13536249039

Committed 26 Feb 2025 03:42AM UTC coverage: 57.462% (-1.4%) from 58.835%

Build # 13536249039

Build Type

Pull #8453

github

Committed by

Roasbeef

Commit Message

peer: update chooseDeliveryScript to gen script if needed

In this commit, we update `chooseDeliveryScript` to generate a new
script if needed. This allows us to fold in a few other lines that
always followed this function into this expanded function.

The tests have been updated accordingly.

Pull Request Pull Request #8453: [4/4] - multi: integrate new rbf coop close FSM into the existing peer flow

Run Details

275 of 1318 new or added lines in 22 files covered. (20.86%)

19521 existing lines in 257 files now uncovered.

103858 of 180741 relevant lines covered (57.46%)

24750.23 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

70.47

/contractcourt/utxonursery.go

package contractcourt

import (
        "bytes"
        "encoding/binary"
        "errors"
        "fmt"
        "io"
        "sync"
        "sync/atomic"

        "github.com/btcsuite/btcd/btcutil"
        "github.com/btcsuite/btcd/txscript"
        "github.com/btcsuite/btcd/wire"
        "github.com/davecgh/go-spew/spew"
        "github.com/lightningnetwork/lnd/chainntnfs"
        "github.com/lightningnetwork/lnd/channeldb"
        "github.com/lightningnetwork/lnd/fn/v2"
        graphdb "github.com/lightningnetwork/lnd/graph/db"
        "github.com/lightningnetwork/lnd/input"
        "github.com/lightningnetwork/lnd/labels"
        "github.com/lightningnetwork/lnd/lnutils"
        "github.com/lightningnetwork/lnd/lnwallet"
        "github.com/lightningnetwork/lnd/sweep"
        "github.com/lightningnetwork/lnd/tlv"
)

//                          SUMMARY OF OUTPUT STATES
//
//  - CRIB
//    - SerializedType: babyOutput
//    - OriginalOutputType: HTLC
//    - Awaiting: First-stage HTLC CLTV expiry
//    - HeightIndexEntry: Absolute block height of CLTV expiry.
//    - NextState: KNDR
//  - PSCL
//    - SerializedType: kidOutput
//    - OriginalOutputType: Commitment
//    - Awaiting: Confirmation of commitment txn
//    - HeightIndexEntry: None.
//    - NextState: KNDR
//  - KNDR
//    - SerializedType: kidOutput
//    - OriginalOutputType: Commitment or HTLC
//    - Awaiting: Commitment CSV expiry or second-stage HTLC CSV expiry.
//    - HeightIndexEntry: Input confirmation height + relative CSV delay
//    - NextState: GRAD
//  - GRAD:
//    - SerializedType: kidOutput
//    - OriginalOutputType: Commitment or HTLC
//    - Awaiting: All other outputs in channel to become GRAD.
//    - NextState: Mark channel fully closed in channeldb and remove.
//
//                        DESCRIPTION OF OUTPUT STATES
//
// TODO(roasbeef): update comment with both new output types
//
//  - CRIB (babyOutput) outputs are two-stage htlc outputs that are initially
//    locked using a CLTV delay, followed by a CSV delay. The first stage of a
//    crib output requires broadcasting a presigned htlc timeout txn generated
//    by the wallet after an absolute expiry height. Since the timeout txns are
//    predetermined, they cannot be batched after-the-fact, meaning that all
//    CRIB outputs are broadcast and confirmed independently. After the first
//    stage is complete, a CRIB output is moved to the KNDR state, which will
//    finishing sweeping the second-layer CSV delay.
//
//  - PSCL (kidOutput) outputs are commitment outputs locked under a CSV delay.
//    These outputs are stored temporarily in this state until the commitment
//    transaction confirms, as this solidifies an absolute height that the
//    relative time lock will expire. Once this maturity height is determined,
//    the PSCL output is moved into KNDR.
//
//  - KNDR (kidOutput) outputs are CSV delayed outputs for which the maturity
//    height has been fully determined. This results from having received
//    confirmation of the UTXO we are trying to spend, contained in either the
//    commitment txn or htlc timeout txn. Once the maturity height is reached,
//    the utxo nursery will sweep all KNDR outputs scheduled for that height
//    using a single txn.
//
//  - GRAD (kidOutput) outputs are KNDR outputs that have successfully been
//    swept into the user's wallet. A channel is considered mature once all of
//    its outputs, including two-stage htlcs, have entered the GRAD state,
//    indicating that it safe to mark the channel as fully closed.
//
//
//                     OUTPUT STATE TRANSITIONS IN UTXO NURSERY
//
//      ┌────────────────┐            ┌──────────────┐
//      │ Commit Outputs │            │ HTLC Outputs │
//      └────────────────┘            └──────────────┘
//               │                            │
//               │                            │
//               │                            │               UTXO NURSERY
//   ┌───────────┼────────────────┬───────────┼───────────────────────────────┐
//   │           │                            │                               │
//   │           │                │           │                               │
//   │           │                            │           CLTV-Delayed        │
//   │           │                │           V            babyOutputs        │
//   │           │                        ┌──────┐                            │
//   │           │                │       │ CRIB │                            │
//   │           │                        └──────┘                            │
//   │           │                │           │                               │
//   │           │                            │                               │
//   │           │                │           |                               │
//   │           │                            V    Wait CLTV                  │
//   │           │                │          [ ]       +                      │
//   │           │                            |   Publish Txn                 │
//   │           │                │           │                               │
//   │           │                            │                               │
//   │           │                │           V ┌ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─┐        │
//   │           │                           ( )  waitForTimeoutConf          │
//   │           │                │           | └ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─┘        │
//   │           │                            │                               │
//   │           │                │           │                               │
//   │           │                            │                               │
//   │           V                │           │                               │
//   │       ┌──────┐                         │                               │
//   │       │ PSCL │             └  ──  ──  ─┼  ──  ──  ──  ──  ──  ──  ──  ─┤
//   │       └──────┘                         │                               │
//   │           │                            │                               │
//   │           │                            │                               │
//   │           V ┌ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─┐     │            CSV-Delayed        │
//   │          ( )  waitForCommitConf        │             kidOutputs        │
//   │           | └ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─┘     │                               │
//   │           │                            │                               │
//   │           │                            │                               │
//   │           │                            V                               │
//   │           │                        ┌──────┐                            │
//   │           └─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─▶│ KNDR │                            │
//   │                                    └──────┘                            │
//   │                                        │                               │
//   │                                        │                               │
//   │                                        |                               │
//   │                                        V     Wait CSV                  │
//   │                                       [ ]       +                      │
//   │                                        |   Publish Txn                 │
//   │                                        │                               │
//   │                                        │                               │
//   │                                        V ┌ ─ ─ ─ ─ ─ ─ ─ ─ ─ ┐         │
//   │                                       ( )  waitForSweepConf            │
//   │                                        | └ ─ ─ ─ ─ ─ ─ ─ ─ ─ ┘         │
//   │                                        │                               │
//   │                                        │                               │
//   │                                        V                               │
//   │                                     ┌──────┐                           │
//   │                                     │ GRAD │                           │
//   │                                     └──────┘                           │
//   │                                        │                               │
//   │                                        │                               │
//   │                                        │                               │
//   └────────────────────────────────────────┼───────────────────────────────┘
//                                            │
//                                            │
//                                            │
//                                            │
//                                            V
//                                   ┌────────────────┐
//                                   │ Wallet Outputs │
//                                   └────────────────┘

var byteOrder = binary.BigEndian

const (
        // kgtnOutputConfTarget is the default confirmation target we'll use for
        // sweeps of CSV delayed outputs.
        kgtnOutputConfTarget = 6
)

var (
        // ErrContractNotFound is returned when the nursery is unable to
        // retrieve information about a queried contract.
        ErrContractNotFound = fmt.Errorf("unable to locate contract")
)

// NurseryConfig abstracts the required subsystems used by the utxo nursery. An
// instance of NurseryConfig is passed to newUtxoNursery during instantiation.
type NurseryConfig struct {
        // ChainIO is used by the utxo nursery to determine the current block
        // height, which drives the incubation of the nursery's outputs.
        ChainIO lnwallet.BlockChainIO

        // ConfDepth is the number of blocks the nursery store waits before
        // determining outputs in the chain as confirmed.
        ConfDepth uint32

        // FetchClosedChannels provides access to a user's channels, such that
        // they can be marked fully closed after incubation has concluded.
        FetchClosedChannels func(pendingOnly bool) (
                []*channeldb.ChannelCloseSummary, error)

        // FetchClosedChannel provides access to the close summary to extract a
        // height hint from.
        FetchClosedChannel func(chanID *wire.OutPoint) (
                *channeldb.ChannelCloseSummary, error)

        // Notifier provides the utxo nursery the ability to subscribe to
        // transaction confirmation events, which advance outputs through their
        // persistence state transitions.
        Notifier chainntnfs.ChainNotifier

        // PublishTransaction facilitates the process of broadcasting a signed
        // transaction to the appropriate network.
        PublishTransaction func(*wire.MsgTx, string) error

        // Store provides access to and modification of the persistent state
        // maintained about the utxo nursery's incubating outputs.
        Store NurseryStorer

        // Sweep sweeps an input back to the wallet.
        SweepInput func(input.Input, sweep.Params) (chan sweep.Result, error)

        // Budget is the configured budget for the nursery.
        Budget *BudgetConfig
}

// UtxoNursery is a system dedicated to incubating time-locked outputs created
// by the broadcast of a commitment transaction either by us, or the remote
// peer. The nursery accepts outputs and "incubates" them until they've reached
// maturity, then sweep the outputs into the source wallet. An output is
// considered mature after the relative time-lock within the pkScript has
// passed. As outputs reach their maturity age, they're swept in batches into
// the source wallet, returning the outputs so they can be used within future
// channels, or regular Bitcoin transactions.
type UtxoNursery struct {
        started uint32 // To be used atomically.
        stopped uint32 // To be used atomically.

        cfg *NurseryConfig

        mu         sync.Mutex
        bestHeight uint32

        quit chan struct{}
        wg   sync.WaitGroup
}

// NewUtxoNursery creates a new instance of the UtxoNursery from a
// ChainNotifier and LightningWallet instance.
func NewUtxoNursery(cfg *NurseryConfig) *UtxoNursery {
        return &UtxoNursery{
                cfg:  cfg,
                quit: make(chan struct{}),
        }
}

// Start launches all goroutines the UtxoNursery needs to properly carry out
// its duties.
func (u *UtxoNursery) Start() error {
        if !atomic.CompareAndSwapUint32(&u.started, 0, 1) {
                return nil
        }

        utxnLog.Info("UTXO nursery starting")

        // Retrieve the currently best known block. This is needed to have the
        // state machine catch up with the blocks we missed when we were down.
        bestHash, bestHeight, err := u.cfg.ChainIO.GetBestBlock()
        if err != nil {
                return err
        }

        // Set best known height to schedule late registrations properly.
        atomic.StoreUint32(&u.bestHeight, uint32(bestHeight))

        // 2. Flush all fully-graduated channels from the pipeline.

        // Load any pending close channels, which represents the super set of
        // all channels that may still be incubating.
        pendingCloseChans, err := u.cfg.FetchClosedChannels(true)
        if err != nil {
                return err
        }

        // Ensure that all mature channels have been marked as fully closed in
        // the channeldb.
        for _, pendingClose := range pendingCloseChans {
                err := u.closeAndRemoveIfMature(&pendingClose.ChanPoint)
                if err != nil {
                        return err
                }
        }

        // TODO(conner): check if any fully closed channels can be removed from
        // utxn.

        // 2. Restart spend ntfns for any preschool outputs, which are waiting
        // for the force closed commitment txn to confirm, or any second-layer
        // HTLC success transactions.
        //
        // NOTE: The next two steps *may* spawn go routines, thus from this
        // point forward, we must close the nursery's quit channel if we detect
        // any failures during startup to ensure they terminate.
        if err := u.reloadPreschool(); err != nil {
                close(u.quit)
                return err
        }

        // 3. Replay all crib and kindergarten outputs up to the current best
        // height.
        if err := u.reloadClasses(uint32(bestHeight)); err != nil {
                close(u.quit)
                return err
        }

        // Start watching for new blocks, as this will drive the nursery store's
        // state machine.
        newBlockChan, err := u.cfg.Notifier.RegisterBlockEpochNtfn(&chainntnfs.BlockEpoch{
                Height: bestHeight,
                Hash:   bestHash,
        })
        if err != nil {
                close(u.quit)
                return err
        }

        u.wg.Add(1)
        go u.incubator(newBlockChan)

        return nil
}

// Stop gracefully shuts down any lingering goroutines launched during normal
// operation of the UtxoNursery.
func (u *UtxoNursery) Stop() error {
        if !atomic.CompareAndSwapUint32(&u.stopped, 0, 1) {
                return nil
        }

        utxnLog.Infof("UTXO nursery shutting down...")
        defer utxnLog.Debug("UTXO nursery shutdown complete")

        close(u.quit)
        u.wg.Wait()

        return nil
}

// IncubateOutputs sends a request to the UtxoNursery to incubate a set of
// outputs from an existing commitment transaction. Outputs need to incubate if
// they're CLTV absolute time locked, or if they're CSV relative time locked.
// Once all outputs reach maturity, they'll be swept back into the wallet.
func (u *UtxoNursery) IncubateOutputs(chanPoint wire.OutPoint,
        outgoingHtlc fn.Option[lnwallet.OutgoingHtlcResolution],
        incomingHtlc fn.Option[lnwallet.IncomingHtlcResolution],
        broadcastHeight uint32, deadlineHeight fn.Option[int32]) error {

        // Add to wait group because nursery might shut down during execution of
        // this function. Otherwise it could happen that nursery thinks it is
        // shut down, but in this function new goroutines were started and stay
        // around.
        u.wg.Add(1)
        defer u.wg.Done()

        // Check quit channel for the case where the waitgroup wait was finished
        // right before this function's add call was made.
        select {
        case <-u.quit:
                return fmt.Errorf("nursery shutting down")
        default:
        }

        var (
                // Kid outputs can be swept after an initial confirmation
                // followed by a maturity period.Baby outputs are two stage and
                // will need to wait for an absolute time out to reach a
                // confirmation, then require a relative confirmation delay.
                kidOutputs  = make([]kidOutput, 0)
                babyOutputs = make([]babyOutput, 0)
        )

        // 1. Build all the spendable outputs that we will try to incubate.

        // TODO(roasbeef): query and see if we already have, if so don't add?

        // For each incoming HTLC, we'll register a kid output marked as a
        // second-layer HTLC output. We effectively skip the baby stage (as the
        // timelock is zero), and enter the kid stage.
        incomingHtlc.WhenSome(func(htlcRes lnwallet.IncomingHtlcResolution) {
                // Based on the input pk script of the sign descriptor, we can
                // determine if this is a taproot output or not. This'll
                // determine the witness type we try to set below.
                isTaproot := txscript.IsPayToTaproot(
                        htlcRes.SweepSignDesc.Output.PkScript,
                )

                var witType input.StandardWitnessType
                if isTaproot {
                        witType = input.TaprootHtlcAcceptedSuccessSecondLevel
                } else {
                        witType = input.HtlcAcceptedSuccessSecondLevel
                }

                htlcOutput := makeKidOutput(
                        &htlcRes.ClaimOutpoint, &chanPoint, htlcRes.CsvDelay,
                        witType, &htlcRes.SweepSignDesc, 0, deadlineHeight,
                )

                if htlcOutput.Amount() > 0 {
                        kidOutputs = append(kidOutputs, htlcOutput)
                }
        })

        // For each outgoing HTLC, we'll create a baby output. If this is our
        // commitment transaction, then we'll broadcast a second-layer
        // transaction to transition to a kid output. Otherwise, we'll directly
        // spend once the CLTV delay us up.
        outgoingHtlc.WhenSome(func(htlcRes lnwallet.OutgoingHtlcResolution) {
                // If this HTLC is on our commitment transaction, then it'll be
                // a baby output as we need to go to the second level to sweep
                // it.
                if htlcRes.SignedTimeoutTx != nil {
                        htlcOutput := makeBabyOutput(
                                &chanPoint, &htlcRes, deadlineHeight,
                        )

                        if htlcOutput.Amount() > 0 {
                                babyOutputs = append(babyOutputs, htlcOutput)
                        }

                        return
                }

                // Based on the input pk script of the sign descriptor, we can
                // determine if this is a taproot output or not. This'll
                // determine the witness type we try to set below.
                isTaproot := txscript.IsPayToTaproot(
                        htlcRes.SweepSignDesc.Output.PkScript,
                )

                var witType input.StandardWitnessType
                if isTaproot {
                        witType = input.TaprootHtlcOfferedRemoteTimeout
                } else {
                        witType = input.HtlcOfferedRemoteTimeout
                }

                // Otherwise, this is actually a kid output as we can sweep it
                // once the commitment transaction confirms, and the absolute
                // CLTV lock has expired. We set the CSV delay what the
                // resolution encodes, since the sequence number must be set
                // accordingly.
                htlcOutput := makeKidOutput(
                        &htlcRes.ClaimOutpoint, &chanPoint, htlcRes.CsvDelay,
                        witType, &htlcRes.SweepSignDesc, htlcRes.Expiry,
                        deadlineHeight,
                )
                kidOutputs = append(kidOutputs, htlcOutput)
        })

        // TODO(roasbeef): if want to handle outgoing on remote commit
        //  * need ability to cancel in the case that we learn of pre-image or
        //    remote party pulls

        numHtlcs := len(babyOutputs) + len(kidOutputs)
        utxnLog.Infof("Incubating Channel(%s) num-htlcs=%d",
                chanPoint, numHtlcs)

        u.mu.Lock()
        defer u.mu.Unlock()

        // 2. Persist the outputs we intended to sweep in the nursery store
        if err := u.cfg.Store.Incubate(kidOutputs, babyOutputs); err != nil {
                utxnLog.Errorf("unable to begin incubation of Channel(%s): %v",
                        chanPoint, err)
                return err
        }

        // As an intermediate step, we'll now check to see if any of the baby
        // outputs has actually _already_ expired. This may be the case if
        // blocks were mined while we processed this message.
        _, bestHeight, err := u.cfg.ChainIO.GetBestBlock()
        if err != nil {
                return err
        }

        // We'll examine all the baby outputs just inserted into the database,
        // if the output has already expired, then we'll *immediately* sweep
        // it. This may happen if the caller raced a block to call this method.
        for i, babyOutput := range babyOutputs {
                if uint32(bestHeight) >= babyOutput.expiry {
                        err = u.sweepCribOutput(
                                babyOutput.expiry, &babyOutputs[i],
                        )
                        if err != nil {
                                return err
                        }
                }
        }

        // 3. If we are incubating any preschool outputs, register for a
        // confirmation notification that will transition it to the
        // kindergarten bucket.
        if len(kidOutputs) != 0 {
                for i := range kidOutputs {
                        err := u.registerPreschoolConf(
                                &kidOutputs[i], broadcastHeight,
                        )
                        if err != nil {
                                return err
                        }
                }
        }

        return nil
}

// NurseryReport attempts to return a nursery report stored for the target
// outpoint. A nursery report details the maturity/sweeping progress for a
// contract that was previously force closed. If a report entry for the target
// chanPoint is unable to be constructed, then an error will be returned.
func (u *UtxoNursery) NurseryReport(
        chanPoint *wire.OutPoint) (*ContractMaturityReport, error) {

        u.mu.Lock()
        defer u.mu.Unlock()

        utxnLog.Debugf("NurseryReport: building nursery report for channel %v",
                chanPoint)

        var report *ContractMaturityReport

        if err := u.cfg.Store.ForChanOutputs(chanPoint, func(k, v []byte) error {
                switch {
                case bytes.HasPrefix(k, cribPrefix):
                        // Cribs outputs are the only kind currently stored as
                        // baby outputs.
                        var baby babyOutput
                        err := baby.Decode(bytes.NewReader(v))
                        if err != nil {
                                return err
                        }

                        // Each crib output represents a stage one htlc, and
                        // will contribute towards the limbo balance.
                        report.AddLimboStage1TimeoutHtlc(&baby)

                case bytes.HasPrefix(k, psclPrefix),
                        bytes.HasPrefix(k, kndrPrefix),
                        bytes.HasPrefix(k, gradPrefix):

                        // All others states can be deserialized as kid outputs.
                        var kid kidOutput
                        err := kid.Decode(bytes.NewReader(v))
                        if err != nil {
                                return err
                        }

                        // Now, use the state prefixes to determine how the
                        // this output should be represented in the nursery
                        // report.  An output's funds are always in limbo until
                        // reaching the graduate state.
                        switch {
                        case bytes.HasPrefix(k, psclPrefix):
                                // Preschool outputs are awaiting the
                                // confirmation of the commitment transaction.
                                switch kid.WitnessType() {

                                //nolint:ll
                                case input.TaprootHtlcAcceptedSuccessSecondLevel:
                                        fallthrough
                                case input.HtlcAcceptedSuccessSecondLevel:
                                        // An HTLC output on our commitment
                                        // transaction where the second-layer
                                        // transaction hasn't
                                        // yet confirmed.
                                        report.AddLimboStage1SuccessHtlc(&kid)

                                case input.HtlcOfferedRemoteTimeout,
                                        input.TaprootHtlcOfferedRemoteTimeout:
                                        // This is an HTLC output on the
                                        // commitment transaction of the remote
                                        // party. We are waiting for the CLTV
                                        // timelock expire.
                                        report.AddLimboDirectHtlc(&kid)
                                }

                        case bytes.HasPrefix(k, kndrPrefix):
                                // Kindergarten outputs may originate from
                                // either the commitment transaction or an htlc.
                                // We can distinguish them via their witness
                                // types.
                                switch kid.WitnessType() {

                                case input.HtlcOfferedRemoteTimeout,
                                        input.TaprootHtlcOfferedRemoteTimeout:
                                        // This is an HTLC output on the
                                        // commitment transaction of the remote
                                        // party. The CLTV timelock has
                                        // expired, and we only need to sweep
                                        // it.
                                        report.AddLimboDirectHtlc(&kid)

                                //nolint:ll
                                case input.TaprootHtlcAcceptedSuccessSecondLevel:
                                        fallthrough
                                case input.TaprootHtlcOfferedTimeoutSecondLevel:
                                        fallthrough
                                case input.HtlcAcceptedSuccessSecondLevel:
                                        fallthrough
                                case input.HtlcOfferedTimeoutSecondLevel:
                                        // The htlc timeout or success
                                        // transaction has confirmed, and the
                                        // CSV delay has begun ticking.
                                        report.AddLimboStage2Htlc(&kid)
                                }

                        case bytes.HasPrefix(k, gradPrefix):
                                // Graduate outputs are those whose funds have
                                // been swept back into the wallet. Each output
                                // will contribute towards the recovered
                                // balance.
                                switch kid.WitnessType() {

                                //nolint:ll
                                case input.TaprootHtlcAcceptedSuccessSecondLevel:
                                        fallthrough
                                case input.TaprootHtlcOfferedTimeoutSecondLevel:
                                        fallthrough
                                case input.HtlcAcceptedSuccessSecondLevel:
                                        fallthrough
                                case input.HtlcOfferedTimeoutSecondLevel:
                                        fallthrough
                                case input.TaprootHtlcOfferedRemoteTimeout:
                                        fallthrough
                                case input.HtlcOfferedRemoteTimeout:
                                        // This htlc output successfully
                                        // resides in a p2wkh output belonging
                                        // to the user.
                                        report.AddRecoveredHtlc(&kid)
                                }
                        }

                default:
                }

                return nil
        }, func() {
                report = &ContractMaturityReport{}
        }); err != nil {
                return nil, err
        }

        return report, nil
}

// reloadPreschool re-initializes the chain notifier with all of the outputs
// that had been saved to the "preschool" database bucket prior to shutdown.
func (u *UtxoNursery) reloadPreschool() error {
        psclOutputs, err := u.cfg.Store.FetchPreschools()
        if err != nil {
                return err
        }

        // For each of the preschool outputs stored in the nursery store, load
        // its close summary from disk so that we can get an accurate height
        // hint from which to start our range for spend notifications.
        for i := range psclOutputs {
                kid := &psclOutputs[i]
                chanPoint := kid.OriginChanPoint()

                // Load the close summary for this output's channel point.
                closeSummary, err := u.cfg.FetchClosedChannel(chanPoint)
                if err == channeldb.ErrClosedChannelNotFound {
                        // This should never happen since the close summary
                        // should only be removed after the channel has been
                        // swept completely.
                        utxnLog.Warnf("Close summary not found for "+
                                "chan_point=%v, can't determine height hint"+
                                "to sweep commit txn", chanPoint)
                        continue

                } else if err != nil {
                        return err
                }

                // Use the close height from the channel summary as our height
                // hint to drive our spend notifications, with our confirmation
                // depth as a buffer for reorgs.
                heightHint := closeSummary.CloseHeight - u.cfg.ConfDepth
                err = u.registerPreschoolConf(kid, heightHint)
                if err != nil {
                        return err
                }
        }

        return nil
}

// reloadClasses reinitializes any height-dependent state transitions for which
// the utxonursery has not received confirmation, and replays the graduation of
// all kindergarten and crib outputs for all heights up to the current block.
// This allows the nursery to reinitialize all state to continue sweeping
// outputs, even in the event that we missed blocks while offline. reloadClasses
// is called during the startup of the UTXO Nursery.
func (u *UtxoNursery) reloadClasses(bestHeight uint32) error {
        // Loading all active heights up to and including the current block.
        activeHeights, err := u.cfg.Store.HeightsBelowOrEqual(
                uint32(bestHeight))
        if err != nil {
                return err
        }

        // Return early if nothing to sweep.
        if len(activeHeights) == 0 {
                return nil
        }

        utxnLog.Infof("(Re)-sweeping %d heights below height=%d",
                len(activeHeights), bestHeight)

        // Attempt to re-register notifications for any outputs still at these
        // heights.
        for _, classHeight := range activeHeights {
                utxnLog.Debugf("Attempting to sweep outputs at height=%v",
                        classHeight)

                if err = u.graduateClass(classHeight); err != nil {
                        utxnLog.Errorf("Failed to sweep outputs at "+
                                "height=%v: %v", classHeight, err)
                        return err
                }
        }

        utxnLog.Infof("UTXO Nursery is now fully synced")

        return nil
}

// incubator is tasked with driving all state transitions that are dependent on
// the current height of the blockchain. As new blocks arrive, the incubator
// will attempt spend outputs at the latest height. The asynchronous
// confirmation of these spends will either 1) move a crib output into the
// kindergarten bucket or 2) move a kindergarten output into the graduated
// bucket.
func (u *UtxoNursery) incubator(newBlockChan *chainntnfs.BlockEpochEvent) {
        defer u.wg.Done()
        defer newBlockChan.Cancel()

        for {
                select {
                case epoch, ok := <-newBlockChan.Epochs:
                        // If the epoch channel has been closed, then the
                        // ChainNotifier is exiting which means the daemon is
                        // as well. Therefore, we exit early also in order to
                        // ensure the daemon shuts down gracefully, yet
                        // swiftly.
                        if !ok {
                                return
                        }

                        // TODO(roasbeef): if the BlockChainIO is rescanning
                        // will give stale data

                        // A new block has just been connected to the main
                        // chain, which means we might be able to graduate crib
                        // or kindergarten outputs at this height. This involves
                        // broadcasting any presigned htlc timeout txns, as well
                        // as signing and broadcasting a sweep txn that spends
                        // from all kindergarten outputs at this height.
                        height := uint32(epoch.Height)

                        // Update best known block height for late registrations
                        // to be scheduled properly.
                        atomic.StoreUint32(&u.bestHeight, height)

                        if err := u.graduateClass(height); err != nil {
                                utxnLog.Errorf("error while graduating "+
                                        "class at height=%d: %v", height, err)

                                // TODO(conner): signal fatal error to daemon
                        }

                case <-u.quit:
                        return
                }
        }
}

// graduateClass handles the steps involved in spending outputs whose CSV or
// CLTV delay expires at the nursery's current height. This method is called
// each time a new block arrives, or during startup to catch up on heights we
// may have missed while the nursery was offline.
func (u *UtxoNursery) graduateClass(classHeight uint32) error {
        // Record this height as the nursery's current best height.
        u.mu.Lock()
        defer u.mu.Unlock()

        // Fetch all information about the crib and kindergarten outputs at
        // this height.
        kgtnOutputs, cribOutputs, err := u.cfg.Store.FetchClass(
                classHeight,
        )
        if err != nil {
                return err
        }

        utxnLog.Debugf("Attempting to graduate height=%v: num_kids=%v, "+
                "num_babies=%v", classHeight, len(kgtnOutputs), len(cribOutputs))

        // Offer the outputs to the sweeper and set up notifications that will
        // transition the swept kindergarten outputs and cltvCrib into graduated
        // outputs.
        if len(kgtnOutputs) > 0 {
                if err := u.sweepMatureOutputs(classHeight, kgtnOutputs); err != nil {
                        utxnLog.Errorf("Failed to sweep %d kindergarten "+
                                "outputs at height=%d: %v",
                                len(kgtnOutputs), classHeight, err)
                        return err
                }
        }

        // Now, we broadcast all pre-signed htlc txns from the csv crib outputs
        // at this height.
        for i := range cribOutputs {
                err := u.sweepCribOutput(classHeight, &cribOutputs[i])
                if err != nil {
                        utxnLog.Errorf("Failed to sweep first-stage HTLC "+
                                "(CLTV-delayed) output %v",
                                cribOutputs[i].OutPoint())
                        return err
                }
        }

        return nil
}

// decideDeadlineAndBudget returns the deadline and budget for a given output.
func (u *UtxoNursery) decideDeadlineAndBudget(k kidOutput) (fn.Option[int32],
        btcutil.Amount) {

        // Assume this is a to_local output and use a None deadline.
        deadline := fn.None[int32]()

        // Exit early if this is not HTLC.
        if !k.isHtlc {
                budget := calculateBudget(
                        k.amt, u.cfg.Budget.ToLocalRatio, u.cfg.Budget.ToLocal,
                )

                return deadline, budget
        }

        // Otherwise it's the first-level HTLC output, we'll use the
        // time-sensitive settings for it.
        budget := calculateBudget(
                k.amt, u.cfg.Budget.DeadlineHTLCRatio,
                u.cfg.Budget.DeadlineHTLC,
        )

        return k.deadlineHeight, budget
}

// sweepMatureOutputs generates and broadcasts the transaction that transfers
// control of funds from a prior channel commitment transaction to the user's
// wallet. The outputs swept were previously time locked (either absolute or
// relative), but are not mature enough to sweep into the wallet.
func (u *UtxoNursery) sweepMatureOutputs(classHeight uint32,
        kgtnOutputs []kidOutput) error {

        utxnLog.Infof("Sweeping %v CSV-delayed outputs with sweep tx for "+
                "height %v", len(kgtnOutputs), classHeight)

        for _, output := range kgtnOutputs {
                // Create local copy to prevent pointer to loop variable to be
                // passed in with disastrous consequences.
                local := output

                // Calculate the deadline height and budget for this output.
                deadline, budget := u.decideDeadlineAndBudget(local)

                resultChan, err := u.cfg.SweepInput(&local, sweep.Params{
                        DeadlineHeight: deadline,
                        Budget:         budget,
                })
                if err != nil {
                        return err
                }
                u.wg.Add(1)
                go u.waitForSweepConf(classHeight, &local, resultChan)
        }

        return nil
}

// waitForSweepConf watches for the confirmation of a sweep transaction
// containing a batch of kindergarten outputs. Once confirmation has been
// received, the nursery will mark those outputs as fully graduated, and proceed
// to mark any mature channels as fully closed in channeldb.
// NOTE(conner): this method MUST be called as a go routine.
func (u *UtxoNursery) waitForSweepConf(classHeight uint32,
        output *kidOutput, resultChan chan sweep.Result) {

        defer u.wg.Done()

        select {
        case result, ok := <-resultChan:
                if !ok {
                        utxnLog.Errorf("Notification chan closed, can't" +
                                " advance graduating output")
                        return
                }

                // In case of a remote spend, still graduate the output. There
                // is no way to sweep it anymore.
                if result.Err == sweep.ErrRemoteSpend {
                        utxnLog.Infof("Output %v was spend by remote party",
                                output.OutPoint())
                        break
                }

                if result.Err != nil {
                        utxnLog.Errorf("Failed to sweep %v at "+
                                "height=%d", output.OutPoint(),
                                classHeight)
                        return
                }

        case <-u.quit:
                return
        }

        u.mu.Lock()
        defer u.mu.Unlock()

        // TODO(conner): add retry utxnLogic?

        // Mark the confirmed kindergarten output as graduated.
        if err := u.cfg.Store.GraduateKinder(classHeight, output); err != nil {
                utxnLog.Errorf("Unable to graduate kindergarten output %v: %v",
                        output.OutPoint(), err)
                return
        }

        utxnLog.Infof("Graduated kindergarten output from height=%d",
                classHeight)

        // Attempt to close the channel, only doing so if all of the channel's
        // outputs have been graduated.
        chanPoint := output.OriginChanPoint()
        if err := u.closeAndRemoveIfMature(chanPoint); err != nil {
                utxnLog.Errorf("Failed to close and remove channel %v",
                        *chanPoint)
                return
        }
}

// sweepCribOutput broadcasts the crib output's htlc timeout txn, and sets up a
// notification that will advance it to the kindergarten bucket upon
// confirmation.
func (u *UtxoNursery) sweepCribOutput(classHeight uint32, baby *babyOutput) error {
        utxnLog.Infof("Publishing CLTV-delayed HTLC output using timeout tx "+
                "(txid=%v): %v", baby.timeoutTx.TxHash(),
                lnutils.SpewLogClosure(baby.timeoutTx))

        // We'll now broadcast the HTLC transaction, then wait for it to be
        // confirmed before transitioning it to kindergarten.
        label := labels.MakeLabel(labels.LabelTypeSweepTransaction, nil)
        err := u.cfg.PublishTransaction(baby.timeoutTx, label)

        // In case the tx does not meet mempool fee requirements we continue
        // because the tx is rebroadcasted in the background and there is
        // nothing we can do to bump this transaction anyways.
        if err != nil && !errors.Is(err, lnwallet.ErrDoubleSpend) &&
                !errors.Is(err, lnwallet.ErrMempoolFee) {

                utxnLog.Errorf("Unable to broadcast baby tx: "+
                        "%v, %v", err, spew.Sdump(baby.timeoutTx))
                return err
        }

        return u.registerTimeoutConf(baby, classHeight)
}

// registerTimeoutConf is responsible for subscribing to confirmation
// notification for an htlc timeout transaction. If successful, a goroutine
// will be spawned that will transition the provided baby output into the
// kindergarten state within the nursery store.
func (u *UtxoNursery) registerTimeoutConf(baby *babyOutput,
        heightHint uint32) error {

        birthTxID := baby.timeoutTx.TxHash()

        // Register for the confirmation of presigned htlc txn.
        confChan, err := u.cfg.Notifier.RegisterConfirmationsNtfn(
                &birthTxID, baby.timeoutTx.TxOut[0].PkScript, u.cfg.ConfDepth,
                heightHint,
        )
        if err != nil {
                return err
        }

        utxnLog.Infof("Htlc output %v registered for promotion "+
                "notification.", baby.OutPoint())

        u.wg.Add(1)
        go u.waitForTimeoutConf(baby, confChan)

        return nil
}

// waitForTimeoutConf watches for the confirmation of an htlc timeout
// transaction, and attempts to move the htlc output from the crib bucket to the
// kindergarten bucket upon success.
func (u *UtxoNursery) waitForTimeoutConf(baby *babyOutput,
        confChan *chainntnfs.ConfirmationEvent) {

        defer u.wg.Done()

        select {
        case txConfirmation, ok := <-confChan.Confirmed:
                if !ok {
                        utxnLog.Debugf("Notification chan "+
                                "closed, can't advance baby output %v",
                                baby.OutPoint())
                        return
                }

                baby.SetConfHeight(txConfirmation.BlockHeight)

        case <-u.quit:
                return
        }

        u.mu.Lock()
        defer u.mu.Unlock()

        // TODO(conner): add retry utxnLogic?

        err := u.cfg.Store.CribToKinder(baby)
        if err != nil {
                utxnLog.Errorf("Unable to move htlc output from "+
                        "crib to kindergarten bucket: %v", err)
                return
        }

        utxnLog.Infof("Htlc output %v promoted to "+
                "kindergarten", baby.OutPoint())
}

// registerPreschoolConf is responsible for subscribing to the confirmation of
// a commitment transaction, or an htlc success transaction for an incoming
// HTLC on our commitment transaction.. If successful, the provided preschool
// output will be moved persistently into the kindergarten state within the
// nursery store.
func (u *UtxoNursery) registerPreschoolConf(kid *kidOutput, heightHint uint32) error {
        txID := kid.OutPoint().Hash

        // TODO(roasbeef): ensure we don't already have one waiting, need to
        // de-duplicate
        //  * need to do above?

        pkScript := kid.signDesc.Output.PkScript
        confChan, err := u.cfg.Notifier.RegisterConfirmationsNtfn(
                &txID, pkScript, u.cfg.ConfDepth, heightHint,
        )
        if err != nil {
                return err
        }

        var outputType string
        if kid.isHtlc {
                outputType = "HTLC"
        } else {
                outputType = "Commitment"
        }

        utxnLog.Infof("%v outpoint %v registered for "+
                "confirmation notification.", outputType, kid.OutPoint())

        u.wg.Add(1)
        go u.waitForPreschoolConf(kid, confChan)

        return nil
}

// waitForPreschoolConf is intended to be run as a goroutine that will wait until
// a channel force close commitment transaction, or a second layer HTLC success
// transaction has been included in a confirmed block. Once the transaction has
// been confirmed (as reported by the Chain Notifier), waitForPreschoolConf
// will delete the output from the "preschool" database bucket and atomically
// add it to the "kindergarten" database bucket.  This is the second step in
// the output incubation process.
func (u *UtxoNursery) waitForPreschoolConf(kid *kidOutput,
        confChan *chainntnfs.ConfirmationEvent) {

        defer u.wg.Done()

        select {
        case txConfirmation, ok := <-confChan.Confirmed:
                if !ok {
                        utxnLog.Errorf("Notification chan "+
                                "closed, can't advance output %v",
                                kid.OutPoint())
                        return
                }

                kid.SetConfHeight(txConfirmation.BlockHeight)

        case <-u.quit:
                return
        }

        u.mu.Lock()
        defer u.mu.Unlock()

        // TODO(conner): add retry utxnLogic?

        var outputType string
        if kid.isHtlc {
                outputType = "HTLC"
        } else {
                outputType = "Commitment"
        }

        bestHeight := atomic.LoadUint32(&u.bestHeight)
        err := u.cfg.Store.PreschoolToKinder(kid, bestHeight)
        if err != nil {
                utxnLog.Errorf("Unable to move %v output "+
                        "from preschool to kindergarten bucket: %v",
                        outputType, err)
                return
        }
}

// RemoveChannel channel erases all entries from the channel bucket for the
// provided channel point.
func (u *UtxoNursery) RemoveChannel(op *wire.OutPoint) error {
        return u.cfg.Store.RemoveChannel(op)
}

// ContractMaturityReport is a report that details the maturity progress of a
// particular force closed contract.
type ContractMaturityReport struct {
        // limboBalance is the total number of frozen coins within this
        // contract.
        LimboBalance btcutil.Amount

        // recoveredBalance is the total value that has been successfully swept
        // back to the user's wallet.
        RecoveredBalance btcutil.Amount

        // htlcs records a maturity report for each htlc output in this channel.
        Htlcs []HtlcMaturityReport
}

// HtlcMaturityReport provides a summary of a single htlc output, and is
// embedded as party of the overarching ContractMaturityReport.
type HtlcMaturityReport struct {
        // Outpoint is the final output that will be swept back to the wallet.
        Outpoint wire.OutPoint

        // Amount is the final value that will be swept in back to the wallet.
        Amount btcutil.Amount

        // MaturityHeight is the absolute block height that this output will
        // mature at.
        MaturityHeight uint32

        // Stage indicates whether the htlc is in the CLTV-timeout stage (1) or
        // the CSV-delay stage (2). A stage 1 htlc's maturity height will be set
        // to its expiry height, while a stage 2 htlc's maturity height will be
        // set to its confirmation height plus the maturity requirement.
        Stage uint32
}

// AddLimboStage1TimeoutHtlc adds an htlc crib output to the maturity report's
// htlcs, and contributes its amount to the limbo balance.
func (c *ContractMaturityReport) AddLimboStage1TimeoutHtlc(baby *babyOutput) {
        c.LimboBalance += baby.Amount()

        // TODO(roasbeef): bool to indicate stage 1 vs stage 2?
        c.Htlcs = append(c.Htlcs, HtlcMaturityReport{
                Outpoint:       baby.OutPoint(),
                Amount:         baby.Amount(),
                MaturityHeight: baby.expiry,
                Stage:          1,
        })
}

// AddLimboDirectHtlc adds a direct HTLC on the commitment transaction of the
// remote party to the maturity report. This a CLTV time-locked output that
// has or hasn't expired yet.
func (c *ContractMaturityReport) AddLimboDirectHtlc(kid *kidOutput) {
        c.LimboBalance += kid.Amount()

        htlcReport := HtlcMaturityReport{
                Outpoint:       kid.OutPoint(),
                Amount:         kid.Amount(),
                MaturityHeight: kid.absoluteMaturity,
                Stage:          2,
        }

        c.Htlcs = append(c.Htlcs, htlcReport)
}

// AddLimboStage1SuccessHtlcHtlc adds an htlc crib output to the maturity
// report's set of HTLC's. We'll use this to report any incoming HTLC sweeps
// where the second level transaction hasn't yet confirmed.
func (c *ContractMaturityReport) AddLimboStage1SuccessHtlc(kid *kidOutput) {
        c.LimboBalance += kid.Amount()

        c.Htlcs = append(c.Htlcs, HtlcMaturityReport{
                Outpoint: kid.OutPoint(),
                Amount:   kid.Amount(),
                Stage:    1,
        })
}

// AddLimboStage2Htlc adds an htlc kindergarten output to the maturity report's
// htlcs, and contributes its amount to the limbo balance.
func (c *ContractMaturityReport) AddLimboStage2Htlc(kid *kidOutput) {
        c.LimboBalance += kid.Amount()

        htlcReport := HtlcMaturityReport{
                Outpoint: kid.OutPoint(),
                Amount:   kid.Amount(),
                Stage:    2,
        }

        // If the confirmation height is set, then this means the first stage
        // has been confirmed, and we know the final maturity height of the CSV
        // delay.
        if kid.ConfHeight() != 0 {
                htlcReport.MaturityHeight = kid.ConfHeight() + kid.BlocksToMaturity()
        }

        c.Htlcs = append(c.Htlcs, htlcReport)
}

// AddRecoveredHtlc adds a graduate output to the maturity report's htlcs, and
// contributes its amount to the recovered balance.
func (c *ContractMaturityReport) AddRecoveredHtlc(kid *kidOutput) {
        c.RecoveredBalance += kid.Amount()

        c.Htlcs = append(c.Htlcs, HtlcMaturityReport{
                Outpoint:       kid.OutPoint(),
                Amount:         kid.Amount(),
                MaturityHeight: kid.ConfHeight() + kid.BlocksToMaturity(),
        })
}

// closeAndRemoveIfMature removes a particular channel from the channel index
// if and only if all of its outputs have been marked graduated. If the channel
// still has ungraduated outputs, the method will succeed without altering the
// database state.
func (u *UtxoNursery) closeAndRemoveIfMature(chanPoint *wire.OutPoint) error {
        isMature, err := u.cfg.Store.IsMatureChannel(chanPoint)
        if err == ErrContractNotFound {
                return nil
        } else if err != nil {
                utxnLog.Errorf("Unable to determine maturity of "+
                        "channel=%s", chanPoint)
                return err
        }

        // Nothing to do if we are still incubating.
        if !isMature {
                return nil
        }

        // Now that the channel is fully closed, we remove the channel from the
        // nursery store here. This preserves the invariant that we never remove
        // a channel unless it is mature, as this is the only place the utxo
        // nursery removes a channel.
        if err := u.cfg.Store.RemoveChannel(chanPoint); err != nil {
                utxnLog.Errorf("Unable to remove channel=%s from "+
                        "nursery store: %v", chanPoint, err)
                return err
        }

        utxnLog.Infof("Removed channel %v from nursery store", chanPoint)

        return nil
}

// babyOutput represents a two-stage CSV locked output, and is used to track
// htlc outputs through incubation. The first stage requires broadcasting a
// presigned timeout txn that spends from the CLTV locked output on the
// commitment txn. A babyOutput is treated as a subset of CsvSpendableOutputs,
// with the additional constraint that a transaction must be broadcast before
// it can be spent. Each baby transaction embeds the kidOutput that can later
// be used to spend the CSV output contained in the timeout txn.
//
// TODO(roasbeef): re-rename to timeout tx
//   - create CltvCsvSpendableOutput
type babyOutput struct {
        // expiry is the absolute block height at which the secondLevelTx
        // should be broadcast to the network.
        //
        // NOTE: This value will be zero if this is a baby output for a prior
        // incoming HTLC.
        expiry uint32

        // timeoutTx is a fully-signed transaction that, upon confirmation,
        // transitions the htlc into the delay+claim stage.
        timeoutTx *wire.MsgTx

        // kidOutput represents the CSV output to be swept from the
        // secondLevelTx after it has been broadcast and confirmed.
        kidOutput
}

// makeBabyOutput constructs a baby output that wraps a future kidOutput. The
// provided sign descriptors and witness types will be used once the output
// reaches the delay and claim stage.
func makeBabyOutput(chanPoint *wire.OutPoint,
        htlcResolution *lnwallet.OutgoingHtlcResolution,
        deadlineHeight fn.Option[int32]) babyOutput {

        htlcOutpoint := htlcResolution.ClaimOutpoint
        blocksToMaturity := htlcResolution.CsvDelay

        isTaproot := txscript.IsPayToTaproot(
                htlcResolution.SweepSignDesc.Output.PkScript,
        )

        var witnessType input.StandardWitnessType
        if isTaproot {
                witnessType = input.TaprootHtlcOfferedTimeoutSecondLevel
        } else {
                witnessType = input.HtlcOfferedTimeoutSecondLevel
        }

        kid := makeKidOutput(
                &htlcOutpoint, chanPoint, blocksToMaturity, witnessType,
                &htlcResolution.SweepSignDesc, 0, deadlineHeight,
        )

        return babyOutput{
                kidOutput: kid,
                expiry:    htlcResolution.Expiry,
                timeoutTx: htlcResolution.SignedTimeoutTx,
        }
}

// Encode writes the baby output to the given io.Writer.
func (bo *babyOutput) Encode(w io.Writer) error {
        var scratch [4]byte
        byteOrder.PutUint32(scratch[:], bo.expiry)
        if _, err := w.Write(scratch[:]); err != nil {
                return err
        }

        if err := bo.timeoutTx.Serialize(w); err != nil {
                return err
        }

        return bo.kidOutput.Encode(w)
}

// Decode reconstructs a baby output using the provided io.Reader.
func (bo *babyOutput) Decode(r io.Reader) error {
        var scratch [4]byte
        if _, err := r.Read(scratch[:]); err != nil {
                return err
        }
        bo.expiry = byteOrder.Uint32(scratch[:])

        bo.timeoutTx = new(wire.MsgTx)
        if err := bo.timeoutTx.Deserialize(r); err != nil {
                return err
        }

        return bo.kidOutput.Decode(r)
}

// kidOutput represents an output that's waiting for a required blockheight
// before its funds will be available to be moved into the user's wallet.  The
// struct includes a WitnessGenerator closure which will be used to generate
// the witness required to sweep the output once it's mature.
//
// TODO(roasbeef): rename to immatureOutput?
type kidOutput struct {
        breachedOutput

        originChanPoint wire.OutPoint

        // isHtlc denotes if this kid output is an HTLC output or not. This
        // value will be used to determine how to report this output within the
        // nursery report.
        isHtlc bool

        // blocksToMaturity is the relative CSV delay required after initial
        // confirmation of the commitment transaction before we can sweep this
        // output.
        //
        // NOTE: This will be set for: commitment outputs, and incoming HTLC's.
        // Otherwise, this will be zero. It will also be non-zero for
        // commitment types which requires confirmed spends.
        blocksToMaturity uint32

        // absoluteMaturity is the absolute height that this output will be
        // mature at. In order to sweep the output after this height, the
        // locktime of sweep transaction will need to be set to this value.
        //
        // NOTE: This will only be set for: outgoing HTLC's on the commitment
        // transaction of the remote party.
        absoluteMaturity uint32

        // deadlineHeight is the absolute height that this output should be
        // confirmed at. For an incoming HTLC, this is the CLTV expiry height.
        // For outgoing HTLC, this is its corresponding incoming HTLC's CLTV
        // expiry height.
        deadlineHeight fn.Option[int32]
}

func makeKidOutput(outpoint, originChanPoint *wire.OutPoint,
        blocksToMaturity uint32, witnessType input.StandardWitnessType,
        signDescriptor *input.SignDescriptor, absoluteMaturity uint32,
        deadlineHeight fn.Option[int32]) kidOutput {

        // This is an HTLC either if it's an incoming HTLC on our commitment
        // transaction, or is an outgoing HTLC on the commitment transaction of
        // the remote peer.
        isHtlc := (witnessType == input.HtlcAcceptedSuccessSecondLevel ||
                witnessType == input.TaprootHtlcAcceptedSuccessSecondLevel ||
                witnessType == input.TaprootHtlcOfferedRemoteTimeout ||
                witnessType == input.HtlcOfferedRemoteTimeout)

        // heightHint can be safely set to zero here, because after this
        // function returns, nursery will set a proper confirmation height in
        // waitForTimeoutConf or waitForPreschoolConf.
        heightHint := uint32(0)

        return kidOutput{
                breachedOutput: makeBreachedOutput(
                        outpoint, witnessType, nil, signDescriptor, heightHint,
                        fn.None[tlv.Blob](),
                ),
                isHtlc:           isHtlc,
                originChanPoint:  *originChanPoint,
                blocksToMaturity: blocksToMaturity,
                absoluteMaturity: absoluteMaturity,
                deadlineHeight:   deadlineHeight,
        }
}

func (k *kidOutput) OriginChanPoint() *wire.OutPoint {
        return &k.originChanPoint
}

func (k *kidOutput) BlocksToMaturity() uint32 {
        return k.blocksToMaturity
}

func (k *kidOutput) SetConfHeight(height uint32) {
        k.confHeight = height
}

func (k *kidOutput) ConfHeight() uint32 {
        return k.confHeight
}

func (k *kidOutput) RequiredLockTime() (uint32, bool) {
        return k.absoluteMaturity, k.absoluteMaturity > 0
}

// Encode converts a KidOutput struct into a form suitable for on-disk database
// storage. Note that the signDescriptor struct field is included so that the
// output's witness can be generated by createSweepTx() when the output becomes
// spendable.
func (k *kidOutput) Encode(w io.Writer) error {
        var scratch [8]byte
        byteOrder.PutUint64(scratch[:], uint64(k.Amount()))
        if _, err := w.Write(scratch[:]); err != nil {
                return err
        }

        op := k.OutPoint()
        if err := graphdb.WriteOutpoint(w, &op); err != nil {
                return err
        }
        if err := graphdb.WriteOutpoint(w, k.OriginChanPoint()); err != nil {
                return err
        }

        if err := binary.Write(w, byteOrder, k.isHtlc); err != nil {
                return err
        }

        byteOrder.PutUint32(scratch[:4], k.BlocksToMaturity())
        if _, err := w.Write(scratch[:4]); err != nil {
                return err
        }

        byteOrder.PutUint32(scratch[:4], k.absoluteMaturity)
        if _, err := w.Write(scratch[:4]); err != nil {
                return err
        }

        byteOrder.PutUint32(scratch[:4], k.ConfHeight())
        if _, err := w.Write(scratch[:4]); err != nil {
                return err
        }

        byteOrder.PutUint16(scratch[:2], uint16(k.witnessType))
        if _, err := w.Write(scratch[:2]); err != nil {
                return err
        }

        if err := input.WriteSignDescriptor(w, k.SignDesc()); err != nil {
                return err
        }

        if k.SignDesc().ControlBlock == nil {
                return nil
        }

        // If this is a taproot output, then it'll also have a control block,
        // so we'll go ahead and write that now.
        return wire.WriteVarBytes(w, 1000, k.SignDesc().ControlBlock)
}

// Decode takes a byte array representation of a kidOutput and converts it to an
// struct. Note that the witnessFunc method isn't added during deserialization
// and must be added later based on the value of the witnessType field.
func (k *kidOutput) Decode(r io.Reader) error {
        var scratch [8]byte

        if _, err := r.Read(scratch[:]); err != nil {
                return err
        }
        k.amt = btcutil.Amount(byteOrder.Uint64(scratch[:]))

        err := graphdb.ReadOutpoint(io.LimitReader(r, 40), &k.outpoint)
        if err != nil {
                return err
        }

        err = graphdb.ReadOutpoint(io.LimitReader(r, 40), &k.originChanPoint)
        if err != nil {
                return err
        }

        if err := binary.Read(r, byteOrder, &k.isHtlc); err != nil {
                return err
        }

        if _, err := r.Read(scratch[:4]); err != nil {
                return err
        }
        k.blocksToMaturity = byteOrder.Uint32(scratch[:4])

        if _, err := r.Read(scratch[:4]); err != nil {
                return err
        }
        k.absoluteMaturity = byteOrder.Uint32(scratch[:4])

        if _, err := r.Read(scratch[:4]); err != nil {
                return err
        }
        k.confHeight = byteOrder.Uint32(scratch[:4])

        if _, err := r.Read(scratch[:2]); err != nil {
                return err
        }
        k.witnessType = input.StandardWitnessType(byteOrder.Uint16(scratch[:2]))

        if err := input.ReadSignDescriptor(r, &k.signDesc); err != nil {
                return err
        }

        // If there's anything left in the reader, then this is a taproot
        // output that also wrote a control block.
        ctrlBlock, err := wire.ReadVarBytes(r, 0, 1000, "control block")
        switch {
        // If there're no bytes remaining, then we'll return early.
        case errors.Is(err, io.EOF):
                fallthrough
        case errors.Is(err, io.ErrUnexpectedEOF):
                return nil

        case err != nil:
                return err
        }

        k.signDesc.ControlBlock = ctrlBlock

        return nil
}

// Compile-time constraint to ensure kidOutput implements the
// Input interface.

var _ input.Input = (*kidOutput)(nil)

lightningnetwork / lnd / 13536249039

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous