13566028875

Committed 27 Feb 2025 12:09PM UTC coverage: 49.396% (-9.4%) from 58.748%

Build # 13566028875

Build Type

Pull #9555

github

Committed by

ellemouton

Commit Message

graph/db: populate the graph cache in Start instead of during construction

In this commit, we move the graph cache population logic out of the
ChannelGraph constructor and into its Start method instead.

Pull Request Pull Request #9555: graph: extract cache from CRUD [6]

Run Details

34 of 54 new or added lines in 4 files covered. (62.96%)

27464 existing lines in 436 files now uncovered.

101095 of 204664 relevant lines covered (49.4%)

1.54 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

0.0

/lnwire/update_fee.go

package lnwire

import (
        "bytes"
        "io"
)

// UpdateFee is the message the channel initiator sends to the other peer if
// the channel commitment fee needs to be updated.
type UpdateFee struct {
        // ChanID is the channel that this UpdateFee is meant for.
        ChanID ChannelID

        // FeePerKw is the fee-per-kw on commit transactions that the sender of
        // this message wants to use for this channel.
        //
        // TODO(halseth): make SatPerKWeight when fee estimation is moved to
        // own package. Currently this will cause an import cycle.
        FeePerKw uint32

        // ExtraData is the set of data that was appended to this message to
        // fill out the full maximum transport message size. These fields can
        // be used to specify optional data such as custom TLV fields.
        ExtraData ExtraOpaqueData
}

// NewUpdateFee creates a new UpdateFee message.
func NewUpdateFee(chanID ChannelID, feePerKw uint32) *UpdateFee {
        return &UpdateFee{
                ChanID:   chanID,
                FeePerKw: feePerKw,
        }
}

// A compile time check to ensure UpdateFee implements the lnwire.Message
// interface.
var _ Message = (*UpdateFee)(nil)

// Decode deserializes a serialized UpdateFee message stored in the passed
// io.Reader observing the specified protocol version.
//
// This is part of the lnwire.Message interface.
func (c *UpdateFee) Decode(r io.Reader, pver uint32) error {
        return ReadElements(r,
                &c.ChanID,
                &c.FeePerKw,
                &c.ExtraData,
        )
}

// Encode serializes the target UpdateFee into the passed io.Writer
// observing the protocol version specified.
//
// This is part of the lnwire.Message interface.
func (c *UpdateFee) Encode(w *bytes.Buffer, pver uint32) error {
        if err := WriteChannelID(w, c.ChanID); err != nil {
                return err
        }

        if err := WriteUint32(w, c.FeePerKw); err != nil {
                return err
        }

        return WriteBytes(w, c.ExtraData)
}

// MsgType returns the integer uniquely identifying this message type on the
// wire.
//
// This is part of the lnwire.Message interface.
func (c *UpdateFee) MsgType() MessageType {
        return MsgUpdateFee
}

// TargetChanID returns the channel id of the link for which this message is
// intended.
//
// NOTE: Part of peer.LinkUpdater interface.
func (c *UpdateFee) TargetChanID() ChannelID {
        return c.ChanID
}

1	package lnwire
2
3	import (
4	"bytes"
5	"io"
6	)
7
8	// UpdateFee is the message the channel initiator sends to the other peer if
9	// the channel commitment fee needs to be updated.
10	type UpdateFee struct {
11	// ChanID is the channel that this UpdateFee is meant for.
12	ChanID ChannelID
13
14	// FeePerKw is the fee-per-kw on commit transactions that the sender of
15	// this message wants to use for this channel.
16	//
17	// TODO(halseth): make SatPerKWeight when fee estimation is moved to
18	// own package. Currently this will cause an import cycle.
19	FeePerKw uint32
20
21	// ExtraData is the set of data that was appended to this message to
22	// fill out the full maximum transport message size. These fields can
23	// be used to specify optional data such as custom TLV fields.
24	ExtraData ExtraOpaqueData
25	}
26
27	// NewUpdateFee creates a new UpdateFee message.
UNCOV 28	func NewUpdateFee(chanID ChannelID, feePerKw uint32) *UpdateFee {	×
UNCOV 29	return &UpdateFee{	×
UNCOV 30	ChanID: chanID,	×
UNCOV 31	FeePerKw: feePerKw,	×
UNCOV 32	}	×
UNCOV 33	}	×
34
35	// A compile time check to ensure UpdateFee implements the lnwire.Message
36	// interface.
37	var _ Message = (*UpdateFee)(nil)
38
39	// Decode deserializes a serialized UpdateFee message stored in the passed
40	// io.Reader observing the specified protocol version.
41	//
42	// This is part of the lnwire.Message interface.
UNCOV 43	func (c *UpdateFee) Decode(r io.Reader, pver uint32) error {	×
UNCOV 44	return ReadElements(r,	×
UNCOV 45	&c.ChanID,	×
UNCOV 46	&c.FeePerKw,	×
UNCOV 47	&c.ExtraData,	×
UNCOV 48	)	×
UNCOV 49	}	×
50
51	// Encode serializes the target UpdateFee into the passed io.Writer
52	// observing the protocol version specified.
53	//
54	// This is part of the lnwire.Message interface.
UNCOV 55	func (c UpdateFee) Encode(w bytes.Buffer, pver uint32) error {	×
UNCOV 56	if err := WriteChannelID(w, c.ChanID); err != nil {	×
57	return err	×
58	}	×
59
UNCOV 60	if err := WriteUint32(w, c.FeePerKw); err != nil {	×
61	return err	×
62	}	×
63
UNCOV 64	return WriteBytes(w, c.ExtraData)	×
65	}
66
67	// MsgType returns the integer uniquely identifying this message type on the
68	// wire.
69	//
70	// This is part of the lnwire.Message interface.
UNCOV 71	func (c *UpdateFee) MsgType() MessageType {	×
UNCOV 72	return MsgUpdateFee	×
UNCOV 73	}	×
74
75	// TargetChanID returns the channel id of the link for which this message is
76	// intended.
77	//
78	// NOTE: Part of peer.LinkUpdater interface.
79	func (c *UpdateFee) TargetChanID() ChannelID {	×
80	return c.ChanID	×
81	}	×

lightningnetwork / lnd / 13566028875

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous