the subscribe client terminates, exit with an error.
                case <-htlcClient.Quit():
                        return errors.New("htlc event subscription terminated")

                // If the server has been signalled to shut down, exit.
                case <-s.quit:
                        return errServerShuttingDown
                }
        }
}

// HtlcInterceptor is a bidirectional stream for streaming interception
// requests to the caller.
// Upon connection, it does the following:
// 1. Check if there is already a live stream, if yes it rejects the request.
// 2. Registered a ForwardInterceptor
// 3. Delivers to the caller every √√ and detect his answer.
// It uses a local implementation of holdForwardsStore to keep all the hold
// forwards and find them when manual resolution is later needed.
func (s *Server) HtlcInterceptor(stream Router_HtlcInterceptorServer) error {
        // We ensure there is only one interceptor at a time.
        if !atomic.CompareAndSwapInt32(&s.forwardInterceptorActive, 0, 1) {
                return ErrInterceptorAlreadyExists
        }
        defer atomic.CompareAndSwapInt32(&s.forwardInterceptorActive, 1, 0)

        // Run the forward interceptor.
        return newForwardInterceptor(
                s.cfg.RouterBackend.InterceptableForwarder, stream,
        ).run()
}

// XAddLocalChanAliases is an experimental API that creates a set of new
// channel SCID alias mappings. The final total set of aliases in the manager
// after the add operation is returned. This is only a locally stored alias, and
// will not be communicated to the channel peer via any message. Therefore,
// routing over such an alias will only work if the peer also calls this same
// RPC on their end. If an alias already exists, an error is returned.
func (s *Server) XAddLocalChanAliases(_ context.Context,
        in *AddAliasesRequest) (*AddAliasesResponse, error) {

        existingAliases := s.cfg.AliasMgr.ListAliases()

        // aliasExists checks if the new alias already exists in the alias map.
        aliasExists := func(newAlias uint64,
                baseScid lnwire.ShortChannelID) (bool, error) {

                // First check that we actually have a channel for the given
                // base scid. This should succeed for any channel where the
                // option-scid-alias feature bit was negotiated.
                if _, ok := existingAliases[baseScid]; !ok {
                        return false, fmt.Errorf("base scid %v not found",
                                baseScid)
                }

                for base, aliases := range existingAliases {
                        for _, alias := range aliases {
                                exists := alias.ToUint64() == newAlias

                                // Trying to add an alias that we already have
                                // for another channel is wrong.
                                if exists && base != baseScid {
                                        return true, fmt.Errorf("%w: alias %v "+
                                                "already exists for base scid "+
                                                "%v", ErrAliasAlreadyExists,
                                                alias, base)
                                }

                                if exists {
                                        return true, nil
                                }
                        }
                }

                return false, nil
        }

        for _, v := range in.AliasMaps {
                baseScid := lnwire.NewShortChanIDFromInt(v.BaseScid)

                for _, rpcAlias := range v.Aliases {
                        // If not, let's add it to the alias manager now.
                        aliasScid := lnwire.NewShortChanIDFromInt(rpcAlias)

                        // But we only add it, if it's a valid alias, as defined
                        // by the BOLT spec.
                        if !aliasmgr.IsAlias(aliasScid) {
                                return nil, fmt.Errorf("%w: SCID alias %v is "+
                                        "not a valid alias", ErrNoValidAlias,
                                        aliasScid)
                        }

                        exists, err := aliasExists(rpcAlias, baseScid)
                        if err != nil {
                                return nil, err
                        }

                        // If the alias already exists, we see that as an error.
                        // This is to avoid "silent" collisions.
                        if exists {
                                return nil, fmt.Errorf("%w: SCID alias %v "+
                                        "already exists", ErrAliasAlreadyExists,
                                        rpcAlias)
                        }

                        err = s.cfg.AliasMgr.AddLocalAlias(
                                aliasScid, baseScid, false, true,
                        )
                        if err != nil {
                                return nil, fmt.Errorf("error adding scid "+
                                        "alias, base_scid=%v, alias_scid=%v: "+
                                        "%w", baseScid, aliasScid, err)
                        }
                }
        }

        return &AddAliasesResponse{
                AliasMaps: lnrpc.MarshalAliasMap(s.cfg.AliasMgr.ListAliases()),
        }, nil
}

// XDeleteLocalChanAliases is an experimental API that deletes a set of alias
// mappings. The final total set of aliases in the manager after the delete
// operation is returned. The deletion will not be communicated to the channel
// peer via any message.
func (s *Server) XDeleteLocalChanAliases(_ context.Context,
        in *DeleteAliasesRequest) (*DeleteAliasesResponse,
        error) {

        for _, v := range in.AliasMaps {
                baseScid := lnwire.NewShortChanIDFromInt(v.BaseScid)

                for _, alias := range v.Aliases {
                        aliasScid := lnwire.NewShortChanIDFromInt(alias)

                        err := s.cfg.AliasMgr.DeleteLocalAlias(
                                aliasScid, baseScid,
                        )
                        if err != nil {
                                return nil, fmt.Errorf("error deleting scid "+
                                        "alias, base_scid=%v, alias_scid=%v: "+
                                        "%w", baseScid, aliasScid, err)
                        }
                }
        }

        return &DeleteAliasesResponse{
                AliasMaps: lnrpc.MarshalAliasMap(s.cfg.AliasMgr.ListAliases()),
        }, nil
}

func extractOutPoint(req *UpdateChanStatusRequest) (*wire.OutPoint, error) {
        chanPoint := req.GetChanPoint()
        txid, err := lnrpc.GetChanPointFundingTxid(chanPoint)
        if err != nil {
                return nil, err
        }
        index := chanPoint.OutputIndex
        return wire.NewOutPoint(txid, index), nil
}

// UpdateChanStatus allows channel state to be set manually.
func (s *Server) UpdateChanStatus(_ context.Context,
        req *UpdateChanStatusRequest) (*UpdateChanStatusResponse, error) {

        outPoint, err := extractOutPoint(req)
        if err != nil {
                return nil, err
        }

        action := req.GetAction()

        log.Debugf("UpdateChanStatus called for channel(%v) with "+
                "action %v", outPoint, action)

        switch action {
        case ChanStatusAction_ENABLE:
                err = s.cfg.RouterBackend.SetChannelEnabled(*outPoint)
        case ChanStatusAction_DISABLE:
                err = s.cfg.RouterBackend.SetChannelDisabled(*outPoint)
        case ChanStatusAction_AUTO:
                err = s.cfg.RouterBackend.SetChannelAuto(*outPoint)
        default:
                err = fmt.Errorf("unrecognized ChannelStatusAction %v", action)
        }

        if err != nil {
                return nil, err
        }
        return &UpdateChanStatusResponse{}, nil
}

lightningnetwork / lnd / 13481890706

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous