16569502135

Committed 28 Jul 2025 12:50PM UTC coverage: 67.251% (+0.02%) from 67.227%

Build # 16569502135

Build Type

Pull #9455

github

Committed by

web-flow

Commit Message

Merge b3899c4fd into 2e36f9b8b

Pull Request Pull Request #9455: discovery+lnwire: add support for DNS host name in NodeAnnouncement msg

Run Details

179 of 208 new or added lines in 6 files covered. (86.06%)

105 existing lines in 23 files now uncovered.

135676 of 201746 relevant lines covered (67.25%)

21711.59 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

76.97

/htlcswitch/link.go

package htlcswitch

import (
        "bytes"
        "context"
        crand "crypto/rand"
        "crypto/sha256"
        "errors"
        "fmt"
        prand "math/rand"
        "sync"
        "sync/atomic"
        "time"

        "github.com/btcsuite/btcd/btcutil"
        "github.com/btcsuite/btcd/wire"
        "github.com/btcsuite/btclog/v2"
        "github.com/lightningnetwork/lnd/channeldb"
        "github.com/lightningnetwork/lnd/contractcourt"
        "github.com/lightningnetwork/lnd/fn/v2"
        "github.com/lightningnetwork/lnd/graph/db/models"
        "github.com/lightningnetwork/lnd/htlcswitch/hodl"
        "github.com/lightningnetwork/lnd/htlcswitch/hop"
        "github.com/lightningnetwork/lnd/input"
        "github.com/lightningnetwork/lnd/invoices"
        "github.com/lightningnetwork/lnd/lnpeer"
        "github.com/lightningnetwork/lnd/lntypes"
        "github.com/lightningnetwork/lnd/lnutils"
        "github.com/lightningnetwork/lnd/lnwallet"
        "github.com/lightningnetwork/lnd/lnwallet/chainfee"
        "github.com/lightningnetwork/lnd/lnwire"
        "github.com/lightningnetwork/lnd/queue"
        "github.com/lightningnetwork/lnd/record"
        "github.com/lightningnetwork/lnd/routing/route"
        "github.com/lightningnetwork/lnd/ticker"
        "github.com/lightningnetwork/lnd/tlv"
)

const (
        // DefaultMaxOutgoingCltvExpiry is the maximum outgoing time lock that
        // the node accepts for forwarded payments. The value is relative to the
        // current block height. The reason to have a maximum is to prevent
        // funds getting locked up unreasonably long. Otherwise, an attacker
        // willing to lock its own funds too, could force the funds of this node
        // to be locked up for an indefinite (max int32) number of blocks.
        //
        // The value 2016 corresponds to on average two weeks worth of blocks
        // and is based on the maximum number of hops (20), the default CLTV
        // delta (40), and some extra margin to account for the other lightning
        // implementations and past lnd versions which used to have a default
        // CLTV delta of 144.
        DefaultMaxOutgoingCltvExpiry = 2016

        // DefaultMinLinkFeeUpdateTimeout represents the minimum interval in
        // which a link should propose to update its commitment fee rate.
        DefaultMinLinkFeeUpdateTimeout = 10 * time.Minute

        // DefaultMaxLinkFeeUpdateTimeout represents the maximum interval in
        // which a link should propose to update its commitment fee rate.
        DefaultMaxLinkFeeUpdateTimeout = 60 * time.Minute

        // DefaultMaxLinkFeeAllocation is the highest allocation we'll allow
        // a channel's commitment fee to be of its balance. This only applies to
        // the initiator of the channel.
        DefaultMaxLinkFeeAllocation float64 = 0.5
)

// ExpectedFee computes the expected fee for a given htlc amount. The value
// returned from this function is to be used as a sanity check when forwarding
// HTLC's to ensure that an incoming HTLC properly adheres to our propagated
// forwarding policy.
//
// TODO(roasbeef): also add in current available channel bandwidth, inverse
// func
func ExpectedFee(f models.ForwardingPolicy,
        htlcAmt lnwire.MilliSatoshi) lnwire.MilliSatoshi {

        return f.BaseFee + (htlcAmt*f.FeeRate)/1000000
}

// ChannelLinkConfig defines the configuration for the channel link. ALL
// elements within the configuration MUST be non-nil for channel link to carry
// out its duties.
type ChannelLinkConfig struct {
        // FwrdingPolicy is the initial forwarding policy to be used when
        // deciding whether to forwarding incoming HTLC's or not. This value
        // can be updated with subsequent calls to UpdateForwardingPolicy
        // targeted at a given ChannelLink concrete interface implementation.
        FwrdingPolicy models.ForwardingPolicy

        // Circuits provides restricted access to the switch's circuit map,
        // allowing the link to open and close circuits.
        Circuits CircuitModifier

        // BestHeight returns the best known height.
        BestHeight func() uint32

        // ForwardPackets attempts to forward the batch of htlcs through the
        // switch. The function returns and error in case it fails to send one or
        // more packets. The link's quit signal should be provided to allow
        // cancellation of forwarding during link shutdown.
        ForwardPackets func(<-chan struct{}, bool, ...*htlcPacket) error

        // DecodeHopIterators facilitates batched decoding of HTLC Sphinx onion
        // blobs, which are then used to inform how to forward an HTLC.
        //
        // NOTE: This function assumes the same set of readers and preimages
        // are always presented for the same identifier. The last boolean is
        // used to decide whether this is a reforwarding or not - when it's
        // reforwarding, we skip the replay check enforced in our decay log.
        DecodeHopIterators func([]byte, []hop.DecodeHopIteratorRequest, bool) (
                []hop.DecodeHopIteratorResponse, error)

        // ExtractErrorEncrypter function is responsible for decoding HTLC
        // Sphinx onion blob, and creating onion failure obfuscator.
        ExtractErrorEncrypter hop.ErrorEncrypterExtracter

        // FetchLastChannelUpdate retrieves the latest routing policy for a
        // target channel. This channel will typically be the outgoing channel
        // specified when we receive an incoming HTLC.  This will be used to
        // provide payment senders our latest policy when sending encrypted
        // error messages.
        FetchLastChannelUpdate func(lnwire.ShortChannelID) (
                *lnwire.ChannelUpdate1, error)

        // Peer is a lightning network node with which we have the channel link
        // opened.
        Peer lnpeer.Peer

        // Registry is a sub-system which responsible for managing the invoices
        // in thread-safe manner.
        Registry InvoiceDatabase

        // PreimageCache is a global witness beacon that houses any new
        // preimages discovered by other links. We'll use this to add new
        // witnesses that we discover which will notify any sub-systems
        // subscribed to new events.
        PreimageCache contractcourt.WitnessBeacon

        // OnChannelFailure is a function closure that we'll call if the
        // channel failed for some reason. Depending on the severity of the
        // error, the closure potentially must force close this channel and
        // disconnect the peer.
        //
        // NOTE: The method must return in order for the ChannelLink to be able
        // to shut down properly.
        OnChannelFailure func(lnwire.ChannelID, lnwire.ShortChannelID,
                LinkFailureError)

        // UpdateContractSignals is a function closure that we'll use to update
        // outside sub-systems with this channel's latest ShortChannelID.
        UpdateContractSignals func(*contractcourt.ContractSignals) error

        // NotifyContractUpdate is a function closure that we'll use to update
        // the contractcourt and more specifically the ChannelArbitrator of the
        // latest channel state.
        NotifyContractUpdate func(*contractcourt.ContractUpdate) error

        // ChainEvents is an active subscription to the chain watcher for this
        // channel to be notified of any on-chain activity related to this
        // channel.
        ChainEvents *contractcourt.ChainEventSubscription

        // FeeEstimator is an instance of a live fee estimator which will be
        // used to dynamically regulate the current fee of the commitment
        // transaction to ensure timely confirmation.
        FeeEstimator chainfee.Estimator

        // hodl.Mask is a bitvector composed of hodl.Flags, specifying breakpoints
        // for HTLC forwarding internal to the switch.
        //
        // NOTE: This should only be used for testing.
        HodlMask hodl.Mask

        // SyncStates is used to indicate that we need send the channel
        // reestablishment message to the remote peer. It should be done if our
        // clients have been restarted, or remote peer have been reconnected.
        SyncStates bool

        // BatchTicker is the ticker that determines the interval that we'll
        // use to check the batch to see if there're any updates we should
        // flush out. By batching updates into a single commit, we attempt to
        // increase throughput by maximizing the number of updates coalesced
        // into a single commit.
        BatchTicker ticker.Ticker

        // FwdPkgGCTicker is the ticker determining the frequency at which
        // garbage collection of forwarding packages occurs. We use a
        // time-based approach, as opposed to block epochs, as to not hinder
        // syncing.
        FwdPkgGCTicker ticker.Ticker

        // PendingCommitTicker is a ticker that allows the link to determine if
        // a locally initiated commitment dance gets stuck waiting for the
        // remote party to revoke.
        PendingCommitTicker ticker.Ticker

        // BatchSize is the max size of a batch of updates done to the link
        // before we do a state update.
        BatchSize uint32

        // UnsafeReplay will cause a link to replay the adds in its latest
        // commitment txn after the link is restarted. This should only be used
        // in testing, it is here to ensure the sphinx replay detection on the
        // receiving node is persistent.
        UnsafeReplay bool

        // MinUpdateTimeout represents the minimum interval in which a link
        // will propose to update its commitment fee rate. A random timeout will
        // be selected between this and MaxUpdateTimeout.
        MinUpdateTimeout time.Duration

        // MaxUpdateTimeout represents the maximum interval in which a link
        // will propose to update its commitment fee rate. A random timeout will
        // be selected between this and MinUpdateTimeout.
        MaxUpdateTimeout time.Duration

        // OutgoingCltvRejectDelta defines the number of blocks before expiry of
        // an htlc where we don't offer an htlc anymore. This should be at least
        // the outgoing broadcast delta, because in any case we don't want to
        // risk offering an htlc that triggers channel closure.
        OutgoingCltvRejectDelta uint32

        // TowerClient is an optional engine that manages the signing,
        // encrypting, and uploading of justice transactions to the daemon's
        // configured set of watchtowers for legacy channels.
        TowerClient TowerClient

        // MaxOutgoingCltvExpiry is the maximum outgoing timelock that the link
        // should accept for a forwarded HTLC. The value is relative to the
        // current block height.
        MaxOutgoingCltvExpiry uint32

        // MaxFeeAllocation is the highest allocation we'll allow a channel's
        // commitment fee to be of its balance. This only applies to the
        // initiator of the channel.
        MaxFeeAllocation float64

        // MaxAnchorsCommitFeeRate is the max commitment fee rate we'll use as
        // the initiator for channels of the anchor type.
        MaxAnchorsCommitFeeRate chainfee.SatPerKWeight

        // NotifyActiveLink allows the link to tell the ChannelNotifier when a
        // link is first started.
        NotifyActiveLink func(wire.OutPoint)

        // NotifyActiveChannel allows the link to tell the ChannelNotifier when
        // channels becomes active.
        NotifyActiveChannel func(wire.OutPoint)

        // NotifyInactiveChannel allows the switch to tell the ChannelNotifier
        // when channels become inactive.
        NotifyInactiveChannel func(wire.OutPoint)

        // NotifyInactiveLinkEvent allows the switch to tell the
        // ChannelNotifier when a channel link become inactive.
        NotifyInactiveLinkEvent func(wire.OutPoint)

        // HtlcNotifier is an instance of a htlcNotifier which we will pipe htlc
        // events through.
        HtlcNotifier htlcNotifier

        // FailAliasUpdate is a function used to fail an HTLC for an
        // option_scid_alias channel.
        FailAliasUpdate func(sid lnwire.ShortChannelID,
                incoming bool) *lnwire.ChannelUpdate1

        // GetAliases is used by the link and switch to fetch the set of
        // aliases for a given link.
        GetAliases func(base lnwire.ShortChannelID) []lnwire.ShortChannelID

        // PreviouslySentShutdown is an optional value that is set if, at the
        // time of the link being started, persisted shutdown info was found for
        // the channel. This value being set means that we previously sent a
        // Shutdown message to our peer, and so we should do so again on
        // re-establish and should not allow anymore HTLC adds on the outgoing
        // direction of the link.
        PreviouslySentShutdown fn.Option[lnwire.Shutdown]

        // Adds the option to disable forwarding payments in blinded routes
        // by failing back any blinding-related payloads as if they were
        // invalid.
        DisallowRouteBlinding bool

        // DisallowQuiescence is a flag that can be used to disable the
        // quiescence protocol.
        DisallowQuiescence bool

        // MaxFeeExposure is the threshold in milli-satoshis after which we'll
        // restrict the flow of HTLCs and fee updates.
        MaxFeeExposure lnwire.MilliSatoshi

        // ShouldFwdExpEndorsement is a closure that indicates whether the link
        // should forward experimental endorsement signals.
        ShouldFwdExpEndorsement func() bool

        // AuxTrafficShaper is an optional auxiliary traffic shaper that can be
        // used to manage the bandwidth of the link.
        AuxTrafficShaper fn.Option[AuxTrafficShaper]

        // QuiescenceTimeout is the max duration that the channel can be
        // quiesced. Any dependent protocols (dynamic commitments, splicing,
        // etc.) must finish their operations under this timeout value,
        // otherwise the node will disconnect.
        QuiescenceTimeout time.Duration
}

// channelLink is the service which drives a channel's commitment update
// state-machine. In the event that an HTLC needs to be propagated to another
// link, the forward handler from config is used which sends HTLC to the
// switch. Additionally, the link encapsulate logic of commitment protocol
// message ordering and updates.
type channelLink struct {
        // The following fields are only meant to be used *atomically*
        started       int32
        reestablished int32
        shutdown      int32

        // failed should be set to true in case a link error happens, making
        // sure we don't process any more updates.
        failed bool

        // keystoneBatch represents a volatile list of keystones that must be
        // written before attempting to sign the next commitment txn. These
        // represent all the HTLC's forwarded to the link from the switch. Once
        // we lock them into our outgoing commitment, then the circuit has a
        // keystone, and is fully opened.
        keystoneBatch []Keystone

        // openedCircuits is the set of all payment circuits that will be open
        // once we make our next commitment. After making the commitment we'll
        // ACK all these from our mailbox to ensure that they don't get
        // re-delivered if we reconnect.
        openedCircuits []CircuitKey

        // closedCircuits is the set of all payment circuits that will be
        // closed once we make our next commitment. After taking the commitment
        // we'll ACK all these to ensure that they don't get re-delivered if we
        // reconnect.
        closedCircuits []CircuitKey

        // channel is a lightning network channel to which we apply htlc
        // updates.
        channel *lnwallet.LightningChannel

        // cfg is a structure which carries all dependable fields/handlers
        // which may affect behaviour of the service.
        cfg ChannelLinkConfig

        // mailBox is the main interface between the outside world and the
        // link. All incoming messages will be sent over this mailBox. Messages
        // include new updates from our connected peer, and new packets to be
        // forwarded sent by the switch.
        mailBox MailBox

        // upstream is a channel that new messages sent from the remote peer to
        // the local peer will be sent across.
        upstream chan lnwire.Message

        // downstream is a channel in which new multi-hop HTLC's to be
        // forwarded will be sent across. Messages from this channel are sent
        // by the HTLC switch.
        downstream chan *htlcPacket

        // updateFeeTimer is the timer responsible for updating the link's
        // commitment fee every time it fires.
        updateFeeTimer *time.Timer

        // uncommittedPreimages stores a list of all preimages that have been
        // learned since receiving the last CommitSig from the remote peer. The
        // batch will be flushed just before accepting the subsequent CommitSig
        // or on shutdown to avoid doing a write for each preimage received.
        uncommittedPreimages []lntypes.Preimage

        sync.RWMutex

        // hodlQueue is used to receive exit hop htlc resolutions from invoice
        // registry.
        hodlQueue *queue.ConcurrentQueue

        // hodlMap stores related htlc data for a circuit key. It allows
        // resolving those htlcs when we receive a message on hodlQueue.
        hodlMap map[models.CircuitKey]hodlHtlc

        // log is a link-specific logging instance.
        log btclog.Logger

        // isOutgoingAddBlocked tracks whether the channelLink can send an
        // UpdateAddHTLC.
        isOutgoingAddBlocked atomic.Bool

        // isIncomingAddBlocked tracks whether the channelLink can receive an
        // UpdateAddHTLC.
        isIncomingAddBlocked atomic.Bool

        // flushHooks is a hookMap that is triggered when we reach a channel
        // state with no live HTLCs.
        flushHooks hookMap

        // outgoingCommitHooks is a hookMap that is triggered after we send our
        // next CommitSig.
        outgoingCommitHooks hookMap

        // incomingCommitHooks is a hookMap that is triggered after we receive
        // our next CommitSig.
        incomingCommitHooks hookMap

        // quiescer is the state machine that tracks where this channel is with
        // respect to the quiescence protocol.
        quiescer Quiescer

        // quiescenceReqs is a queue of requests to quiesce this link. The
        // members of the queue are send-only channels we should call back with
        // the result.
        quiescenceReqs chan StfuReq

        // cg is a helper that encapsulates a wait group and quit channel and
        // allows contexts that either block or cancel on those depending on
        // the use case.
        cg *fn.ContextGuard
}

// hookMap is a data structure that is used to track the hooks that need to be
// called in various parts of the channelLink's lifecycle.
//
// WARNING: NOT thread-safe.
type hookMap struct {
        // allocIdx keeps track of the next id we haven't yet allocated.
        allocIdx atomic.Uint64

        // transient is a map of hooks that are only called the next time invoke
        // is called. These hooks are deleted during invoke.
        transient map[uint64]func()

        // newTransients is a channel that we use to accept new hooks into the
        // hookMap.
        newTransients chan func()
}

// newHookMap initializes a new empty hookMap.
func newHookMap() hookMap {
        return hookMap{
                allocIdx:      atomic.Uint64{},
                transient:     make(map[uint64]func()),
                newTransients: make(chan func()),
        }
}

// alloc allocates space in the hook map for the supplied hook, the second
// argument determines whether it goes into the transient or persistent part
// of the hookMap.
func (m *hookMap) alloc(hook func()) uint64 {
        // We assume we never overflow a uint64. Seems OK.
        hookID := m.allocIdx.Add(1)
        if hookID == 0 {
                panic("hookMap allocIdx overflow")
        }
        m.transient[hookID] = hook

        return hookID
}

// invoke is used on a hook map to call all the registered hooks and then clear
// out the transient hooks so they are not called again.
func (m *hookMap) invoke() {
        for _, hook := range m.transient {
                hook()
        }

        m.transient = make(map[uint64]func())
}

// hodlHtlc contains htlc data that is required for resolution.
type hodlHtlc struct {
        add        lnwire.UpdateAddHTLC
        sourceRef  channeldb.AddRef
        obfuscator hop.ErrorEncrypter
}

// NewChannelLink creates a new instance of a ChannelLink given a configuration
// and active channel that will be used to verify/apply updates to.
func NewChannelLink(cfg ChannelLinkConfig,
        channel *lnwallet.LightningChannel) ChannelLink {

        logPrefix := fmt.Sprintf("ChannelLink(%v):", channel.ChannelPoint())

        // If the max fee exposure isn't set, use the default.
        if cfg.MaxFeeExposure == 0 {
                cfg.MaxFeeExposure = DefaultMaxFeeExposure
        }

        var qsm Quiescer
        if !cfg.DisallowQuiescence {
                qsm = NewQuiescer(QuiescerCfg{
                        chanID: lnwire.NewChanIDFromOutPoint(
                                channel.ChannelPoint(),
                        ),
                        channelInitiator: channel.Initiator(),
                        sendMsg: func(s lnwire.Stfu) error {
                                return cfg.Peer.SendMessage(false, &s)
                        },
                        timeoutDuration: cfg.QuiescenceTimeout,
                        onTimeout: func() {
                                cfg.Peer.Disconnect(ErrQuiescenceTimeout)
                        },
                })
        } else {
                qsm = &quiescerNoop{}
        }

        quiescenceReqs := make(
                chan fn.Req[fn.Unit, fn.Result[lntypes.ChannelParty]], 1,
        )

        return &channelLink{
                cfg:                 cfg,
                channel:             channel,
                hodlMap:             make(map[models.CircuitKey]hodlHtlc),
                hodlQueue:           queue.NewConcurrentQueue(10),
                log:                 log.WithPrefix(logPrefix),
                flushHooks:          newHookMap(),
                outgoingCommitHooks: newHookMap(),
                incomingCommitHooks: newHookMap(),
                quiescer:            qsm,
                quiescenceReqs:      quiescenceReqs,
                cg:                  fn.NewContextGuard(),
        }
}

// A compile time check to ensure channelLink implements the ChannelLink
// interface.
var _ ChannelLink = (*channelLink)(nil)

// Start starts all helper goroutines required for the operation of the channel
// link.
//
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) Start() error {
        if !atomic.CompareAndSwapInt32(&l.started, 0, 1) {
                err := fmt.Errorf("channel link(%v): already started", l)
                l.log.Warn("already started")
                return err
        }

        l.log.Info("starting")

        // If the config supplied watchtower client, ensure the channel is
        // registered before trying to use it during operation.
        if l.cfg.TowerClient != nil {
                err := l.cfg.TowerClient.RegisterChannel(
                        l.ChanID(), l.channel.State().ChanType,
                )
                if err != nil {
                        return err
                }
        }

        l.mailBox.ResetMessages()
        l.hodlQueue.Start()

        // Before launching the htlcManager messages, revert any circuits that
        // were marked open in the switch's circuit map, but did not make it
        // into a commitment txn. We use the next local htlc index as the cut
        // off point, since all indexes below that are committed. This action
        // is only performed if the link's final short channel ID has been
        // assigned, otherwise we would try to trim the htlcs belonging to the
        // all-zero, hop.Source ID.
        if l.ShortChanID() != hop.Source {
                localHtlcIndex, err := l.channel.NextLocalHtlcIndex()
                if err != nil {
                        return fmt.Errorf("unable to retrieve next local "+
                                "htlc index: %v", err)
                }

                // NOTE: This is automatically done by the switch when it
                // starts up, but is necessary to prevent inconsistencies in
                // the case that the link flaps. This is a result of a link's
                // life-cycle being shorter than that of the switch.
                chanID := l.ShortChanID()
                err = l.cfg.Circuits.TrimOpenCircuits(chanID, localHtlcIndex)
                if err != nil {
                        return fmt.Errorf("unable to trim circuits above "+
                                "local htlc index %d: %v", localHtlcIndex, err)
                }

                // Since the link is live, before we start the link we'll update
                // the ChainArbitrator with the set of new channel signals for
                // this channel.
                //
                // TODO(roasbeef): split goroutines within channel arb to avoid
                go func() {
                        signals := &contractcourt.ContractSignals{
                                ShortChanID: l.channel.ShortChanID(),
                        }

                        err := l.cfg.UpdateContractSignals(signals)
                        if err != nil {
                                l.log.Errorf("unable to update signals")
                        }
                }()
        }

        l.updateFeeTimer = time.NewTimer(l.randomFeeUpdateTimeout())

        l.cg.WgAdd(1)
        go l.htlcManager(context.TODO())

        return nil
}

// Stop gracefully stops all active helper goroutines, then waits until they've
// exited.
//
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) Stop() {
        if !atomic.CompareAndSwapInt32(&l.shutdown, 0, 1) {
                l.log.Warn("already stopped")
                return
        }

        l.log.Info("stopping")

        // As the link is stopping, we are no longer interested in htlc
        // resolutions coming from the invoice registry.
        l.cfg.Registry.HodlUnsubscribeAll(l.hodlQueue.ChanIn())

        if l.cfg.ChainEvents.Cancel != nil {
                l.cfg.ChainEvents.Cancel()
        }

        // Ensure the channel for the timer is drained.
        if l.updateFeeTimer != nil {
                if !l.updateFeeTimer.Stop() {
                        select {
                        case <-l.updateFeeTimer.C:
                        default:
                        }
                }
        }

        if l.hodlQueue != nil {
                l.hodlQueue.Stop()
        }

        l.cg.Quit()
        l.cg.WgWait()

        // Now that the htlcManager has completely exited, reset the packet
        // courier. This allows the mailbox to revaluate any lingering Adds that
        // were delivered but didn't make it on a commitment to be failed back
        // if the link is offline for an extended period of time. The error is
        // ignored since it can only fail when the daemon is exiting.
        _ = l.mailBox.ResetPackets()

        // As a final precaution, we will attempt to flush any uncommitted
        // preimages to the preimage cache. The preimages should be re-delivered
        // after channel reestablishment, however this adds an extra layer of
        // protection in case the peer never returns. Without this, we will be
        // unable to settle any contracts depending on the preimages even though
        // we had learned them at some point.
        err := l.cfg.PreimageCache.AddPreimages(l.uncommittedPreimages...)
        if err != nil {
                l.log.Errorf("unable to add preimages=%v to cache: %v",
                        l.uncommittedPreimages, err)
        }
}

// WaitForShutdown blocks until the link finishes shutting down, which includes
// termination of all dependent goroutines.
func (l *channelLink) WaitForShutdown() {
        l.cg.WgWait()
}

// EligibleToForward returns a bool indicating if the channel is able to
// actively accept requests to forward HTLC's. We're able to forward HTLC's if
// we are eligible to update AND the channel isn't currently flushing the
// outgoing half of the channel.
//
// NOTE: MUST NOT be called from the main event loop.
func (l *channelLink) EligibleToForward() bool {
        l.RLock()
        defer l.RUnlock()

        return l.eligibleToForward()
}

// eligibleToForward returns a bool indicating if the channel is able to
// actively accept requests to forward HTLC's. We're able to forward HTLC's if
// we are eligible to update AND the channel isn't currently flushing the
// outgoing half of the channel.
//
// NOTE: MUST be called from the main event loop.
func (l *channelLink) eligibleToForward() bool {
        return l.eligibleToUpdate() && !l.IsFlushing(Outgoing)
}

// eligibleToUpdate returns a bool indicating if the channel is able to update
// channel state. We're able to update channel state if we know the remote
// party's next revocation point. Otherwise, we can't initiate new channel
// state. We also require that the short channel ID not be the all-zero source
// ID, meaning that the channel has had its ID finalized.
//
// NOTE: MUST be called from the main event loop.
func (l *channelLink) eligibleToUpdate() bool {
        return l.channel.RemoteNextRevocation() != nil &&
                l.channel.ShortChanID() != hop.Source &&
                l.isReestablished() &&
                l.quiescer.CanSendUpdates()
}

// EnableAdds sets the ChannelUpdateHandler state to allow UpdateAddHtlc's in
// the specified direction. It returns true if the state was changed and false
// if the desired state was already set before the method was called.
func (l *channelLink) EnableAdds(linkDirection LinkDirection) bool {
        if linkDirection == Outgoing {
                return l.isOutgoingAddBlocked.Swap(false)
        }

        return l.isIncomingAddBlocked.Swap(false)
}

// DisableAdds sets the ChannelUpdateHandler state to allow UpdateAddHtlc's in
// the specified direction. It returns true if the state was changed and false
// if the desired state was already set before the method was called.
func (l *channelLink) DisableAdds(linkDirection LinkDirection) bool {
        if linkDirection == Outgoing {
                return !l.isOutgoingAddBlocked.Swap(true)
        }

        return !l.isIncomingAddBlocked.Swap(true)
}

// IsFlushing returns true when UpdateAddHtlc's are disabled in the direction of
// the argument.
func (l *channelLink) IsFlushing(linkDirection LinkDirection) bool {
        if linkDirection == Outgoing {
                return l.isOutgoingAddBlocked.Load()
        }

        return l.isIncomingAddBlocked.Load()
}

// OnFlushedOnce adds a hook that will be called the next time the channel
// state reaches zero htlcs. This hook will only ever be called once. If the
// channel state already has zero htlcs, then this will be called immediately.
func (l *channelLink) OnFlushedOnce(hook func()) {
        select {
        case l.flushHooks.newTransients <- hook:
        case <-l.cg.Done():
        }
}

// OnCommitOnce adds a hook that will be called the next time a CommitSig
// message is sent in the argument's LinkDirection. This hook will only ever be
// called once. If no CommitSig is owed in the argument's LinkDirection, then
// we will call this hook be run immediately.
func (l *channelLink) OnCommitOnce(direction LinkDirection, hook func()) {
        var queue chan func()

        if direction == Outgoing {
                queue = l.outgoingCommitHooks.newTransients
        } else {
                queue = l.incomingCommitHooks.newTransients
        }

        select {
        case queue <- hook:
        case <-l.cg.Done():
        }
}

// InitStfu allows us to initiate quiescence on this link. It returns a receive
// only channel that will block until quiescence has been achieved, or
// definitively fails.
//
// This operation has been added to allow channels to be quiesced via RPC. It
// may be removed or reworked in the future as RPC initiated quiescence is a
// holdover until we have downstream protocols that use it.
func (l *channelLink) InitStfu() <-chan fn.Result[lntypes.ChannelParty] {
        req, out := fn.NewReq[fn.Unit, fn.Result[lntypes.ChannelParty]](
                fn.Unit{},
        )

        select {
        case l.quiescenceReqs <- req:
        case <-l.cg.Done():
                req.Resolve(fn.Err[lntypes.ChannelParty](ErrLinkShuttingDown))
        }

        return out
}

// isReestablished returns true if the link has successfully completed the
// channel reestablishment dance.
func (l *channelLink) isReestablished() bool {
        return atomic.LoadInt32(&l.reestablished) == 1
}

// markReestablished signals that the remote peer has successfully exchanged
// channel reestablish messages and that the channel is ready to process
// subsequent messages.
func (l *channelLink) markReestablished() {
        atomic.StoreInt32(&l.reestablished, 1)
}

// IsUnadvertised returns true if the underlying channel is unadvertised.
func (l *channelLink) IsUnadvertised() bool {
        state := l.channel.State()
        return state.ChannelFlags&lnwire.FFAnnounceChannel == 0
}

// sampleNetworkFee samples the current fee rate on the network to get into the
// chain in a timely manner. The returned value is expressed in fee-per-kw, as
// this is the native rate used when computing the fee for commitment
// transactions, and the second-level HTLC transactions.
func (l *channelLink) sampleNetworkFee() (chainfee.SatPerKWeight, error) {
        // We'll first query for the sat/kw recommended to be confirmed within 3
        // blocks.
        feePerKw, err := l.cfg.FeeEstimator.EstimateFeePerKW(3)
        if err != nil {
                return 0, err
        }

        l.log.Debugf("sampled fee rate for 3 block conf: %v sat/kw",
                int64(feePerKw))

        return feePerKw, nil
}

// shouldAdjustCommitFee returns true if we should update our commitment fee to
// match that of the network fee. We'll only update our commitment fee if the
// network fee is +/- 10% to our commitment fee or if our current commitment
// fee is below the minimum relay fee.
func shouldAdjustCommitFee(netFee, chanFee,
        minRelayFee chainfee.SatPerKWeight) bool {

        switch {
        // If the network fee is greater than our current commitment fee and
        // our current commitment fee is below the minimum relay fee then
        // we should switch to it no matter if it is less than a 10% increase.
        case netFee > chanFee && chanFee < minRelayFee:
                return true

        // If the network fee is greater than the commitment fee, then we'll
        // switch to it if it's at least 10% greater than the commit fee.
        case netFee > chanFee && netFee >= (chanFee+(chanFee*10)/100):
                return true

        // If the network fee is less than our commitment fee, then we'll
        // switch to it if it's at least 10% less than the commitment fee.
        case netFee < chanFee && netFee <= (chanFee-(chanFee*10)/100):
                return true

        // Otherwise, we won't modify our fee.
        default:
                return false
        }
}

// failCb is used to cut down on the argument verbosity.
type failCb func(update *lnwire.ChannelUpdate1) lnwire.FailureMessage

// createFailureWithUpdate creates a ChannelUpdate when failing an incoming or
// outgoing HTLC. It may return a FailureMessage that references a channel's
// alias. If the channel does not have an alias, then the regular channel
// update from disk will be returned.
func (l *channelLink) createFailureWithUpdate(incoming bool,
        outgoingScid lnwire.ShortChannelID, cb failCb) lnwire.FailureMessage {

        // Determine which SCID to use in case we need to use aliases in the
        // ChannelUpdate.
        scid := outgoingScid
        if incoming {
                scid = l.ShortChanID()
        }

        // Try using the FailAliasUpdate function. If it returns nil, fallback
        // to the non-alias behavior.
        update := l.cfg.FailAliasUpdate(scid, incoming)
        if update == nil {
                // Fallback to the non-alias behavior.
                var err error
                update, err = l.cfg.FetchLastChannelUpdate(l.ShortChanID())
                if err != nil {
                        return &lnwire.FailTemporaryNodeFailure{}
                }
        }

        return cb(update)
}

// syncChanState attempts to synchronize channel states with the remote party.
// This method is to be called upon reconnection after the initial funding
// flow. We'll compare out commitment chains with the remote party, and re-send
// either a danging commit signature, a revocation, or both.
func (l *channelLink) syncChanStates(ctx context.Context) error {
        chanState := l.channel.State()

        l.log.Infof("Attempting to re-synchronize channel: %v", chanState)

        // First, we'll generate our ChanSync message to send to the other
        // side. Based on this message, the remote party will decide if they
        // need to retransmit any data or not.
        localChanSyncMsg, err := chanState.ChanSyncMsg()
        if err != nil {
                return fmt.Errorf("unable to generate chan sync message for "+
                        "ChannelPoint(%v)", l.channel.ChannelPoint())
        }
        if err := l.cfg.Peer.SendMessage(true, localChanSyncMsg); err != nil {
                return fmt.Errorf("unable to send chan sync message for "+
                        "ChannelPoint(%v): %v", l.channel.ChannelPoint(), err)
        }

        var msgsToReSend []lnwire.Message

        // Next, we'll wait indefinitely to receive the ChanSync message. The
        // first message sent MUST be the ChanSync message.
        select {
        case msg := <-l.upstream:
                l.log.Tracef("Received msg=%v from peer(%x)", msg.MsgType(),
                        l.cfg.Peer.PubKey())

                remoteChanSyncMsg, ok := msg.(*lnwire.ChannelReestablish)
                if !ok {
                        return fmt.Errorf("first message sent to sync "+
                                "should be ChannelReestablish, instead "+
                                "received: %T", msg)
                }

                // If the remote party indicates that they think we haven't
                // done any state updates yet, then we'll retransmit the
                // channel_ready message first. We do this, as at this point
                // we can't be sure if they've really received the
                // ChannelReady message.
                if remoteChanSyncMsg.NextLocalCommitHeight == 1 &&
                        localChanSyncMsg.NextLocalCommitHeight == 1 &&
                        !l.channel.IsPending() {

                        l.log.Infof("resending ChannelReady message to peer")

                        nextRevocation, err := l.channel.NextRevocationKey()
                        if err != nil {
                                return fmt.Errorf("unable to create next "+
                                        "revocation: %v", err)
                        }

                        channelReadyMsg := lnwire.NewChannelReady(
                                l.ChanID(), nextRevocation,
                        )

                        // If this is a taproot channel, then we'll send the
                        // very same nonce that we sent above, as they should
                        // take the latest verification nonce we send.
                        if chanState.ChanType.IsTaproot() {
                                //nolint:ll
                                channelReadyMsg.NextLocalNonce = localChanSyncMsg.LocalNonce
                        }

                        // For channels that negotiated the option-scid-alias
                        // feature bit, ensure that we send over the alias in
                        // the channel_ready message. We'll send the first
                        // alias we find for the channel since it does not
                        // matter which alias we send. We'll error out if no
                        // aliases are found.
                        if l.negotiatedAliasFeature() {
                                aliases := l.getAliases()
                                if len(aliases) == 0 {
                                        // This shouldn't happen since we
                                        // always add at least one alias before
                                        // the channel reaches the link.
                                        return fmt.Errorf("no aliases found")
                                }

                                // getAliases returns a copy of the alias slice
                                // so it is ok to use a pointer to the first
                                // entry.
                                channelReadyMsg.AliasScid = &aliases[0]
                        }

                        err = l.cfg.Peer.SendMessage(false, channelReadyMsg)
                        if err != nil {
                                return fmt.Errorf("unable to re-send "+
                                        "ChannelReady: %v", err)
                        }
                }

                // In any case, we'll then process their ChanSync message.
                l.log.Info("received re-establishment message from remote side")

                var (
                        openedCircuits []CircuitKey
                        closedCircuits []CircuitKey
                )

                // We've just received a ChanSync message from the remote
                // party, so we'll process the message  in order to determine
                // if we need to re-transmit any messages to the remote party.
                ctx, cancel := l.cg.Create(ctx)
                defer cancel()
                msgsToReSend, openedCircuits, closedCircuits, err =
                        l.channel.ProcessChanSyncMsg(ctx, remoteChanSyncMsg)
                if err != nil {
                        return err
                }

                // Repopulate any identifiers for circuits that may have been
                // opened or unclosed. This may happen if we needed to
                // retransmit a commitment signature message.
                l.openedCircuits = openedCircuits
                l.closedCircuits = closedCircuits

                // Ensure that all packets have been have been removed from the
                // link's mailbox.
                if err := l.ackDownStreamPackets(); err != nil {
                        return err
                }

                if len(msgsToReSend) > 0 {
                        l.log.Infof("sending %v updates to synchronize the "+
                                "state", len(msgsToReSend))
                }

                // If we have any messages to retransmit, we'll do so
                // immediately so we return to a synchronized state as soon as
                // possible.
                for _, msg := range msgsToReSend {
                        err := l.cfg.Peer.SendMessage(false, msg)
                        if err != nil {
                                l.log.Errorf("failed to send %v: %v",
                                        msg.MsgType(), err)
                        }
                }

        case <-l.cg.Done():
                return ErrLinkShuttingDown
        }

        return nil
}

// resolveFwdPkgs loads any forwarding packages for this link from disk, and
// reprocesses them in order. The primary goal is to make sure that any HTLCs
// we previously received are reinstated in memory, and forwarded to the switch
// if necessary. After a restart, this will also delete any previously
// completed packages.
func (l *channelLink) resolveFwdPkgs(ctx context.Context) error {
        fwdPkgs, err := l.channel.LoadFwdPkgs()
        if err != nil {
                return err
        }

        l.log.Debugf("loaded %d fwd pks", len(fwdPkgs))

        for _, fwdPkg := range fwdPkgs {
                if err := l.resolveFwdPkg(fwdPkg); err != nil {
                        return err
                }
        }

        // If any of our reprocessing steps require an update to the commitment
        // txn, we initiate a state transition to capture all relevant changes.
        if l.channel.NumPendingUpdates(lntypes.Local, lntypes.Remote) > 0 {
                return l.updateCommitTx(ctx)
        }

        return nil
}

// resolveFwdPkg interprets the FwdState of the provided package, either
// reprocesses any outstanding htlcs in the package, or performs garbage
// collection on the package.
func (l *channelLink) resolveFwdPkg(fwdPkg *channeldb.FwdPkg) error {
        // Remove any completed packages to clear up space.
        if fwdPkg.State == channeldb.FwdStateCompleted {
                l.log.Debugf("removing completed fwd pkg for height=%d",
                        fwdPkg.Height)

                err := l.channel.RemoveFwdPkgs(fwdPkg.Height)
                if err != nil {
                        l.log.Errorf("unable to remove fwd pkg for height=%d: "+
                                "%v", fwdPkg.Height, err)
                        return err
                }
        }

        // Otherwise this is either a new package or one has gone through
        // processing, but contains htlcs that need to be restored in memory.
        // We replay this forwarding package to make sure our local mem state
        // is resurrected, we mimic any original responses back to the remote
        // party, and re-forward the relevant HTLCs to the switch.

        // If the package is fully acked but not completed, it must still have
        // settles and fails to propagate.
        if !fwdPkg.SettleFailFilter.IsFull() {
                l.processRemoteSettleFails(fwdPkg)
        }

        // Finally, replay *ALL ADDS* in this forwarding package. The
        // downstream logic is able to filter out any duplicates, but we must
        // shove the entire, original set of adds down the pipeline so that the
        // batch of adds presented to the sphinx router does not ever change.
        if !fwdPkg.AckFilter.IsFull() {
                l.processRemoteAdds(fwdPkg)

                // If the link failed during processing the adds, we must
                // return to ensure we won't attempted to update the state
                // further.
                if l.failed {
                        return fmt.Errorf("link failed while " +
                                "processing remote adds")
                }
        }

        return nil
}

// fwdPkgGarbager periodically reads all forwarding packages from disk and
// removes those that can be discarded. It is safe to do this entirely in the
// background, since all state is coordinated on disk. This also ensures the
// link can continue to process messages and interleave database accesses.
//
// NOTE: This MUST be run as a goroutine.
func (l *channelLink) fwdPkgGarbager() {
        defer l.cg.WgDone()

        l.cfg.FwdPkgGCTicker.Resume()
        defer l.cfg.FwdPkgGCTicker.Stop()

        if err := l.loadAndRemove(); err != nil {
                l.log.Warnf("unable to run initial fwd pkgs gc: %v", err)
        }

        for {
                select {
                case <-l.cfg.FwdPkgGCTicker.Ticks():
                        if err := l.loadAndRemove(); err != nil {
                                l.log.Warnf("unable to remove fwd pkgs: %v",
                                        err)
                                continue
                        }
                case <-l.cg.Done():
                        return
                }
        }
}

// loadAndRemove loads all the channels forwarding packages and determines if
// they can be removed. It is called once before the FwdPkgGCTicker ticks so that
// a longer tick interval can be used.
func (l *channelLink) loadAndRemove() error {
        fwdPkgs, err := l.channel.LoadFwdPkgs()
        if err != nil {
                return err
        }

        var removeHeights []uint64
        for _, fwdPkg := range fwdPkgs {
                if fwdPkg.State != channeldb.FwdStateCompleted {
                        continue
                }

                removeHeights = append(removeHeights, fwdPkg.Height)
        }

        // If removeHeights is empty, return early so we don't use a db
        // transaction.
        if len(removeHeights) == 0 {
                return nil
        }

        return l.channel.RemoveFwdPkgs(removeHeights...)
}

// handleChanSyncErr performs the error handling logic in the case where we
// could not successfully syncChanStates with our channel peer.
func (l *channelLink) handleChanSyncErr(err error) {
        l.log.Warnf("error when syncing channel states: %v", err)

        var errDataLoss *lnwallet.ErrCommitSyncLocalDataLoss

        switch {
        case errors.Is(err, ErrLinkShuttingDown):
                l.log.Debugf("unable to sync channel states, link is " +
                        "shutting down")
                return

        // We failed syncing the commit chains, probably because the remote has
        // lost state. We should force close the channel.
        case errors.Is(err, lnwallet.ErrCommitSyncRemoteDataLoss):
                fallthrough

        // The remote sent us an invalid last commit secret, we should force
        // close the channel.
        // TODO(halseth): and permanently ban the peer?
        case errors.Is(err, lnwallet.ErrInvalidLastCommitSecret):
                fallthrough

        // The remote sent us a commit point different from what they sent us
        // before.
        // TODO(halseth): ban peer?
        case errors.Is(err, lnwallet.ErrInvalidLocalUnrevokedCommitPoint):
                // We'll fail the link and tell the peer to force close the
                // channel. Note that the database state is not updated here,
                // but will be updated when the close transaction is ready to
                // avoid that we go down before storing the transaction in the
                // db.
                l.failf(
                        LinkFailureError{
                                code:          ErrSyncError,
                                FailureAction: LinkFailureForceClose,
                        },
                        "unable to synchronize channel states: %v", err,
                )

        // We have lost state and cannot safely force close the channel. Fail
        // the channel and wait for the remote to hopefully force close it. The
        // remote has sent us its latest unrevoked commitment point, and we'll
        // store it in the database, such that we can attempt to recover the
        // funds if the remote force closes the channel.
        case errors.As(err, &errDataLoss):
                err := l.channel.MarkDataLoss(
                        errDataLoss.CommitPoint,
                )
                if err != nil {
                        l.log.Errorf("unable to mark channel data loss: %v",
                                err)
                }

        // We determined the commit chains were not possible to sync. We
        // cautiously fail the channel, but don't force close.
        // TODO(halseth): can we safely force close in any cases where this
        // error is returned?
        case errors.Is(err, lnwallet.ErrCannotSyncCommitChains):
                if err := l.channel.MarkBorked(); err != nil {
                        l.log.Errorf("unable to mark channel borked: %v", err)
                }

        // Other, unspecified error.
        default:
        }

        l.failf(
                LinkFailureError{
                        code:          ErrRecoveryError,
                        FailureAction: LinkFailureForceNone,
                },
                "unable to synchronize channel states: %v", err,
        )
}

// htlcManager is the primary goroutine which drives a channel's commitment
// update state-machine in response to messages received via several channels.
// This goroutine reads messages from the upstream (remote) peer, and also from
// downstream channel managed by the channel link. In the event that an htlc
// needs to be forwarded, then send-only forward handler is used which sends
// htlc packets to the switch. Additionally, this goroutine handles acting upon
// all timeouts for any active HTLCs, manages the channel's revocation window,
// and also the htlc trickle queue+timer for this active channels.
//
// NOTE: This MUST be run as a goroutine.
func (l *channelLink) htlcManager(ctx context.Context) {
        defer func() {
                l.cfg.BatchTicker.Stop()
                l.cg.WgDone()
                l.log.Infof("exited")
        }()

        l.log.Infof("HTLC manager started, bandwidth=%v", l.Bandwidth())

        // Notify any clients that the link is now in the switch via an
        // ActiveLinkEvent. We'll also defer an inactive link notification for
        // when the link exits to ensure that every active notification is
        // matched by an inactive one.
        l.cfg.NotifyActiveLink(l.ChannelPoint())
        defer l.cfg.NotifyInactiveLinkEvent(l.ChannelPoint())

        // If the link is not started for the first time, we need to take extra
        // steps to resume its state.
        err := l.resumeLink(ctx)
        if err != nil {
                l.log.Errorf("resuming link failed: %v", err)
                return
        }

        // Now that we've received both channel_ready and channel reestablish,
        // we can go ahead and send the active channel notification. We'll also
        // defer the inactive notification for when the link exits to ensure
        // that every active notification is matched by an inactive one.
        l.cfg.NotifyActiveChannel(l.ChannelPoint())
        defer l.cfg.NotifyInactiveChannel(l.ChannelPoint())

        for {
                // We must always check if we failed at some point processing
                // the last update before processing the next.
                if l.failed {
                        l.log.Errorf("link failed, exiting htlcManager")
                        return
                }

                // Pause or resume the batch ticker.
                l.toggleBatchTicker()

                select {
                // We have a new hook that needs to be run when we reach a clean
                // channel state.
                case hook := <-l.flushHooks.newTransients:
                        if l.channel.IsChannelClean() {
                                hook()
                        } else {
                                l.flushHooks.alloc(hook)
                        }

                // We have a new hook that needs to be run when we have
                // committed all of our updates.
                case hook := <-l.outgoingCommitHooks.newTransients:
                        if !l.channel.OweCommitment() {
                                hook()
                        } else {
                                l.outgoingCommitHooks.alloc(hook)
                        }

                // We have a new hook that needs to be run when our peer has
                // committed all of their updates.
                case hook := <-l.incomingCommitHooks.newTransients:
                        if !l.channel.NeedCommitment() {
                                hook()
                        } else {
                                l.incomingCommitHooks.alloc(hook)
                        }

                // Our update fee timer has fired, so we'll check the network
                // fee to see if we should adjust our commitment fee.
                case <-l.updateFeeTimer.C:
                        l.updateFeeTimer.Reset(l.randomFeeUpdateTimeout())
                        err := l.handleUpdateFee(ctx)
                        if err != nil {
                                l.log.Errorf("failed to handle update fee: "+
                                        "%v", err)
                        }

                // The underlying channel has notified us of a unilateral close
                // carried out by the remote peer. In the case of such an
                // event, we'll wipe the channel state from the peer, and mark
                // the contract as fully settled. Afterwards we can exit.
                //
                // TODO(roasbeef): add force closure? also breach?
                case <-l.cfg.ChainEvents.RemoteUnilateralClosure:
                        l.log.Warnf("remote peer has closed on-chain")

                        // TODO(roasbeef): remove all together
                        go func() {
                                chanPoint := l.channel.ChannelPoint()
                                l.cfg.Peer.WipeChannel(&chanPoint)
                        }()

                        return

                case <-l.cfg.BatchTicker.Ticks():
                        // Attempt to extend the remote commitment chain
                        // including all the currently pending entries. If the
                        // send was unsuccessful, then abandon the update,
                        // waiting for the revocation window to open up.
                        if !l.updateCommitTxOrFail(ctx) {
                                return
                        }

                case <-l.cfg.PendingCommitTicker.Ticks():
                        l.failf(
                                LinkFailureError{
                                        code:          ErrRemoteUnresponsive,
                                        FailureAction: LinkFailureDisconnect,
                                },
                                "unable to complete dance",
                        )
                        return

                // A message from the switch was just received. This indicates
                // that the link is an intermediate hop in a multi-hop HTLC
                // circuit.
                case pkt := <-l.downstream:
                        l.handleDownstreamPkt(ctx, pkt)

                // A message from the connected peer was just received. This
                // indicates that we have a new incoming HTLC, either directly
                // for us, or part of a multi-hop HTLC circuit.
                case msg := <-l.upstream:
                        l.handleUpstreamMsg(ctx, msg)

                // A htlc resolution is received. This means that we now have a
                // resolution for a previously accepted htlc.
                case hodlItem := <-l.hodlQueue.ChanOut():
                        err := l.handleHtlcResolution(ctx, hodlItem)
                        if err != nil {
                                l.log.Errorf("failed to handle htlc "+
                                        "resolution: %v", err)
                        }

                // A user-initiated quiescence request is received. We now
                // forward it to the quiescer.
                case qReq := <-l.quiescenceReqs:
                        err := l.handleQuiescenceReq(qReq)
                        if err != nil {
                                l.log.Errorf("failed handle quiescence "+
                                        "req: %v", err)
                        }

                case <-l.cg.Done():
                        return
                }
        }
}

// processHodlQueue processes a received htlc resolution and continues reading
// from the hodl queue until no more resolutions remain. When this function
// returns without an error, the commit tx should be updated.
func (l *channelLink) processHodlQueue(ctx context.Context,
        firstResolution invoices.HtlcResolution) error {

        // Try to read all waiting resolution messages, so that they can all be
        // processed in a single commitment tx update.
        htlcResolution := firstResolution
loop:
        for {
                // Lookup all hodl htlcs that can be failed or settled with this event.
                // The hodl htlc must be present in the map.
                circuitKey := htlcResolution.CircuitKey()
                hodlHtlc, ok := l.hodlMap[circuitKey]
                if !ok {
                        return fmt.Errorf("hodl htlc not found: %v", circuitKey)
                }

                if err := l.processHtlcResolution(htlcResolution, hodlHtlc); err != nil {
                        return err
                }

                // Clean up hodl map.
                delete(l.hodlMap, circuitKey)

                select {
                case item := <-l.hodlQueue.ChanOut():
                        htlcResolution = item.(invoices.HtlcResolution)

                // No need to process it if the link is broken.
                case <-l.cg.Done():
                        return ErrLinkShuttingDown

                default:
                        break loop
                }
        }

        // Update the commitment tx.
        if err := l.updateCommitTx(ctx); err != nil {
                return err
        }

        return nil
}

// processHtlcResolution applies a received htlc resolution to the provided
// htlc. When this function returns without an error, the commit tx should be
// updated.
func (l *channelLink) processHtlcResolution(resolution invoices.HtlcResolution,
        htlc hodlHtlc) error {

        circuitKey := resolution.CircuitKey()

        // Determine required action for the resolution based on the type of
        // resolution we have received.
        switch res := resolution.(type) {
        // Settle htlcs that returned a settle resolution using the preimage
        // in the resolution.
        case *invoices.HtlcSettleResolution:
                l.log.Debugf("received settle resolution for %v "+
                        "with outcome: %v", circuitKey, res.Outcome)

                return l.settleHTLC(
                        res.Preimage, htlc.add.ID, htlc.sourceRef,
                )

        // For htlc failures, we get the relevant failure message based
        // on the failure resolution and then fail the htlc.
        case *invoices.HtlcFailResolution:
                l.log.Debugf("received cancel resolution for "+
                        "%v with outcome: %v", circuitKey, res.Outcome)

                // Get the lnwire failure message based on the resolution
                // result.
                failure := getResolutionFailure(res, htlc.add.Amount)

                l.sendHTLCError(
                        htlc.add, htlc.sourceRef, failure, htlc.obfuscator,
                        true,
                )
                return nil

        // Fail if we do not get a settle of fail resolution, since we
        // are only expecting to handle settles and fails.
        default:
                return fmt.Errorf("unknown htlc resolution type: %T",
                        resolution)
        }
}

// getResolutionFailure returns the wire message that a htlc resolution should
// be failed with.
func getResolutionFailure(resolution *invoices.HtlcFailResolution,
        amount lnwire.MilliSatoshi) *LinkError {

        // If the resolution has been resolved as part of a MPP timeout,
        // we need to fail the htlc with lnwire.FailMppTimeout.
        if resolution.Outcome == invoices.ResultMppTimeout {
                return NewDetailedLinkError(
                        &lnwire.FailMPPTimeout{}, resolution.Outcome,
                )
        }

        // If the htlc is not a MPP timeout, we fail it with
        // FailIncorrectDetails. This error is sent for invoice payment
        // failures such as underpayment/ expiry too soon and hodl invoices
        // (which return FailIncorrectDetails to avoid leaking information).
        incorrectDetails := lnwire.NewFailIncorrectDetails(
                amount, uint32(resolution.AcceptHeight),
        )

        return NewDetailedLinkError(incorrectDetails, resolution.Outcome)
}

// randomFeeUpdateTimeout returns a random timeout between the bounds defined
// within the link's configuration that will be used to determine when the link
// should propose an update to its commitment fee rate.
func (l *channelLink) randomFeeUpdateTimeout() time.Duration {
        lower := int64(l.cfg.MinUpdateTimeout)
        upper := int64(l.cfg.MaxUpdateTimeout)
        return time.Duration(prand.Int63n(upper-lower) + lower)
}

// handleDownstreamUpdateAdd processes an UpdateAddHTLC packet sent from the
// downstream HTLC Switch.
func (l *channelLink) handleDownstreamUpdateAdd(ctx context.Context,
        pkt *htlcPacket) error {

        htlc, ok := pkt.htlc.(*lnwire.UpdateAddHTLC)
        if !ok {
                return errors.New("not an UpdateAddHTLC packet")
        }

        // If we are flushing the link in the outgoing direction or we have
        // already sent Stfu, then we can't add new htlcs to the link and we
        // need to bounce it.
        if l.IsFlushing(Outgoing) || !l.quiescer.CanSendUpdates() {
                l.mailBox.FailAdd(pkt)

                return NewDetailedLinkError(
                        &lnwire.FailTemporaryChannelFailure{},
                        OutgoingFailureLinkNotEligible,
                )
        }

        // If hodl.AddOutgoing mode is active, we exit early to simulate
        // arbitrary delays between the switch adding an ADD to the
        // mailbox, and the HTLC being added to the commitment state.
        if l.cfg.HodlMask.Active(hodl.AddOutgoing) {
                l.log.Warnf(hodl.AddOutgoing.Warning())
                l.mailBox.AckPacket(pkt.inKey())
                return nil
        }

        // Check if we can add the HTLC here without exceededing the max fee
        // exposure threshold.
        if l.isOverexposedWithHtlc(htlc, false) {
                l.log.Debugf("Unable to handle downstream HTLC - max fee " +
                        "exposure exceeded")

                l.mailBox.FailAdd(pkt)

                return NewDetailedLinkError(
                        lnwire.NewTemporaryChannelFailure(nil),
                        OutgoingFailureDownstreamHtlcAdd,
                )
        }

        // A new payment has been initiated via the downstream channel,
        // so we add the new HTLC to our local log, then update the
        // commitment chains.
        htlc.ChanID = l.ChanID()
        openCircuitRef := pkt.inKey()

        // We enforce the fee buffer for the commitment transaction because
        // we are in control of adding this htlc. Nothing has locked-in yet so
        // we can securely enforce the fee buffer which is only relevant if we
        // are the initiator of the channel.
        index, err := l.channel.AddHTLC(htlc, &openCircuitRef)
        if err != nil {
                // The HTLC was unable to be added to the state machine,
                // as a result, we'll signal the switch to cancel the
                // pending payment.
                l.log.Warnf("Unable to handle downstream add HTLC: %v",
                        err)

                // Remove this packet from the link's mailbox, this
                // prevents it from being reprocessed if the link
                // restarts and resets it mailbox. If this response
                // doesn't make it back to the originating link, it will
                // be rejected upon attempting to reforward the Add to
                // the switch, since the circuit was never fully opened,
                // and the forwarding package shows it as
                // unacknowledged.
                l.mailBox.FailAdd(pkt)

                return NewDetailedLinkError(
                        lnwire.NewTemporaryChannelFailure(nil),
                        OutgoingFailureDownstreamHtlcAdd,
                )
        }

        l.log.Tracef("received downstream htlc: payment_hash=%x, "+
                "local_log_index=%v, pend_updates=%v",
                htlc.PaymentHash[:], index,
                l.channel.NumPendingUpdates(lntypes.Local, lntypes.Remote))

        pkt.outgoingChanID = l.ShortChanID()
        pkt.outgoingHTLCID = index
        htlc.ID = index

        l.log.Debugf("queueing keystone of ADD open circuit: %s->%s",
                pkt.inKey(), pkt.outKey())

        l.openedCircuits = append(l.openedCircuits, pkt.inKey())
        l.keystoneBatch = append(l.keystoneBatch, pkt.keystone())

        err = l.cfg.Peer.SendMessage(false, htlc)
        if err != nil {
                l.log.Errorf("failed to send UpdateAddHTLC: %v", err)
        }

        // Send a forward event notification to htlcNotifier.
        l.cfg.HtlcNotifier.NotifyForwardingEvent(
                newHtlcKey(pkt),
                HtlcInfo{
                        IncomingTimeLock: pkt.incomingTimeout,
                        IncomingAmt:      pkt.incomingAmount,
                        OutgoingTimeLock: htlc.Expiry,
                        OutgoingAmt:      htlc.Amount,
                },
                getEventType(pkt),
        )

        l.tryBatchUpdateCommitTx(ctx)

        return nil
}

// handleDownstreamPkt processes an HTLC packet sent from the downstream HTLC
// Switch. Possible messages sent by the switch include requests to forward new
// HTLCs, timeout previously cleared HTLCs, and finally to settle currently
// cleared HTLCs with the upstream peer.
//
// TODO(roasbeef): add sync ntfn to ensure switch always has consistent view?
func (l *channelLink) handleDownstreamPkt(ctx context.Context,
        pkt *htlcPacket) {

        if pkt.htlc.MsgType().IsChannelUpdate() &&
                !l.quiescer.CanSendUpdates() {

                l.log.Warnf("unable to process channel update. "+
                        "ChannelID=%v is quiescent.", l.ChanID)

                return
        }

        switch htlc := pkt.htlc.(type) {
        case *lnwire.UpdateAddHTLC:
                // Handle add message. The returned error can be ignored,
                // because it is also sent through the mailbox.
                _ = l.handleDownstreamUpdateAdd(ctx, pkt)

        case *lnwire.UpdateFulfillHTLC:
                l.processLocalUpdateFulfillHTLC(ctx, pkt, htlc)

        case *lnwire.UpdateFailHTLC:
                l.processLocalUpdateFailHTLC(ctx, pkt, htlc)
        }
}

// tryBatchUpdateCommitTx updates the commitment transaction if the batch is
// full.
func (l *channelLink) tryBatchUpdateCommitTx(ctx context.Context) {
        pending := l.channel.NumPendingUpdates(lntypes.Local, lntypes.Remote)
        if pending < uint64(l.cfg.BatchSize) {
                return
        }

        l.updateCommitTxOrFail(ctx)
}

// cleanupSpuriousResponse attempts to ack any AddRef or SettleFailRef
// associated with this packet. If successful in doing so, it will also purge
// the open circuit from the circuit map and remove the packet from the link's
// mailbox.
func (l *channelLink) cleanupSpuriousResponse(pkt *htlcPacket) {
        inKey := pkt.inKey()

        l.log.Debugf("cleaning up spurious response for incoming "+
                "circuit-key=%v", inKey)

        // If the htlc packet doesn't have a source reference, it is unsafe to
        // proceed, as skipping this ack may cause the htlc to be reforwarded.
        if pkt.sourceRef == nil {
                l.log.Errorf("unable to cleanup response for incoming "+
                        "circuit-key=%v, does not contain source reference",
                        inKey)
                return
        }

        // If the source reference is present,  we will try to prevent this link
        // from resending the packet to the switch. To do so, we ack the AddRef
        // of the incoming HTLC belonging to this link.
        err := l.channel.AckAddHtlcs(*pkt.sourceRef)
        if err != nil {
                l.log.Errorf("unable to ack AddRef for incoming "+
                        "circuit-key=%v: %v", inKey, err)

                // If this operation failed, it is unsafe to attempt removal of
                // the destination reference or circuit, so we exit early. The
                // cleanup may proceed with a different packet in the future
                // that succeeds on this step.
                return
        }

        // Now that we know this link will stop retransmitting Adds to the
        // switch, we can begin to teardown the response reference and circuit
        // map.
        //
        // If the packet includes a destination reference, then a response for
        // this HTLC was locked into the outgoing channel. Attempt to remove
        // this reference, so we stop retransmitting the response internally.
        // Even if this fails, we will proceed in trying to delete the circuit.
        // When retransmitting responses, the destination references will be
        // cleaned up if an open circuit is not found in the circuit map.
        if pkt.destRef != nil {
                err := l.channel.AckSettleFails(*pkt.destRef)
                if err != nil {
                        l.log.Errorf("unable to ack SettleFailRef "+
                                "for incoming circuit-key=%v: %v",
                                inKey, err)
                }
        }

        l.log.Debugf("deleting circuit for incoming circuit-key=%x", inKey)

        // With all known references acked, we can now safely delete the circuit
        // from the switch's circuit map, as the state is no longer needed.
        err = l.cfg.Circuits.DeleteCircuits(inKey)
        if err != nil {
                l.log.Errorf("unable to delete circuit for "+
                        "circuit-key=%v: %v", inKey, err)
        }
}

// handleUpstreamMsg processes wire messages related to commitment state
// updates from the upstream peer. The upstream peer is the peer whom we have a
// direct channel with, updating our respective commitment chains.
func (l *channelLink) handleUpstreamMsg(ctx context.Context,
        msg lnwire.Message) {

        l.log.Tracef("receive upstream msg %v, handling now... ", msg.MsgType())
        defer l.log.Tracef("handled upstream msg %v", msg.MsgType())

        // First check if the message is an update and we are capable of
        // receiving updates right now.
        if msg.MsgType().IsChannelUpdate() && !l.quiescer.CanRecvUpdates() {
                l.stfuFailf("update received after stfu: %T", msg)
                return
        }

        var err error

        switch msg := msg.(type) {
        case *lnwire.UpdateAddHTLC:
                err = l.processRemoteUpdateAddHTLC(msg)

        case *lnwire.UpdateFulfillHTLC:
                err = l.processRemoteUpdateFulfillHTLC(msg)

        case *lnwire.UpdateFailMalformedHTLC:
                err = l.processRemoteUpdateFailMalformedHTLC(msg)

        case *lnwire.UpdateFailHTLC:
                err = l.processRemoteUpdateFailHTLC(msg)

        case *lnwire.CommitSig:
                err = l.processRemoteCommitSig(ctx, msg)

        case *lnwire.RevokeAndAck:
                err = l.processRemoteRevokeAndAck(ctx, msg)

        case *lnwire.UpdateFee:
                err = l.processRemoteUpdateFee(msg)

        case *lnwire.Stfu:
                err = l.handleStfu(msg)
                if err != nil {
                        l.stfuFailf("handleStfu: %v", err.Error())
                }

        // In the case where we receive a warning message from our peer, just
        // log it and move on. We choose not to disconnect from our peer,
        // although we "MAY" do so according to the specification.
        case *lnwire.Warning:
                l.log.Warnf("received warning message from peer: %v",
                        msg.Warning())

        case *lnwire.Error:
                l.processRemoteError(msg)

        default:
                l.log.Warnf("received unknown message of type %T", msg)
        }

        if err != nil {
                l.log.Errorf("failed to process remote %v: %v", msg.MsgType(),
                        err)
        }
}

// handleStfu implements the top-level logic for handling the Stfu message from
// our peer.
func (l *channelLink) handleStfu(stfu *lnwire.Stfu) error {
        if !l.noDanglingUpdates(lntypes.Remote) {
                return ErrPendingRemoteUpdates
        }
        err := l.quiescer.RecvStfu(*stfu)
        if err != nil {
                return err
        }

        // If we can immediately send an Stfu response back, we will.
        if l.noDanglingUpdates(lntypes.Local) {
                return l.quiescer.SendOwedStfu()
        }

        return nil
}

// stfuFailf fails the link in the case where the requirements of the quiescence
// protocol are violated. In all cases we opt to drop the connection as only
// link state (as opposed to channel state) is affected.
func (l *channelLink) stfuFailf(format string, args ...interface{}) {
        l.failf(LinkFailureError{
                code:             ErrStfuViolation,
                FailureAction:    LinkFailureDisconnect,
                PermanentFailure: false,
                Warning:          true,
        }, format, args...)
}

// noDanglingUpdates returns true when there are 0 updates that were originally
// issued by whose on either the Local or Remote commitment transaction.
func (l *channelLink) noDanglingUpdates(whose lntypes.ChannelParty) bool {
        pendingOnLocal := l.channel.NumPendingUpdates(
                whose, lntypes.Local,
        )
        pendingOnRemote := l.channel.NumPendingUpdates(
                whose, lntypes.Remote,
        )

        return pendingOnLocal == 0 && pendingOnRemote == 0
}

// ackDownStreamPackets is responsible for removing htlcs from a link's mailbox
// for packets delivered from server, and cleaning up any circuits closed by
// signing a previous commitment txn. This method ensures that the circuits are
// removed from the circuit map before removing them from the link's mailbox,
// otherwise it could be possible for some circuit to be missed if this link
// flaps.
func (l *channelLink) ackDownStreamPackets() error {
        // First, remove the downstream Add packets that were included in the
        // previous commitment signature. This will prevent the Adds from being
        // replayed if this link disconnects.
        for _, inKey := range l.openedCircuits {
                // In order to test the sphinx replay logic of the remote
                // party, unsafe replay does not acknowledge the packets from
                // the mailbox. We can then force a replay of any Add packets
                // held in memory by disconnecting and reconnecting the link.
                if l.cfg.UnsafeReplay {
                        continue
                }

                l.log.Debugf("removing Add packet %s from mailbox", inKey)
                l.mailBox.AckPacket(inKey)
        }

        // Now, we will delete all circuits closed by the previous commitment
        // signature, which is the result of downstream Settle/Fail packets. We
        // batch them here to ensure circuits are closed atomically and for
        // performance.
        err := l.cfg.Circuits.DeleteCircuits(l.closedCircuits...)
        switch err {
        case nil:
                // Successful deletion.

        default:
                l.log.Errorf("unable to delete %d circuits: %v",
                        len(l.closedCircuits), err)
                return err
        }

        // With the circuits removed from memory and disk, we now ack any
        // Settle/Fails in the mailbox to ensure they do not get redelivered
        // after startup. If forgive is enabled and we've reached this point,
        // the circuits must have been removed at some point, so it is now safe
        // to un-queue the corresponding Settle/Fails.
        for _, inKey := range l.closedCircuits {
                l.log.Debugf("removing Fail/Settle packet %s from mailbox",
                        inKey)
                l.mailBox.AckPacket(inKey)
        }

        // Lastly, reset our buffers to be empty while keeping any acquired
        // growth in the backing array.
        l.openedCircuits = l.openedCircuits[:0]
        l.closedCircuits = l.closedCircuits[:0]

        return nil
}

// updateCommitTxOrFail updates the commitment tx and if that fails, it fails
// the link.
func (l *channelLink) updateCommitTxOrFail(ctx context.Context) bool {
        err := l.updateCommitTx(ctx)
        switch {
        // No error encountered, success.
        case err == nil:

        // A duplicate keystone error should be resolved and is not fatal, so
        // we won't send an Error message to the peer.
        case errors.Is(err, ErrDuplicateKeystone):
                l.failf(LinkFailureError{code: ErrCircuitError},
                        "temporary circuit error: %v", err)
                return false

        // Any other error is treated results in an Error message being sent to
        // the peer.
        default:
                l.failf(LinkFailureError{code: ErrInternalError},
                        "unable to update commitment: %v", err)
                return false
        }

        return true
}

// updateCommitTx signs, then sends an update to the remote peer adding a new
// commitment to their commitment chain which includes all the latest updates
// we've received+processed up to this point.
func (l *channelLink) updateCommitTx(ctx context.Context) error {
        // Preemptively write all pending keystones to disk, just in case the
        // HTLCs we have in memory are included in the subsequent attempt to
        // sign a commitment state.
        err := l.cfg.Circuits.OpenCircuits(l.keystoneBatch...)
        if err != nil {
                // If ErrDuplicateKeystone is returned, the caller will catch
                // it.
                return err
        }

        // Reset the batch, but keep the backing buffer to avoid reallocating.
        l.keystoneBatch = l.keystoneBatch[:0]

        // If hodl.Commit mode is active, we will refrain from attempting to
        // commit any in-memory modifications to the channel state. Exiting here
        // permits testing of either the switch or link's ability to trim
        // circuits that have been opened, but unsuccessfully committed.
        if l.cfg.HodlMask.Active(hodl.Commit) {
                l.log.Warnf(hodl.Commit.Warning())
                return nil
        }

        ctx, done := l.cg.Create(ctx)
        defer done()

        newCommit, err := l.channel.SignNextCommitment(ctx)
        if err == lnwallet.ErrNoWindow {
                l.cfg.PendingCommitTicker.Resume()
                l.log.Trace("PendingCommitTicker resumed")

                n := l.channel.NumPendingUpdates(lntypes.Local, lntypes.Remote)
                l.log.Tracef("revocation window exhausted, unable to send: "+
                        "%v, pend_updates=%v, dangling_closes%v", n,
                        lnutils.SpewLogClosure(l.openedCircuits),
                        lnutils.SpewLogClosure(l.closedCircuits))

                return nil
        } else if err != nil {
                return err
        }

        if err := l.ackDownStreamPackets(); err != nil {
                return err
        }

        l.cfg.PendingCommitTicker.Pause()
        l.log.Trace("PendingCommitTicker paused after ackDownStreamPackets")

        // The remote party now has a new pending commitment, so we'll update
        // the contract court to be aware of this new set (the prior old remote
        // pending).
        newUpdate := &contractcourt.ContractUpdate{
                HtlcKey: contractcourt.RemotePendingHtlcSet,
                Htlcs:   newCommit.PendingHTLCs,
        }
        err = l.cfg.NotifyContractUpdate(newUpdate)
        if err != nil {
                l.log.Errorf("unable to notify contract update: %v", err)
                return err
        }

        select {
        case <-l.cg.Done():
                return ErrLinkShuttingDown
        default:
        }

        auxBlobRecords, err := lnwire.ParseCustomRecords(newCommit.AuxSigBlob)
        if err != nil {
                return fmt.Errorf("error parsing aux sigs: %w", err)
        }

        commitSig := &lnwire.CommitSig{
                ChanID:        l.ChanID(),
                CommitSig:     newCommit.CommitSig,
                HtlcSigs:      newCommit.HtlcSigs,
                PartialSig:    newCommit.PartialSig,
                CustomRecords: auxBlobRecords,
        }
        err = l.cfg.Peer.SendMessage(false, commitSig)
        if err != nil {
                l.log.Errorf("failed to send CommitSig: %v", err)
        }

        // Now that we have sent out a new CommitSig, we invoke the outgoing set
        // of commit hooks.
        l.RWMutex.Lock()
        l.outgoingCommitHooks.invoke()
        l.RWMutex.Unlock()

        return nil
}

// Peer returns the representation of remote peer with which we have the
// channel link opened.
//
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) PeerPubKey() [33]byte {
        return l.cfg.Peer.PubKey()
}

// ChannelPoint returns the channel outpoint for the channel link.
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) ChannelPoint() wire.OutPoint {
        return l.channel.ChannelPoint()
}

// ShortChanID returns the short channel ID for the channel link. The short
// channel ID encodes the exact location in the main chain that the original
// funding output can be found.
//
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) ShortChanID() lnwire.ShortChannelID {
        l.RLock()
        defer l.RUnlock()

        return l.channel.ShortChanID()
}

// UpdateShortChanID updates the short channel ID for a link. This may be
// required in the event that a link is created before the short chan ID for it
// is known, or a re-org occurs, and the funding transaction changes location
// within the chain.
//
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) UpdateShortChanID() (lnwire.ShortChannelID, error) {
        chanID := l.ChanID()

        // Refresh the channel state's short channel ID by loading it from disk.
        // This ensures that the channel state accurately reflects the updated
        // short channel ID.
        err := l.channel.State().Refresh()
        if err != nil {
                l.log.Errorf("unable to refresh short_chan_id for chan_id=%v: "+
                        "%v", chanID, err)
                return hop.Source, err
        }

        return hop.Source, nil
}

// ChanID returns the channel ID for the channel link. The channel ID is a more
// compact representation of a channel's full outpoint.
//
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) ChanID() lnwire.ChannelID {
        return lnwire.NewChanIDFromOutPoint(l.channel.ChannelPoint())
}

// Bandwidth returns the total amount that can flow through the channel link at
// this given instance. The value returned is expressed in millisatoshi and can
// be used by callers when making forwarding decisions to determine if a link
// can accept an HTLC.
//
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) Bandwidth() lnwire.MilliSatoshi {
        // Get the balance available on the channel for new HTLCs. This takes
        // the channel reserve into account so HTLCs up to this value won't
        // violate it.
        return l.channel.AvailableBalance()
}

// MayAddOutgoingHtlc indicates whether we can add an outgoing htlc with the
// amount provided to the link. This check does not reserve a space, since
// forwards or other payments may use the available slot, so it should be
// considered best-effort.
func (l *channelLink) MayAddOutgoingHtlc(amt lnwire.MilliSatoshi) error {
        return l.channel.MayAddOutgoingHtlc(amt)
}

// getDustSum is a wrapper method that calls the underlying channel's dust sum
// method.
//
// NOTE: Part of the dustHandler interface.
func (l *channelLink) getDustSum(whoseCommit lntypes.ChannelParty,
        dryRunFee fn.Option[chainfee.SatPerKWeight]) lnwire.MilliSatoshi {

        return l.channel.GetDustSum(whoseCommit, dryRunFee)
}

// getFeeRate is a wrapper method that retrieves the underlying channel's
// feerate.
//
// NOTE: Part of the dustHandler interface.
func (l *channelLink) getFeeRate() chainfee.SatPerKWeight {
        return l.channel.CommitFeeRate()
}

// getDustClosure returns a closure that can be used by the switch or mailbox
// to evaluate whether a given HTLC is dust.
//
// NOTE: Part of the dustHandler interface.
func (l *channelLink) getDustClosure() dustClosure {
        localDustLimit := l.channel.State().LocalChanCfg.DustLimit
        remoteDustLimit := l.channel.State().RemoteChanCfg.DustLimit
        chanType := l.channel.State().ChanType

        return dustHelper(chanType, localDustLimit, remoteDustLimit)
}

// getCommitFee returns either the local or remote CommitFee in satoshis. This
// is used so that the Switch can have access to the commitment fee without
// needing to have a *LightningChannel. This doesn't include dust.
//
// NOTE: Part of the dustHandler interface.
func (l *channelLink) getCommitFee(remote bool) btcutil.Amount {
        if remote {
                return l.channel.State().RemoteCommitment.CommitFee
        }

        return l.channel.State().LocalCommitment.CommitFee
}

// exceedsFeeExposureLimit returns whether or not the new proposed fee-rate
// increases the total dust and fees within the channel past the configured
// fee threshold. It first calculates the dust sum over every update in the
// update log with the proposed fee-rate and taking into account both the local
// and remote dust limits. It uses every update in the update log instead of
// what is actually on the local and remote commitments because it is assumed
// that in a worst-case scenario, every update in the update log could
// theoretically be on either commitment transaction and this needs to be
// accounted for with this fee-rate. It then calculates the local and remote
// commitment fees given the proposed fee-rate. Finally, it tallies the results
// and determines if the fee threshold has been exceeded.
func (l *channelLink) exceedsFeeExposureLimit(
        feePerKw chainfee.SatPerKWeight) (bool, error) {

        dryRunFee := fn.Some[chainfee.SatPerKWeight](feePerKw)

        // Get the sum of dust for both the local and remote commitments using
        // this "dry-run" fee.
        localDustSum := l.getDustSum(lntypes.Local, dryRunFee)
        remoteDustSum := l.getDustSum(lntypes.Remote, dryRunFee)

        // Calculate the local and remote commitment fees using this dry-run
        // fee.
        localFee, remoteFee, err := l.channel.CommitFeeTotalAt(feePerKw)
        if err != nil {
                return false, err
        }

        // Finally, check whether the max fee exposure was exceeded on either
        // future commitment transaction with the fee-rate.
        totalLocalDust := localDustSum + lnwire.NewMSatFromSatoshis(localFee)
        if totalLocalDust > l.cfg.MaxFeeExposure {
                l.log.Debugf("ChannelLink(%v): exceeds fee exposure limit: "+
                        "local dust: %v, local fee: %v", l.ShortChanID(),
                        totalLocalDust, localFee)

                return true, nil
        }

        totalRemoteDust := remoteDustSum + lnwire.NewMSatFromSatoshis(
                remoteFee,
        )

        if totalRemoteDust > l.cfg.MaxFeeExposure {
                l.log.Debugf("ChannelLink(%v): exceeds fee exposure limit: "+
                        "remote dust: %v, remote fee: %v", l.ShortChanID(),
                        totalRemoteDust, remoteFee)

                return true, nil
        }

        return false, nil
}

// isOverexposedWithHtlc calculates whether the proposed HTLC will make the
// channel exceed the fee threshold. It first fetches the largest fee-rate that
// may be on any unrevoked commitment transaction. Then, using this fee-rate,
// determines if the to-be-added HTLC is dust. If the HTLC is dust, it adds to
// the overall dust sum. If it is not dust, it contributes to weight, which
// also adds to the overall dust sum by an increase in fees. If the dust sum on
// either commitment exceeds the configured fee threshold, this function
// returns true.
func (l *channelLink) isOverexposedWithHtlc(htlc *lnwire.UpdateAddHTLC,
        incoming bool) bool {

        dustClosure := l.getDustClosure()

        feeRate := l.channel.WorstCaseFeeRate()

        amount := htlc.Amount.ToSatoshis()

        // See if this HTLC is dust on both the local and remote commitments.
        isLocalDust := dustClosure(feeRate, incoming, lntypes.Local, amount)
        isRemoteDust := dustClosure(feeRate, incoming, lntypes.Remote, amount)

        // Calculate the dust sum for the local and remote commitments.
        localDustSum := l.getDustSum(
                lntypes.Local, fn.None[chainfee.SatPerKWeight](),
        )
        remoteDustSum := l.getDustSum(
                lntypes.Remote, fn.None[chainfee.SatPerKWeight](),
        )

        // Grab the larger of the local and remote commitment fees w/o dust.
        commitFee := l.getCommitFee(false)

        if l.getCommitFee(true) > commitFee {
                commitFee = l.getCommitFee(true)
        }

        commitFeeMSat := lnwire.NewMSatFromSatoshis(commitFee)

        localDustSum += commitFeeMSat
        remoteDustSum += commitFeeMSat

        // Calculate the additional fee increase if this is a non-dust HTLC.
        weight := lntypes.WeightUnit(input.HTLCWeight)
        additional := lnwire.NewMSatFromSatoshis(
                feeRate.FeeForWeight(weight),
        )

        if isLocalDust {
                // If this is dust, it doesn't contribute to weight but does
                // contribute to the overall dust sum.
                localDustSum += lnwire.NewMSatFromSatoshis(amount)
        } else {
                // Account for the fee increase that comes with an increase in
                // weight.
                localDustSum += additional
        }

        if localDustSum > l.cfg.MaxFeeExposure {
                // The max fee exposure was exceeded.
                l.log.Debugf("ChannelLink(%v): HTLC %v makes the channel "+
                        "overexposed, total local dust: %v (current commit "+
                        "fee: %v)", l.ShortChanID(), htlc, localDustSum)

                return true
        }

        if isRemoteDust {
                // If this is dust, it doesn't contribute to weight but does
                // contribute to the overall dust sum.
                remoteDustSum += lnwire.NewMSatFromSatoshis(amount)
        } else {
                // Account for the fee increase that comes with an increase in
                // weight.
                remoteDustSum += additional
        }

        if remoteDustSum > l.cfg.MaxFeeExposure {
                // The max fee exposure was exceeded.
                l.log.Debugf("ChannelLink(%v): HTLC %v makes the channel "+
                        "overexposed, total remote dust: %v (current commit "+
                        "fee: %v)", l.ShortChanID(), htlc, remoteDustSum)

                return true
        }

        return false
}

// dustClosure is a function that evaluates whether an HTLC is dust. It returns
// true if the HTLC is dust. It takes in a feerate, a boolean denoting whether
// the HTLC is incoming (i.e. one that the remote sent), a boolean denoting
// whether to evaluate on the local or remote commit, and finally an HTLC
// amount to test.
type dustClosure func(feerate chainfee.SatPerKWeight, incoming bool,
        whoseCommit lntypes.ChannelParty, amt btcutil.Amount) bool

// dustHelper is used to construct the dustClosure.
func dustHelper(chantype channeldb.ChannelType, localDustLimit,
        remoteDustLimit btcutil.Amount) dustClosure {

        isDust := func(feerate chainfee.SatPerKWeight, incoming bool,
                whoseCommit lntypes.ChannelParty, amt btcutil.Amount) bool {

                var dustLimit btcutil.Amount
                if whoseCommit.IsLocal() {
                        dustLimit = localDustLimit
                } else {
                        dustLimit = remoteDustLimit
                }

                return lnwallet.HtlcIsDust(
                        chantype, incoming, whoseCommit, feerate, amt,
                        dustLimit,
                )
        }

        return isDust
}

// zeroConfConfirmed returns whether or not the zero-conf channel has
// confirmed on-chain.
//
// Part of the scidAliasHandler interface.
func (l *channelLink) zeroConfConfirmed() bool {
        return l.channel.State().ZeroConfConfirmed()
}

// confirmedScid returns the confirmed SCID for a zero-conf channel. This
// should not be called for non-zero-conf channels.
//
// Part of the scidAliasHandler interface.
func (l *channelLink) confirmedScid() lnwire.ShortChannelID {
        return l.channel.State().ZeroConfRealScid()
}

// isZeroConf returns whether or not the underlying channel is a zero-conf
// channel.
//
// Part of the scidAliasHandler interface.
func (l *channelLink) isZeroConf() bool {
        return l.channel.State().IsZeroConf()
}

// negotiatedAliasFeature returns whether or not the underlying channel has
// negotiated the option-scid-alias feature bit. This will be true for both
// option-scid-alias and zero-conf channel-types. It will also be true for
// channels with the feature bit but without the above channel-types.
//
// Part of the scidAliasFeature interface.
func (l *channelLink) negotiatedAliasFeature() bool {
        return l.channel.State().NegotiatedAliasFeature()
}

// getAliases returns the set of aliases for the underlying channel.
//
// Part of the scidAliasHandler interface.
func (l *channelLink) getAliases() []lnwire.ShortChannelID {
        return l.cfg.GetAliases(l.ShortChanID())
}

// attachFailAliasUpdate sets the link's FailAliasUpdate function.
//
// Part of the scidAliasHandler interface.
func (l *channelLink) attachFailAliasUpdate(closure func(
        sid lnwire.ShortChannelID, incoming bool) *lnwire.ChannelUpdate1) {

        l.Lock()
        l.cfg.FailAliasUpdate = closure
        l.Unlock()
}

// AttachMailBox updates the current mailbox used by this link, and hooks up
// the mailbox's message and packet outboxes to the link's upstream and
// downstream chans, respectively.
func (l *channelLink) AttachMailBox(mailbox MailBox) {
        l.Lock()
        l.mailBox = mailbox
        l.upstream = mailbox.MessageOutBox()
        l.downstream = mailbox.PacketOutBox()
        l.Unlock()

        // Set the mailbox's fee rate. This may be refreshing a feerate that was
        // never committed.
        l.mailBox.SetFeeRate(l.getFeeRate())

        // Also set the mailbox's dust closure so that it can query whether HTLC's
        // are dust given the current feerate.
        l.mailBox.SetDustClosure(l.getDustClosure())
}

// UpdateForwardingPolicy updates the forwarding policy for the target
// ChannelLink. Once updated, the link will use the new forwarding policy to
// govern if it an incoming HTLC should be forwarded or not. We assume that
// fields that are zero are intentionally set to zero, so we'll use newPolicy to
// update all of the link's FwrdingPolicy's values.
//
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) UpdateForwardingPolicy(
        newPolicy models.ForwardingPolicy) {

        l.Lock()
        defer l.Unlock()

        l.cfg.FwrdingPolicy = newPolicy
}

// CheckHtlcForward should return a nil error if the passed HTLC details
// satisfy the current forwarding policy fo the target link. Otherwise,
// a LinkError with a valid protocol failure message should be returned
// in order to signal to the source of the HTLC, the policy consistency
// issue.
//
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) CheckHtlcForward(payHash [32]byte, incomingHtlcAmt,
        amtToForward lnwire.MilliSatoshi, incomingTimeout,
        outgoingTimeout uint32, inboundFee models.InboundFee,
        heightNow uint32, originalScid lnwire.ShortChannelID,
        customRecords lnwire.CustomRecords) *LinkError {

        l.RLock()
        policy := l.cfg.FwrdingPolicy
        l.RUnlock()

        // Using the outgoing HTLC amount, we'll calculate the outgoing
        // fee this incoming HTLC must carry in order to satisfy the constraints
        // of the outgoing link.
        outFee := ExpectedFee(policy, amtToForward)

        // Then calculate the inbound fee that we charge based on the sum of
        // outgoing HTLC amount and outgoing fee.
        inFee := inboundFee.CalcFee(amtToForward + outFee)

        // Add up both fee components. It is important to calculate both fees
        // separately. An alternative way of calculating is to first determine
        // an aggregate fee and apply that to the outgoing HTLC amount. However,
        // rounding may cause the result to be slightly higher than in the case
        // of separately rounded fee components. This potentially causes failed
        // forwards for senders and is something to be avoided.
        expectedFee := inFee + int64(outFee)

        // If the actual fee is less than our expected fee, then we'll reject
        // this HTLC as it didn't provide a sufficient amount of fees, or the
        // values have been tampered with, or the send used incorrect/dated
        // information to construct the forwarding information for this hop. In
        // any case, we'll cancel this HTLC.
        actualFee := int64(incomingHtlcAmt) - int64(amtToForward)
        if incomingHtlcAmt < amtToForward || actualFee < expectedFee {
                l.log.Warnf("outgoing htlc(%x) has insufficient fee: "+
                        "expected %v, got %v: incoming=%v, outgoing=%v, "+
                        "inboundFee=%v",
                        payHash[:], expectedFee, actualFee,
                        incomingHtlcAmt, amtToForward, inboundFee,
                )

                // As part of the returned error, we'll send our latest routing
                // policy so the sending node obtains the most up to date data.
                cb := func(upd *lnwire.ChannelUpdate1) lnwire.FailureMessage {
                        return lnwire.NewFeeInsufficient(amtToForward, *upd)
                }
                failure := l.createFailureWithUpdate(false, originalScid, cb)
                return NewLinkError(failure)
        }

        // Check whether the outgoing htlc satisfies the channel policy.
        err := l.canSendHtlc(
                policy, payHash, amtToForward, outgoingTimeout, heightNow,
                originalScid, customRecords,
        )
        if err != nil {
                return err
        }

        // Finally, we'll ensure that the time-lock on the outgoing HTLC meets
        // the following constraint: the incoming time-lock minus our time-lock
        // delta should equal the outgoing time lock. Otherwise, whether the
        // sender messed up, or an intermediate node tampered with the HTLC.
        timeDelta := policy.TimeLockDelta
        if incomingTimeout < outgoingTimeout+timeDelta {
                l.log.Warnf("incoming htlc(%x) has incorrect time-lock value: "+
                        "expected at least %v block delta, got %v block delta",
                        payHash[:], timeDelta, incomingTimeout-outgoingTimeout)

                // Grab the latest routing policy so the sending node is up to
                // date with our current policy.
                cb := func(upd *lnwire.ChannelUpdate1) lnwire.FailureMessage {
                        return lnwire.NewIncorrectCltvExpiry(
                                incomingTimeout, *upd,
                        )
                }
                failure := l.createFailureWithUpdate(false, originalScid, cb)
                return NewLinkError(failure)
        }

        return nil
}

// CheckHtlcTransit should return a nil error if the passed HTLC details
// satisfy the current channel policy.  Otherwise, a LinkError with a
// valid protocol failure message should be returned in order to signal
// the violation. This call is intended to be used for locally initiated
// payments for which there is no corresponding incoming htlc.
func (l *channelLink) CheckHtlcTransit(payHash [32]byte,
        amt lnwire.MilliSatoshi, timeout uint32, heightNow uint32,
        customRecords lnwire.CustomRecords) *LinkError {

        l.RLock()
        policy := l.cfg.FwrdingPolicy
        l.RUnlock()

        // We pass in hop.Source here as this is only used in the Switch when
        // trying to send over a local link. This causes the fallback mechanism
        // to occur.
        return l.canSendHtlc(
                policy, payHash, amt, timeout, heightNow, hop.Source,
                customRecords,
        )
}

// canSendHtlc checks whether the given htlc parameters satisfy
// the channel's amount and time lock constraints.
func (l *channelLink) canSendHtlc(policy models.ForwardingPolicy,
        payHash [32]byte, amt lnwire.MilliSatoshi, timeout uint32,
        heightNow uint32, originalScid lnwire.ShortChannelID,
        customRecords lnwire.CustomRecords) *LinkError {

        // As our first sanity check, we'll ensure that the passed HTLC isn't
        // too small for the next hop. If so, then we'll cancel the HTLC
        // directly.
        if amt < policy.MinHTLCOut {
                l.log.Warnf("outgoing htlc(%x) is too small: min_htlc=%v, "+
                        "htlc_value=%v", payHash[:], policy.MinHTLCOut,
                        amt)

                // As part of the returned error, we'll send our latest routing
                // policy so the sending node obtains the most up to date data.
                cb := func(upd *lnwire.ChannelUpdate1) lnwire.FailureMessage {
                        return lnwire.NewAmountBelowMinimum(amt, *upd)
                }
                failure := l.createFailureWithUpdate(false, originalScid, cb)
                return NewLinkError(failure)
        }

        // Next, ensure that the passed HTLC isn't too large. If so, we'll
        // cancel the HTLC directly.
        if policy.MaxHTLC != 0 && amt > policy.MaxHTLC {
                l.log.Warnf("outgoing htlc(%x) is too large: max_htlc=%v, "+
                        "htlc_value=%v", payHash[:], policy.MaxHTLC, amt)

                // As part of the returned error, we'll send our latest routing
                // policy so the sending node obtains the most up-to-date data.
                cb := func(upd *lnwire.ChannelUpdate1) lnwire.FailureMessage {
                        return lnwire.NewTemporaryChannelFailure(upd)
                }
                failure := l.createFailureWithUpdate(false, originalScid, cb)
                return NewDetailedLinkError(failure, OutgoingFailureHTLCExceedsMax)
        }

        // We want to avoid offering an HTLC which will expire in the near
        // future, so we'll reject an HTLC if the outgoing expiration time is
        // too close to the current height.
        if timeout <= heightNow+l.cfg.OutgoingCltvRejectDelta {
                l.log.Warnf("htlc(%x) has an expiry that's too soon: "+
                        "outgoing_expiry=%v, best_height=%v", payHash[:],
                        timeout, heightNow)

                cb := func(upd *lnwire.ChannelUpdate1) lnwire.FailureMessage {
                        return lnwire.NewExpiryTooSoon(*upd)
                }
                failure := l.createFailureWithUpdate(false, originalScid, cb)
                return NewLinkError(failure)
        }

        // Check absolute max delta.
        if timeout > l.cfg.MaxOutgoingCltvExpiry+heightNow {
                l.log.Warnf("outgoing htlc(%x) has a time lock too far in "+
                        "the future: got %v, but maximum is %v", payHash[:],
                        timeout-heightNow, l.cfg.MaxOutgoingCltvExpiry)

                return NewLinkError(&lnwire.FailExpiryTooFar{})
        }

        // We now check the available bandwidth to see if this HTLC can be
        // forwarded.
        availableBandwidth := l.Bandwidth()
        auxBandwidth, err := fn.MapOptionZ(
                l.cfg.AuxTrafficShaper,
                func(ts AuxTrafficShaper) fn.Result[OptionalBandwidth] {
                        var htlcBlob fn.Option[tlv.Blob]
                        blob, err := customRecords.Serialize()
                        if err != nil {
                                return fn.Err[OptionalBandwidth](
                                        fmt.Errorf("unable to serialize "+
                                                "custom records: %w", err))
                        }

                        if len(blob) > 0 {
                                htlcBlob = fn.Some(blob)
                        }

                        return l.AuxBandwidth(amt, originalScid, htlcBlob, ts)
                },
        ).Unpack()
        if err != nil {
                l.log.Errorf("Unable to determine aux bandwidth: %v", err)
                return NewLinkError(&lnwire.FailTemporaryNodeFailure{})
        }

        if auxBandwidth.IsHandled && auxBandwidth.Bandwidth.IsSome() {
                auxBandwidth.Bandwidth.WhenSome(
                        func(bandwidth lnwire.MilliSatoshi) {
                                availableBandwidth = bandwidth
                        },
                )
        }

        // Check to see if there is enough balance in this channel.
        if amt > availableBandwidth {
                l.log.Warnf("insufficient bandwidth to route htlc: %v is "+
                        "larger than %v", amt, availableBandwidth)
                cb := func(upd *lnwire.ChannelUpdate1) lnwire.FailureMessage {
                        return lnwire.NewTemporaryChannelFailure(upd)
                }
                failure := l.createFailureWithUpdate(false, originalScid, cb)
                return NewDetailedLinkError(
                        failure, OutgoingFailureInsufficientBalance,
                )
        }

        return nil
}

// AuxBandwidth returns the bandwidth that can be used for a channel, expressed
// in milli-satoshi. This might be different from the regular BTC bandwidth for
// custom channels. This will always return fn.None() for a regular (non-custom)
// channel.
func (l *channelLink) AuxBandwidth(amount lnwire.MilliSatoshi,
        cid lnwire.ShortChannelID, htlcBlob fn.Option[tlv.Blob],
        ts AuxTrafficShaper) fn.Result[OptionalBandwidth] {

        fundingBlob := l.FundingCustomBlob()
        shouldHandle, err := ts.ShouldHandleTraffic(cid, fundingBlob, htlcBlob)
        if err != nil {
                return fn.Err[OptionalBandwidth](fmt.Errorf("traffic shaper "+
                        "failed to decide whether to handle traffic: %w", err))
        }

        log.Debugf("ShortChannelID=%v: aux traffic shaper is handling "+
                "traffic: %v", cid, shouldHandle)

        // If this channel isn't handled by the aux traffic shaper, we'll return
        // early.
        if !shouldHandle {
                return fn.Ok(OptionalBandwidth{
                        IsHandled: false,
                })
        }

        peerBytes := l.cfg.Peer.PubKey()

        peer, err := route.NewVertexFromBytes(peerBytes[:])
        if err != nil {
                return fn.Err[OptionalBandwidth](fmt.Errorf("failed to decode "+
                        "peer pub key: %v", err))
        }

        // Ask for a specific bandwidth to be used for the channel.
        commitmentBlob := l.CommitmentCustomBlob()
        auxBandwidth, err := ts.PaymentBandwidth(
                fundingBlob, htlcBlob, commitmentBlob, l.Bandwidth(), amount,
                l.channel.FetchLatestAuxHTLCView(), peer,
        )
        if err != nil {
                return fn.Err[OptionalBandwidth](fmt.Errorf("failed to get "+
                        "bandwidth from external traffic shaper: %w", err))
        }

        log.Debugf("ShortChannelID=%v: aux traffic shaper reported available "+
                "bandwidth: %v", cid, auxBandwidth)

        return fn.Ok(OptionalBandwidth{
                IsHandled: true,
                Bandwidth: fn.Some(auxBandwidth),
        })
}

// Stats returns the statistics of channel link.
//
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) Stats() (uint64, lnwire.MilliSatoshi, lnwire.MilliSatoshi) {
        snapshot := l.channel.StateSnapshot()

        return snapshot.ChannelCommitment.CommitHeight,
                snapshot.TotalMSatSent,
                snapshot.TotalMSatReceived
}

// String returns the string representation of channel link.
//
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) String() string {
        return l.channel.ChannelPoint().String()
}

// handleSwitchPacket handles the switch packets. This packets which might be
// forwarded to us from another channel link in case the htlc update came from
// another peer or if the update was created by user
//
// NOTE: Part of the packetHandler interface.
func (l *channelLink) handleSwitchPacket(pkt *htlcPacket) error {
        l.log.Tracef("received switch packet inkey=%v, outkey=%v",
                pkt.inKey(), pkt.outKey())

        return l.mailBox.AddPacket(pkt)
}

// HandleChannelUpdate handles the htlc requests as settle/add/fail which sent
// to us from remote peer we have a channel with.
//
// NOTE: Part of the ChannelLink interface.
func (l *channelLink) HandleChannelUpdate(message lnwire.Message) {
        select {
        case <-l.cg.Done():
                // Return early if the link is already in the process of
                // quitting. It doesn't make sense to hand the message to the
                // mailbox here.
                return
        default:
        }

        err := l.mailBox.AddMessage(message)
        if err != nil {
                l.log.Errorf("failed to add Message to mailbox: %v", err)
        }
}

// updateChannelFee updates the commitment fee-per-kw on this channel by
// committing to an update_fee message.
func (l *channelLink) updateChannelFee(ctx context.Context,
        feePerKw chainfee.SatPerKWeight) error {

        l.log.Infof("updating commit fee to %v", feePerKw)

        // We skip sending the UpdateFee message if the channel is not
        // currently eligible to forward messages.
        if !l.eligibleToUpdate() {
                l.log.Debugf("skipping fee update for inactive channel")
                return nil
        }

        // Check and see if our proposed fee-rate would make us exceed the fee
        // threshold.
        thresholdExceeded, err := l.exceedsFeeExposureLimit(feePerKw)
        if err != nil {
                // This shouldn't typically happen. If it does, it indicates
                // something is wrong with our channel state.
                return err
        }

        if thresholdExceeded {
                return fmt.Errorf("link fee threshold exceeded")
        }

        // First, we'll update the local fee on our commitment.
        if err := l.channel.UpdateFee(feePerKw); err != nil {
                return err
        }

        // The fee passed the channel's validation checks, so we update the
        // mailbox feerate.
        l.mailBox.SetFeeRate(feePerKw)

        // We'll then attempt to send a new UpdateFee message, and also lock it
        // in immediately by triggering a commitment update.
        msg := lnwire.NewUpdateFee(l.ChanID(), uint32(feePerKw))
        if err := l.cfg.Peer.SendMessage(false, msg); err != nil {
                return err
        }

        return l.updateCommitTx(ctx)
}

// processRemoteSettleFails accepts a batch of settle/fail payment descriptors
// after receiving a revocation from the remote party, and reprocesses them in
// the context of the provided forwarding package. Any settles or fails that
// have already been acknowledged in the forwarding package will not be sent to
// the switch.
func (l *channelLink) processRemoteSettleFails(fwdPkg *channeldb.FwdPkg) {
        if len(fwdPkg.SettleFails) == 0 {
                l.log.Trace("fwd package has no settle/fails to process " +
                        "exiting early")

                return
        }

        // Exit early if the fwdPkg is already processed.
        if fwdPkg.State == channeldb.FwdStateCompleted {
                l.log.Debugf("skipped processing completed fwdPkg %v", fwdPkg)

                return
        }

        l.log.Debugf("settle-fail-filter: %v", fwdPkg.SettleFailFilter)

        var switchPackets []*htlcPacket
        for i, update := range fwdPkg.SettleFails {
                destRef := fwdPkg.DestRef(uint16(i))

                // Skip any settles or fails that have already been
                // acknowledged by the incoming link that originated the
                // forwarded Add.
                if fwdPkg.SettleFailFilter.Contains(uint16(i)) {
                        continue
                }

                // TODO(roasbeef): rework log entries to a shared
                // interface.

                switch msg := update.UpdateMsg.(type) {
                // A settle for an HTLC we previously forwarded HTLC has been
                // received. So we'll forward the HTLC to the switch which will
                // handle propagating the settle to the prior hop.
                case *lnwire.UpdateFulfillHTLC:
                        // If hodl.SettleIncoming is requested, we will not
                        // forward the SETTLE to the switch and will not signal
                        // a free slot on the commitment transaction.
                        if l.cfg.HodlMask.Active(hodl.SettleIncoming) {
                                l.log.Warnf(hodl.SettleIncoming.Warning())
                                continue
                        }

                        settlePacket := &htlcPacket{
                                outgoingChanID: l.ShortChanID(),
                                outgoingHTLCID: msg.ID,
                                destRef:        &destRef,
                                htlc:           msg,
                        }

                        // Add the packet to the batch to be forwarded, and
                        // notify the overflow queue that a spare spot has been
                        // freed up within the commitment state.
                        switchPackets = append(switchPackets, settlePacket)

                // A failureCode message for a previously forwarded HTLC has
                // been received. As a result a new slot will be freed up in
                // our commitment state, so we'll forward this to the switch so
                // the backwards undo can continue.
                case *lnwire.UpdateFailHTLC:
                        // If hodl.SettleIncoming is requested, we will not
                        // forward the FAIL to the switch and will not signal a
                        // free slot on the commitment transaction.
                        if l.cfg.HodlMask.Active(hodl.FailIncoming) {
                                l.log.Warnf(hodl.FailIncoming.Warning())
                                continue
                        }

                        // Fetch the reason the HTLC was canceled so we can
                        // continue to propagate it. This failure originated
                        // from another node, so the linkFailure field is not
                        // set on the packet.
                        failPacket := &htlcPacket{
                                outgoingChanID: l.ShortChanID(),
                                outgoingHTLCID: msg.ID,
                                destRef:        &destRef,
                                htlc:           msg,
                        }

                        l.log.Debugf("Failed to send HTLC with ID=%d", msg.ID)

                        // If the failure message lacks an HMAC (but includes
                        // the 4 bytes for encoding the message and padding
                        // lengths, then this means that we received it as an
                        // UpdateFailMalformedHTLC. As a result, we'll signal
                        // that we need to convert this error within the switch
                        // to an actual error, by encrypting it as if we were
                        // the originating hop.
                        convertedErrorSize := lnwire.FailureMessageLength + 4
                        if len(msg.Reason) == convertedErrorSize {
                                failPacket.convertedError = true
                        }

                        // Add the packet to the batch to be forwarded, and
                        // notify the overflow queue that a spare spot has been
                        // freed up within the commitment state.
                        switchPackets = append(switchPackets, failPacket)
                }
        }

        // Only spawn the task forward packets we have a non-zero number.
        if len(switchPackets) > 0 {
                go l.forwardBatch(false, switchPackets...)
        }
}

// processRemoteAdds serially processes each of the Add payment descriptors
// which have been "locked-in" by receiving a revocation from the remote party.
// The forwarding package provided instructs how to process this batch,
// indicating whether this is the first time these Adds are being processed, or
// whether we are reprocessing as a result of a failure or restart. Adds that
// have already been acknowledged in the forwarding package will be ignored.
//
// NOTE: This function needs also be called for fwd packages with no ADDs
// because it marks the fwdPkg as processed by writing the FwdFilter into the
// database.
//
//nolint:funlen
func (l *channelLink) processRemoteAdds(fwdPkg *channeldb.FwdPkg) {
        // Exit early if the fwdPkg is already processed.
        if fwdPkg.State == channeldb.FwdStateCompleted {
                l.log.Debugf("skipped processing completed fwdPkg %v", fwdPkg)

                return
        }

        l.log.Tracef("processing %d remote adds for height %d",
                len(fwdPkg.Adds), fwdPkg.Height)

        // decodeReqs is a list of requests sent to the onion decoder. We expect
        // the same length of responses to be returned.
        decodeReqs := make([]hop.DecodeHopIteratorRequest, 0, len(fwdPkg.Adds))

        // unackedAdds is a list of ADDs that's waiting for the remote's
        // settle/fail update.
        unackedAdds := make([]*lnwire.UpdateAddHTLC, 0, len(fwdPkg.Adds))

        for i, update := range fwdPkg.Adds {
                // If this index is already found in the ack filter, the
                // response to this forwarding decision has already been
                // committed by one of our commitment txns. ADDs in this state
                // are waiting for the rest of the fwding package to get acked
                // before being garbage collected.
                if fwdPkg.State == channeldb.FwdStateProcessed &&
                        fwdPkg.AckFilter.Contains(uint16(i)) {

                        continue
                }

                if msg, ok := update.UpdateMsg.(*lnwire.UpdateAddHTLC); ok {
                        // Before adding the new htlc to the state machine,
                        // parse the onion object in order to obtain the
                        // routing information with DecodeHopIterator function
                        // which process the Sphinx packet.
                        onionReader := bytes.NewReader(msg.OnionBlob[:])

                        req := hop.DecodeHopIteratorRequest{
                                OnionReader:    onionReader,
                                RHash:          msg.PaymentHash[:],
                                IncomingCltv:   msg.Expiry,
                                IncomingAmount: msg.Amount,
                                BlindingPoint:  msg.BlindingPoint,
                        }

                        decodeReqs = append(decodeReqs, req)
                        unackedAdds = append(unackedAdds, msg)
                }
        }

        // If the fwdPkg has already been processed, it means we are
        // reforwarding the packets again, which happens only on a restart.
        reforward := fwdPkg.State == channeldb.FwdStateProcessed

        // Atomically decode the incoming htlcs, simultaneously checking for
        // replay attempts. A particular index in the returned, spare list of
        // channel iterators should only be used if the failure code at the
        // same index is lnwire.FailCodeNone.
        decodeResps, sphinxErr := l.cfg.DecodeHopIterators(
                fwdPkg.ID(), decodeReqs, reforward,
        )
        if sphinxErr != nil {
                l.failf(LinkFailureError{code: ErrInternalError},
                        "unable to decode hop iterators: %v", sphinxErr)
                return
        }

        var switchPackets []*htlcPacket

        for i, update := range unackedAdds {
                idx := uint16(i)
                sourceRef := fwdPkg.SourceRef(idx)
                add := *update

                // An incoming HTLC add has been full-locked in. As a result we
                // can now examine the forwarding details of the HTLC, and the
                // HTLC itself to decide if: we should forward it, cancel it,
                // or are able to settle it (and it adheres to our fee related
                // constraints).

                // Before adding the new htlc to the state machine, parse the
                // onion object in order to obtain the routing information with
                // DecodeHopIterator function which process the Sphinx packet.
                chanIterator, failureCode := decodeResps[i].Result()
                if failureCode != lnwire.CodeNone {
                        // If we're unable to process the onion blob then we
                        // should send the malformed htlc error to payment
                        // sender.
                        l.sendMalformedHTLCError(
                                add.ID, failureCode, add.OnionBlob, &sourceRef,
                        )

                        l.log.Errorf("unable to decode onion hop iterator "+
                                "for htlc(id=%v, hash=%x): %v", add.ID,
                                add.PaymentHash, failureCode)

                        continue
                }

                heightNow := l.cfg.BestHeight()

                pld, routeRole, pldErr := chanIterator.HopPayload()
                if pldErr != nil {
                        // If we're unable to process the onion payload, or we
                        // received invalid onion payload failure, then we
                        // should send an error back to the caller so the HTLC
                        // can be canceled.
                        var failedType uint64

                        // We need to get the underlying error value, so we
                        // can't use errors.As as suggested by the linter.
                        //nolint:errorlint
                        if e, ok := pldErr.(hop.ErrInvalidPayload); ok {
                                failedType = uint64(e.Type)
                        }

                        // If we couldn't parse the payload, make our best
                        // effort at creating an error encrypter that knows
                        // what blinding type we were, but if we couldn't
                        // parse the payload we have no way of knowing whether
                        // we were the introduction node or not.
                        //
                        //nolint:ll
                        obfuscator, failCode := chanIterator.ExtractErrorEncrypter(
                                l.cfg.ExtractErrorEncrypter,
                                // We need our route role here because we
                                // couldn't parse or validate the payload.
                                routeRole == hop.RouteRoleIntroduction,
                        )
                        if failCode != lnwire.CodeNone {
                                l.log.Errorf("could not extract error "+
                                        "encrypter: %v", pldErr)

                                // We can't process this htlc, send back
                                // malformed.
                                l.sendMalformedHTLCError(
                                        add.ID, failureCode, add.OnionBlob,
                                        &sourceRef,
                                )

                                continue
                        }

                        // TODO: currently none of the test unit infrastructure
                        // is setup to handle TLV payloads, so testing this
                        // would require implementing a separate mock iterator
                        // for TLV payloads that also supports injecting invalid
                        // payloads. Deferring this non-trival effort till a
                        // later date
                        failure := lnwire.NewInvalidOnionPayload(failedType, 0)

                        l.sendHTLCError(
                                add, sourceRef, NewLinkError(failure),
                                obfuscator, false,
                        )

                        l.log.Errorf("unable to decode forwarding "+
                                "instructions: %v", pldErr)

                        continue
                }

                // Retrieve onion obfuscator from onion blob in order to
                // produce initial obfuscation of the onion failureCode.
                obfuscator, failureCode := chanIterator.ExtractErrorEncrypter(
                        l.cfg.ExtractErrorEncrypter,
                        routeRole == hop.RouteRoleIntroduction,
                )
                if failureCode != lnwire.CodeNone {
                        // If we're unable to process the onion blob than we
                        // should send the malformed htlc error to payment
                        // sender.
                        l.sendMalformedHTLCError(
                                add.ID, failureCode, add.OnionBlob,
                                &sourceRef,
                        )

                        l.log.Errorf("unable to decode onion "+
                                "obfuscator: %v", failureCode)

                        continue
                }

                fwdInfo := pld.ForwardingInfo()

                // Check whether the payload we've just processed uses our
                // node as the introduction point (gave us a blinding key in
                // the payload itself) and fail it back if we don't support
                // route blinding.
                if fwdInfo.NextBlinding.IsSome() &&
                        l.cfg.DisallowRouteBlinding {

                        failure := lnwire.NewInvalidBlinding(
                                fn.Some(add.OnionBlob),
                        )

                        l.sendHTLCError(
                                add, sourceRef, NewLinkError(failure),
                                obfuscator, false,
                        )

                        l.log.Error("rejected htlc that uses use as an " +
                                "introduction point when we do not support " +
                                "route blinding")

                        continue
                }

                switch fwdInfo.NextHop {
                case hop.Exit:
                        err := l.processExitHop(
                                add, sourceRef, obfuscator, fwdInfo,
                                heightNow, pld,
                        )
                        if err != nil {
                                l.failf(LinkFailureError{
                                        code: ErrInternalError,
                                }, err.Error()) //nolint

                                return
                        }

                // There are additional channels left within this route. So
                // we'll simply do some forwarding package book-keeping.
                default:
                        // If hodl.AddIncoming is requested, we will not
                        // validate the forwarded ADD, nor will we send the
                        // packet to the htlc switch.
                        if l.cfg.HodlMask.Active(hodl.AddIncoming) {
                                l.log.Warnf(hodl.AddIncoming.Warning())
                                continue
                        }

                        endorseValue := l.experimentalEndorsement(
                                record.CustomSet(add.CustomRecords),
                        )
                        endorseType := uint64(
                                lnwire.ExperimentalEndorsementType,
                        )

                        switch fwdPkg.State {
                        case channeldb.FwdStateProcessed:
                                // This add was not forwarded on the previous
                                // processing phase, run it through our
                                // validation pipeline to reproduce an error.
                                // This may trigger a different error due to
                                // expiring timelocks, but we expect that an
                                // error will be reproduced.
                                if !fwdPkg.FwdFilter.Contains(idx) {
                                        break
                                }

                                // Otherwise, it was already processed, we can
                                // can collect it and continue.
                                outgoingAdd := &lnwire.UpdateAddHTLC{
                                        Expiry:        fwdInfo.OutgoingCTLV,
                                        Amount:        fwdInfo.AmountToForward,
                                        PaymentHash:   add.PaymentHash,
                                        BlindingPoint: fwdInfo.NextBlinding,
                                }

                                endorseValue.WhenSome(func(e byte) {
                                        custRecords := map[uint64][]byte{
                                                endorseType: {e},
                                        }

                                        outgoingAdd.CustomRecords = custRecords
                                })

                                // Finally, we'll encode the onion packet for
                                // the _next_ hop using the hop iterator
                                // decoded for the current hop.
                                buf := bytes.NewBuffer(
                                        outgoingAdd.OnionBlob[0:0],
                                )

                                // We know this cannot fail, as this ADD
                                // was marked forwarded in a previous
                                // round of processing.
                                chanIterator.EncodeNextHop(buf)

                                inboundFee := l.cfg.FwrdingPolicy.InboundFee

                                //nolint:ll
                                updatePacket := &htlcPacket{
                                        incomingChanID:       l.ShortChanID(),
                                        incomingHTLCID:       add.ID,
                                        outgoingChanID:       fwdInfo.NextHop,
                                        sourceRef:            &sourceRef,
                                        incomingAmount:       add.Amount,
                                        amount:               outgoingAdd.Amount,
                                        htlc:                 outgoingAdd,
                                        obfuscator:           obfuscator,
                                        incomingTimeout:      add.Expiry,
                                        outgoingTimeout:      fwdInfo.OutgoingCTLV,
                                        inOnionCustomRecords: pld.CustomRecords(),
                                        inboundFee:           inboundFee,
                                        inWireCustomRecords:  add.CustomRecords.Copy(),
                                }
                                switchPackets = append(
                                        switchPackets, updatePacket,
                                )

                                continue
                        }

                        // TODO(roasbeef): ensure don't accept outrageous
                        // timeout for htlc

                        // With all our forwarding constraints met, we'll
                        // create the outgoing HTLC using the parameters as
                        // specified in the forwarding info.
                        addMsg := &lnwire.UpdateAddHTLC{
                                Expiry:        fwdInfo.OutgoingCTLV,
                                Amount:        fwdInfo.AmountToForward,
                                PaymentHash:   add.PaymentHash,
                                BlindingPoint: fwdInfo.NextBlinding,
                        }

                        endorseValue.WhenSome(func(e byte) {
                                addMsg.CustomRecords = map[uint64][]byte{
                                        endorseType: {e},
                                }
                        })

                        // Finally, we'll encode the onion packet for the
                        // _next_ hop using the hop iterator decoded for the
                        // current hop.
                        buf := bytes.NewBuffer(addMsg.OnionBlob[0:0])
                        err := chanIterator.EncodeNextHop(buf)
                        if err != nil {
                                l.log.Errorf("unable to encode the "+
                                        "remaining route %v", err)

                                cb := func(upd *lnwire.ChannelUpdate1) lnwire.FailureMessage { //nolint:ll
                                        return lnwire.NewTemporaryChannelFailure(upd)
                                }

                                failure := l.createFailureWithUpdate(
                                        true, hop.Source, cb,
                                )

                                l.sendHTLCError(
                                        add, sourceRef, NewLinkError(failure),
                                        obfuscator, false,
                                )
                                continue
                        }

                        // Now that this add has been reprocessed, only append
                        // it to our list of packets to forward to the switch
                        // this is the first time processing the add. If the
                        // fwd pkg has already been processed, then we entered
                        // the above section to recreate a previous error.  If
                        // the packet had previously been forwarded, it would
                        // have been added to switchPackets at the top of this
                        // section.
                        if fwdPkg.State == channeldb.FwdStateLockedIn {
                                inboundFee := l.cfg.FwrdingPolicy.InboundFee

                                //nolint:ll
                                updatePacket := &htlcPacket{
                                        incomingChanID:       l.ShortChanID(),
                                        incomingHTLCID:       add.ID,
                                        outgoingChanID:       fwdInfo.NextHop,
                                        sourceRef:            &sourceRef,
                                        incomingAmount:       add.Amount,
                                        amount:               addMsg.Amount,
                                        htlc:                 addMsg,
                                        obfuscator:           obfuscator,
                                        incomingTimeout:      add.Expiry,
                                        outgoingTimeout:      fwdInfo.OutgoingCTLV,
                                        inOnionCustomRecords: pld.CustomRecords(),
                                        inboundFee:           inboundFee,
                                        inWireCustomRecords:  add.CustomRecords.Copy(),
                                }

                                fwdPkg.FwdFilter.Set(idx)
                                switchPackets = append(switchPackets,
                                        updatePacket)
                        }
                }
        }

        // Commit the htlcs we are intending to forward if this package has not
        // been fully processed.
        if fwdPkg.State == channeldb.FwdStateLockedIn {
                err := l.channel.SetFwdFilter(fwdPkg.Height, fwdPkg.FwdFilter)
                if err != nil {
                        l.failf(LinkFailureError{code: ErrInternalError},
                                "unable to set fwd filter: %v", err)
                        return
                }
        }

        if len(switchPackets) == 0 {
                return
        }

        l.log.Debugf("forwarding %d packets to switch: reforward=%v",
                len(switchPackets), reforward)

        // NOTE: This call is made synchronous so that we ensure all circuits
        // are committed in the exact order that they are processed in the link.
        // Failing to do this could cause reorderings/gaps in the range of
        // opened circuits, which violates assumptions made by the circuit
        // trimming.
        l.forwardBatch(reforward, switchPackets...)
}

// experimentalEndorsement returns the value to set for our outgoing
// experimental endorsement field, and a boolean indicating whether it should
// be populated on the outgoing htlc.
func (l *channelLink) experimentalEndorsement(
        customUpdateAdd record.CustomSet) fn.Option[byte] {

        // Only relay experimental signal if we are within the experiment
        // period.
        if !l.cfg.ShouldFwdExpEndorsement() {
                return fn.None[byte]()
        }

        // If we don't have any custom records or the experimental field is
        // not set, just forward a zero value.
        if len(customUpdateAdd) == 0 {
                return fn.Some[byte](lnwire.ExperimentalUnendorsed)
        }

        t := uint64(lnwire.ExperimentalEndorsementType)
        value, set := customUpdateAdd[t]
        if !set {
                return fn.Some[byte](lnwire.ExperimentalUnendorsed)
        }

        // We expect at least one byte for this field, consider it invalid if
        // it has no data and just forward a zero value.
        if len(value) == 0 {
                return fn.Some[byte](lnwire.ExperimentalUnendorsed)
        }

        // Only forward endorsed if the incoming link is endorsed.
        if value[0] == lnwire.ExperimentalEndorsed {
                return fn.Some[byte](lnwire.ExperimentalEndorsed)
        }

        // Forward as unendorsed otherwise, including cases where we've
        // received an invalid value that uses more than 3 bits of information.
        return fn.Some[byte](lnwire.ExperimentalUnendorsed)
}

// processExitHop handles an htlc for which this link is the exit hop. It
// returns a boolean indicating whether the commitment tx needs an update.
func (l *channelLink) processExitHop(add lnwire.UpdateAddHTLC,
        sourceRef channeldb.AddRef, obfuscator hop.ErrorEncrypter,
        fwdInfo hop.ForwardingInfo, heightNow uint32,
        payload invoices.Payload) error {

        // If hodl.ExitSettle is requested, we will not validate the final hop's
        // ADD, nor will we settle the corresponding invoice or respond with the
        // preimage.
        if l.cfg.HodlMask.Active(hodl.ExitSettle) {
                l.log.Warnf("%s for htlc(rhash=%x,htlcIndex=%v)",
                        hodl.ExitSettle.Warning(), add.PaymentHash, add.ID)

                return nil
        }

        // In case the traffic shaper is active, we'll check if the HTLC has
        // custom records and skip the amount check in the onion payload below.
        isCustomHTLC := fn.MapOptionZ(
                l.cfg.AuxTrafficShaper,
                func(ts AuxTrafficShaper) bool {
                        return ts.IsCustomHTLC(add.CustomRecords)
                },
        )

        // As we're the exit hop, we'll double check the hop-payload included in
        // the HTLC to ensure that it was crafted correctly by the sender and
        // is compatible with the HTLC we were extended. If an external
        // validator is active we might bypass the amount check.
        if !isCustomHTLC && add.Amount < fwdInfo.AmountToForward {
                l.log.Errorf("onion payload of incoming htlc(%x) has "+
                        "incompatible value: expected <=%v, got %v",
                        add.PaymentHash, add.Amount, fwdInfo.AmountToForward)

                failure := NewLinkError(
                        lnwire.NewFinalIncorrectHtlcAmount(add.Amount),
                )
                l.sendHTLCError(add, sourceRef, failure, obfuscator, true)

                return nil
        }

        // We'll also ensure that our time-lock value has been computed
        // correctly.
        if add.Expiry < fwdInfo.OutgoingCTLV {
                l.log.Errorf("onion payload of incoming htlc(%x) has "+
                        "incompatible time-lock: expected <=%v, got %v",
                        add.PaymentHash, add.Expiry, fwdInfo.OutgoingCTLV)

                failure := NewLinkError(
                        lnwire.NewFinalIncorrectCltvExpiry(add.Expiry),
                )

                l.sendHTLCError(add, sourceRef, failure, obfuscator, true)

                return nil
        }

        // Notify the invoiceRegistry of the exit hop htlc. If we crash right
        // after this, this code will be re-executed after restart. We will
        // receive back a resolution event.
        invoiceHash := lntypes.Hash(add.PaymentHash)

        circuitKey := models.CircuitKey{
                ChanID: l.ShortChanID(),
                HtlcID: add.ID,
        }

        event, err := l.cfg.Registry.NotifyExitHopHtlc(
                invoiceHash, add.Amount, add.Expiry, int32(heightNow),
                circuitKey, l.hodlQueue.ChanIn(), add.CustomRecords, payload,
        )
        if err != nil {
                return err
        }

        // Create a hodlHtlc struct and decide either resolved now or later.
        htlc := hodlHtlc{
                add:        add,
                sourceRef:  sourceRef,
                obfuscator: obfuscator,
        }

        // If the event is nil, the invoice is being held, so we save payment
        // descriptor for future reference.
        if event == nil {
                l.hodlMap[circuitKey] = htlc
                return nil
        }

        // Process the received resolution.
        return l.processHtlcResolution(event, htlc)
}

// settleHTLC settles the HTLC on the channel.
func (l *channelLink) settleHTLC(preimage lntypes.Preimage,
        htlcIndex uint64, sourceRef channeldb.AddRef) error {

        hash := preimage.Hash()

        l.log.Infof("settling htlc %v as exit hop", hash)

        err := l.channel.SettleHTLC(
                preimage, htlcIndex, &sourceRef, nil, nil,
        )
        if err != nil {
                return fmt.Errorf("unable to settle htlc: %w", err)
        }

        // If the link is in hodl.BogusSettle mode, replace the preimage with a
        // fake one before sending it to the peer.
        if l.cfg.HodlMask.Active(hodl.BogusSettle) {
                l.log.Warnf(hodl.BogusSettle.Warning())
                preimage = [32]byte{}
                copy(preimage[:], bytes.Repeat([]byte{2}, 32))
        }

        // HTLC was successfully settled locally send notification about it
        // remote peer.
        err = l.cfg.Peer.SendMessage(false, &lnwire.UpdateFulfillHTLC{
                ChanID:          l.ChanID(),
                ID:              htlcIndex,
                PaymentPreimage: preimage,
        })
        if err != nil {
                l.log.Errorf("failed to send UpdateFulfillHTLC: %v", err)
        }

        // Once we have successfully settled the htlc, notify a settle event.
        l.cfg.HtlcNotifier.NotifySettleEvent(
                HtlcKey{
                        IncomingCircuit: models.CircuitKey{
                                ChanID: l.ShortChanID(),
                                HtlcID: htlcIndex,
                        },
                },
                preimage,
                HtlcEventTypeReceive,
        )

        return nil
}

// forwardBatch forwards the given htlcPackets to the switch, and waits on the
// err chan for the individual responses. This method is intended to be spawned
// as a goroutine so the responses can be handled in the background.
func (l *channelLink) forwardBatch(replay bool, packets ...*htlcPacket) {
        // Don't forward packets for which we already have a response in our
        // mailbox. This could happen if a packet fails and is buffered in the
        // mailbox, and the incoming link flaps.
        var filteredPkts = make([]*htlcPacket, 0, len(packets))
        for _, pkt := range packets {
                if l.mailBox.HasPacket(pkt.inKey()) {
                        continue
                }

                filteredPkts = append(filteredPkts, pkt)
        }

        err := l.cfg.ForwardPackets(l.cg.Done(), replay, filteredPkts...)
        if err != nil {
                log.Errorf("Unhandled error while reforwarding htlc "+
                        "settle/fail over htlcswitch: %v", err)
        }
}

// sendHTLCError functions cancels HTLC and send cancel message back to the
// peer from which HTLC was received.
func (l *channelLink) sendHTLCError(add lnwire.UpdateAddHTLC,
        sourceRef channeldb.AddRef, failure *LinkError,
        e hop.ErrorEncrypter, isReceive bool) {

        reason, err := e.EncryptFirstHop(failure.WireMessage())
        if err != nil {
                l.log.Errorf("unable to obfuscate error: %v", err)
                return
        }

        err = l.channel.FailHTLC(add.ID, reason, &sourceRef, nil, nil)
        if err != nil {
                l.log.Errorf("unable cancel htlc: %v", err)
                return
        }

        // Send the appropriate failure message depending on whether we're
        // in a blinded route or not.
        if err := l.sendIncomingHTLCFailureMsg(
                add.ID, e, reason,
        ); err != nil {
                l.log.Errorf("unable to send HTLC failure: %v", err)
                return
        }

        // Notify a link failure on our incoming link. Outgoing htlc information
        // is not available at this point, because we have not decrypted the
        // onion, so it is excluded.
        var eventType HtlcEventType
        if isReceive {
                eventType = HtlcEventTypeReceive
        } else {
                eventType = HtlcEventTypeForward
        }

        l.cfg.HtlcNotifier.NotifyLinkFailEvent(
                HtlcKey{
                        IncomingCircuit: models.CircuitKey{
                                ChanID: l.ShortChanID(),
                                HtlcID: add.ID,
                        },
                },
                HtlcInfo{
                        IncomingTimeLock: add.Expiry,
                        IncomingAmt:      add.Amount,
                },
                eventType,
                failure,
                true,
        )
}

// sendPeerHTLCFailure handles sending a HTLC failure message back to the
// peer from which the HTLC was received. This function is primarily used to
// handle the special requirements of route blinding, specifically:
// - Forwarding nodes must switch out any errors with MalformedFailHTLC
// - Introduction nodes should return regular HTLC failure messages.
//
// It accepts the original opaque failure, which will be used in the case
// that we're not part of a blinded route and an error encrypter that'll be
// used if we are the introduction node and need to present an error as if
// we're the failing party.
func (l *channelLink) sendIncomingHTLCFailureMsg(htlcIndex uint64,
        e hop.ErrorEncrypter,
        originalFailure lnwire.OpaqueReason) error {

        var msg lnwire.Message
        switch {
        // Our circuit's error encrypter will be nil if this was a locally
        // initiated payment. We can only hit a blinded error for a locally
        // initiated payment if we allow ourselves to be picked as the
        // introduction node for our own payments and in that case we
        // shouldn't reach this code. To prevent the HTLC getting stuck,
        // we fail it back and log an error.
        // code.
        case e == nil:
                msg = &lnwire.UpdateFailHTLC{
                        ChanID: l.ChanID(),
                        ID:     htlcIndex,
                        Reason: originalFailure,
                }

                l.log.Errorf("Unexpected blinded failure when "+
                        "we are the sending node, incoming htlc: %v(%v)",
                        l.ShortChanID(), htlcIndex)

        // For cleartext hops (ie, non-blinded/normal) we don't need any
        // transformation on the error message and can just send the original.
        case !e.Type().IsBlinded():
                msg = &lnwire.UpdateFailHTLC{
                        ChanID: l.ChanID(),
                        ID:     htlcIndex,
                        Reason: originalFailure,
                }

        // When we're the introduction node, we need to convert the error to
        // a UpdateFailHTLC.
        case e.Type() == hop.EncrypterTypeIntroduction:
                l.log.Debugf("Introduction blinded node switching out failure "+
                        "error: %v", htlcIndex)

                // The specification does not require that we set the onion
                // blob.
                failureMsg := lnwire.NewInvalidBlinding(
                        fn.None[[lnwire.OnionPacketSize]byte](),
                )
                reason, err := e.EncryptFirstHop(failureMsg)
                if err != nil {
                        return err
                }

                msg = &lnwire.UpdateFailHTLC{
                        ChanID: l.ChanID(),
                        ID:     htlcIndex,
                        Reason: reason,
                }

        // If we are a relaying node, we need to switch out any error that
        // we've received to a malformed HTLC error.
        case e.Type() == hop.EncrypterTypeRelaying:
                l.log.Debugf("Relaying blinded node switching out malformed "+
                        "error: %v", htlcIndex)

                msg = &lnwire.UpdateFailMalformedHTLC{
                        ChanID:      l.ChanID(),
                        ID:          htlcIndex,
                        FailureCode: lnwire.CodeInvalidBlinding,
                }

        default:
                return fmt.Errorf("unexpected encrypter: %d", e)
        }

        if err := l.cfg.Peer.SendMessage(false, msg); err != nil {
                l.log.Warnf("Send update fail failed: %v", err)
        }

        return nil
}

// sendMalformedHTLCError helper function which sends the malformed HTLC update
// to the payment sender.
func (l *channelLink) sendMalformedHTLCError(htlcIndex uint64,
        code lnwire.FailCode, onionBlob [lnwire.OnionPacketSize]byte,
        sourceRef *channeldb.AddRef) {

        shaOnionBlob := sha256.Sum256(onionBlob[:])
        err := l.channel.MalformedFailHTLC(htlcIndex, code, shaOnionBlob, sourceRef)
        if err != nil {
                l.log.Errorf("unable cancel htlc: %v", err)
                return
        }

        err = l.cfg.Peer.SendMessage(false, &lnwire.UpdateFailMalformedHTLC{
                ChanID:       l.ChanID(),
                ID:           htlcIndex,
                ShaOnionBlob: shaOnionBlob,
                FailureCode:  code,
        })
        if err != nil {
                l.log.Errorf("failed to send UpdateFailMalformedHTLC: %v", err)
        }
}

// failf is a function which is used to encapsulate the action necessary for
// properly failing the link. It takes a LinkFailureError, which will be passed
// to the OnChannelFailure closure, in order for it to determine if we should
// force close the channel, and if we should send an error message to the
// remote peer.
func (l *channelLink) failf(linkErr LinkFailureError, format string,
        a ...interface{}) {

        reason := fmt.Errorf(format, a...)

        // Return if we have already notified about a failure.
        if l.failed {
                l.log.Warnf("ignoring link failure (%v), as link already "+
                        "failed", reason)
                return
        }

        l.log.Errorf("failing link: %s with error: %v", reason, linkErr)

        // Set failed, such that we won't process any more updates, and notify
        // the peer about the failure.
        l.failed = true
        l.cfg.OnChannelFailure(l.ChanID(), l.ShortChanID(), linkErr)
}

// FundingCustomBlob returns the custom funding blob of the channel that this
// link is associated with. The funding blob represents static information about
// the channel that was created at channel funding time.
func (l *channelLink) FundingCustomBlob() fn.Option[tlv.Blob] {
        if l.channel == nil {
                return fn.None[tlv.Blob]()
        }

        if l.channel.State() == nil {
                return fn.None[tlv.Blob]()
        }

        return l.channel.State().CustomBlob
}

// CommitmentCustomBlob returns the custom blob of the current local commitment
// of the channel that this link is associated with.
func (l *channelLink) CommitmentCustomBlob() fn.Option[tlv.Blob] {
        if l.channel == nil {
                return fn.None[tlv.Blob]()
        }

        return l.channel.LocalCommitmentBlob()
}

// handleHtlcResolution takes an HTLC resolution and processes it by draining
// the hodlQueue. Once processed, a commit_sig is sent to the remote to update
// their commitment.
func (l *channelLink) handleHtlcResolution(ctx context.Context,
        hodlItem any) error {

        htlcResolution, ok := hodlItem.(invoices.HtlcResolution)
        if !ok {
                return fmt.Errorf("expect HtlcResolution, got %T", hodlItem)
        }

        err := l.processHodlQueue(ctx, htlcResolution)
        // No error, success.
        if err == nil {
                return nil
        }

        switch {
        // If the duplicate keystone error was encountered, fail back
        // gracefully.
        case errors.Is(err, ErrDuplicateKeystone):
                l.failf(
                        LinkFailureError{
                                code: ErrCircuitError,
                        },
                        "process hodl queue: temporary circuit error: %v", err,
                )

        // Send an Error message to the peer.
        default:
                l.failf(
                        LinkFailureError{
                                code: ErrInternalError,
                        },
                        "process hodl queue: unable to update commitment: %v",
                        err,
                )
        }

        return err
}

// handleQuiescenceReq takes a locally initialized (RPC) quiescence request and
// forwards it to the quiescer for further processing.
func (l *channelLink) handleQuiescenceReq(req StfuReq) error {
        l.quiescer.InitStfu(req)

        if !l.noDanglingUpdates(lntypes.Local) {
                return nil
        }

        err := l.quiescer.SendOwedStfu()
        if err != nil {
                l.stfuFailf("SendOwedStfu: %s", err.Error())
                res := fn.Err[lntypes.ChannelParty](err)
                req.Resolve(res)
        }

        return err
}

// handleUpdateFee is called whenever the `updateFeeTimer` ticks. It is used to
// decide whether we should send an `update_fee` msg to update the commitment's
// feerate.
func (l *channelLink) handleUpdateFee(ctx context.Context) error {
        // If we're not the initiator of the channel, we don't control the fees,
        // so we can ignore this.
        if !l.channel.IsInitiator() {
                return nil
        }

        // If we are the initiator, then we'll sample the current fee rate to
        // get into the chain within 3 blocks.
        netFee, err := l.sampleNetworkFee()
        if err != nil {
                return fmt.Errorf("unable to sample network fee: %w", err)
        }

        minRelayFee := l.cfg.FeeEstimator.RelayFeePerKW()

        newCommitFee := l.channel.IdealCommitFeeRate(
                netFee, minRelayFee,
                l.cfg.MaxAnchorsCommitFeeRate,
                l.cfg.MaxFeeAllocation,
        )

        // We determine if we should adjust the commitment fee based on the
        // current commitment fee, the suggested new commitment fee and the
        // current minimum relay fee rate.
        commitFee := l.channel.CommitFeeRate()
        if !shouldAdjustCommitFee(newCommitFee, commitFee, minRelayFee) {
                return nil
        }

        // If we do, then we'll send a new UpdateFee message to the remote
        // party, to be locked in with a new update.
        err = l.updateChannelFee(ctx, newCommitFee)
        if err != nil {
                return fmt.Errorf("unable to update fee rate: %w", err)
        }

        return nil
}

// toggleBatchTicker checks whether we need to resume or pause the batch ticker.
// When we have no pending updates, the ticker is paused, otherwise resumed.
func (l *channelLink) toggleBatchTicker() {
        // If the previous event resulted in a non-empty batch, resume the batch
        // ticker so that it can be cleared. Otherwise pause the ticker to
        // prevent waking up the htlcManager while the batch is empty.
        numUpdates := l.channel.NumPendingUpdates(lntypes.Local, lntypes.Remote)
        if numUpdates > 0 {
                l.cfg.BatchTicker.Resume()
                l.log.Tracef("BatchTicker resumed, NumPendingUpdates(Local, "+
                        "Remote)=%d", numUpdates)

                return
        }

        l.cfg.BatchTicker.Pause()
        l.log.Trace("BatchTicker paused due to zero NumPendingUpdates" +
                "(Local, Remote)")
}

// resumeLink is called when starting a previous link. It will go through the
// reestablishment protocol and reforwarding packets that are yet resolved.
func (l *channelLink) resumeLink(ctx context.Context) error {
        // If this isn't the first time that this channel link has been created,
        // then we'll need to check to see if we need to re-synchronize state
        // with the remote peer. settledHtlcs is a map of HTLC's that we
        // re-settled as part of the channel state sync.
        if l.cfg.SyncStates {
                err := l.syncChanStates(ctx)
                if err != nil {
                        l.handleChanSyncErr(err)

                        return err
                }
        }

        // If a shutdown message has previously been sent on this link, then we
        // need to make sure that we have disabled any HTLC adds on the outgoing
        // direction of the link and that we re-resend the same shutdown message
        // that we previously sent.
        //
        // TODO(yy): we should either move this to chanCloser, or move all
        // shutdown handling logic to be managed by the link, but not a mixed of
        // partial management by two subsystems.
        l.cfg.PreviouslySentShutdown.WhenSome(func(shutdown lnwire.Shutdown) {
                // Immediately disallow any new outgoing HTLCs.
                if !l.DisableAdds(Outgoing) {
                        l.log.Warnf("Outgoing link adds already disabled")
                }

                // Re-send the shutdown message the peer. Since syncChanStates
                // would have sent any outstanding CommitSig, it is fine for us
                // to immediately queue the shutdown message now.
                err := l.cfg.Peer.SendMessage(false, &shutdown)
                if err != nil {
                        l.log.Warnf("Error sending shutdown message: %v", err)
                }
        })

        // We've successfully reestablished the channel, mark it as such to
        // allow the switch to forward HTLCs in the outbound direction.
        l.markReestablished()

        // With the channel states synced, we now reset the mailbox to ensure we
        // start processing all unacked packets in order. This is done here to
        // ensure that all acknowledgments that occur during channel
        // resynchronization have taken affect, causing us only to pull unacked
        // packets after starting to read from the downstream mailbox.
        err := l.mailBox.ResetPackets()
        if err != nil {
                l.log.Errorf("failed to reset packets: %v", err)
        }

        // If the channel is pending, there's no need to reforwarding packets.
        if l.ShortChanID() == hop.Source {
                return nil
        }

        // After cleaning up any memory pertaining to incoming packets, we now
        // replay our forwarding packages to handle any htlcs that can be
        // processed locally, or need to be forwarded out to the switch. We will
        // only attempt to resolve packages if our short chan id indicates that
        // the channel is not pending, otherwise we should have no htlcs to
        // reforward.
        err = l.resolveFwdPkgs(ctx)
        switch {
        // No error was encountered, success.
        case err == nil:
                // With our link's in-memory state fully reconstructed, spawn a
                // goroutine to manage the reclamation of disk space occupied by
                // completed forwarding packages.
                l.cg.WgAdd(1)
                go l.fwdPkgGarbager()

                return nil

        // If the duplicate keystone error was encountered, we'll fail without
        // sending an Error message to the peer.
        case errors.Is(err, ErrDuplicateKeystone):
                l.failf(LinkFailureError{code: ErrCircuitError},
                        "temporary circuit error: %v", err)

        // A non-nil error was encountered, send an Error message to
        // the peer.
        default:
                l.failf(LinkFailureError{code: ErrInternalError},
                        "unable to resolve fwd pkgs: %v", err)
        }

        return err
}

// processRemoteUpdateAddHTLC takes an `UpdateAddHTLC` msg sent from the remote
// and processes it.
func (l *channelLink) processRemoteUpdateAddHTLC(
        msg *lnwire.UpdateAddHTLC) error {

        if l.IsFlushing(Incoming) {
                // This is forbidden by the protocol specification. The best
                // chance we have to deal with this is to drop the connection.
                // This should roll back the channel state to the last
                // CommitSig. If the remote has already sent a CommitSig we
                // haven't received yet, channel state will be re-synchronized
                // with a ChannelReestablish message upon reconnection and the
                // protocol state that caused us to flush the link will be
                // rolled back. In the event that there was some
                // non-deterministic behavior in the remote that caused them to
                // violate the protocol, we have a decent shot at correcting it
                // this way, since reconnecting will put us in the cleanest
                // possible state to try again.
                //
                // In addition to the above, it is possible for us to hit this
                // case in situations where we improperly handle message
                // ordering due to concurrency choices. An issue has been filed
                // to address this here:
                // https://github.com/lightningnetwork/lnd/issues/8393
                err := errors.New("received add while link is flushing")
                l.failf(
                        LinkFailureError{
                                code:             ErrInvalidUpdate,
                                FailureAction:    LinkFailureDisconnect,
                                PermanentFailure: false,
                                Warning:          true,
                        }, err.Error(),
                )

                return err
        }

        // Disallow htlcs with blinding points set if we haven't enabled the
        // feature. This saves us from having to process the onion at all, but
        // will only catch blinded payments where we are a relaying node (as the
        // blinding point will be in the payload when we're the introduction
        // node).
        if msg.BlindingPoint.IsSome() && l.cfg.DisallowRouteBlinding {
                err := errors.New("blinding point included when route " +
                        "blinding is disabled")

                l.failf(LinkFailureError{code: ErrInvalidUpdate}, err.Error())

                return err
        }

        // We have to check the limit here rather than later in the switch
        // because the counterparty can keep sending HTLC's without sending a
        // revoke. This would mean that the switch check would only occur later.
        if l.isOverexposedWithHtlc(msg, true) {
                err := errors.New("peer sent us an HTLC that exceeded our " +
                        "max fee exposure")
                l.failf(LinkFailureError{code: ErrInternalError}, err.Error())

                return err
        }

        // We just received an add request from an upstream peer, so we add it
        // to our state machine, then add the HTLC to our "settle" list in the
        // event that we know the preimage.
        index, err := l.channel.ReceiveHTLC(msg)
        if err != nil {
                l.failf(LinkFailureError{code: ErrInvalidUpdate},
                        "unable to handle upstream add HTLC: %v", err)

                return err
        }

        l.log.Tracef("receive upstream htlc with payment hash(%x), "+
                "assigning index: %v", msg.PaymentHash[:], index)

        return nil
}

// processRemoteUpdateFulfillHTLC takes an `UpdateFulfillHTLC` msg sent from the
// remote and processes it.
func (l *channelLink) processRemoteUpdateFulfillHTLC(
        msg *lnwire.UpdateFulfillHTLC) error {

        pre := msg.PaymentPreimage
        idx := msg.ID

        // Before we pipeline the settle, we'll check the set of active htlc's
        // to see if the related UpdateAddHTLC has been fully locked-in.
        var lockedin bool
        htlcs := l.channel.ActiveHtlcs()
        for _, add := range htlcs {
                // The HTLC will be outgoing and match idx.
                if !add.Incoming && add.HtlcIndex == idx {
                        lockedin = true
                        break
                }
        }

        if !lockedin {
                err := errors.New("unable to handle upstream settle")
                l.failf(LinkFailureError{code: ErrInvalidUpdate}, err.Error())

                return err
        }

        if err := l.channel.ReceiveHTLCSettle(pre, idx); err != nil {
                l.failf(
                        LinkFailureError{
                                code:          ErrInvalidUpdate,
                                FailureAction: LinkFailureForceClose,
                        },
                        "unable to handle upstream settle HTLC: %v", err,
                )

                return err
        }

        settlePacket := &htlcPacket{
                outgoingChanID: l.ShortChanID(),
                outgoingHTLCID: idx,
                htlc: &lnwire.UpdateFulfillHTLC{
                        PaymentPreimage: pre,
                },
        }

        // Add the newly discovered preimage to our growing list of uncommitted
        // preimage. These will be written to the witness cache just before
        // accepting the next commitment signature from the remote peer.
        l.uncommittedPreimages = append(l.uncommittedPreimages, pre)

        // Pipeline this settle, send it to the switch.
        go l.forwardBatch(false, settlePacket)

        return nil
}

// processRemoteUpdateFailMalformedHTLC takes an `UpdateFailMalformedHTLC` msg
// sent from the remote and processes it.
func (l *channelLink) processRemoteUpdateFailMalformedHTLC(
        msg *lnwire.UpdateFailMalformedHTLC) error {

        // Convert the failure type encoded within the HTLC fail message to the
        // proper generic lnwire error code.
        var failure lnwire.FailureMessage
        switch msg.FailureCode {
        case lnwire.CodeInvalidOnionVersion:
                failure = &lnwire.FailInvalidOnionVersion{
                        OnionSHA256: msg.ShaOnionBlob,
                }
        case lnwire.CodeInvalidOnionHmac:
                failure = &lnwire.FailInvalidOnionHmac{
                        OnionSHA256: msg.ShaOnionBlob,
                }

        case lnwire.CodeInvalidOnionKey:
                failure = &lnwire.FailInvalidOnionKey{
                        OnionSHA256: msg.ShaOnionBlob,
                }

        // Handle malformed errors that are part of a blinded route. This case
        // is slightly different, because we expect every relaying node in the
        // blinded portion of the route to send malformed errors. If we're also
        // a relaying node, we're likely going to switch this error out anyway
        // for our own malformed error, but we handle the case here for
        // completeness.
        case lnwire.CodeInvalidBlinding:
                failure = &lnwire.FailInvalidBlinding{
                        OnionSHA256: msg.ShaOnionBlob,
                }

        default:
                l.log.Warnf("unexpected failure code received in "+
                        "UpdateFailMailformedHTLC: %v", msg.FailureCode)

                // We don't just pass back the error we received from our
                // successor. Otherwise we might report a failure that penalizes
                // us more than needed. If the onion that we forwarded was
                // correct, the node should have been able to send back its own
                // failure. The node did not send back its own failure, so we
                // assume there was a problem with the onion and report that
                // back. We reuse the invalid onion key failure because there is
                // no specific error for this case.
                failure = &lnwire.FailInvalidOnionKey{
                        OnionSHA256: msg.ShaOnionBlob,
                }
        }

        // With the error parsed, we'll convert the into it's opaque form.
        var b bytes.Buffer
        if err := lnwire.EncodeFailure(&b, failure, 0); err != nil {
                return fmt.Errorf("unable to encode malformed error: %w", err)
        }

        // If remote side have been unable to parse the onion blob we have sent
        // to it, than we should transform the malformed HTLC message to the
        // usual HTLC fail message.
        err := l.channel.ReceiveFailHTLC(msg.ID, b.Bytes())
        if err != nil {
                l.failf(LinkFailureError{code: ErrInvalidUpdate},
                        "unable to handle upstream fail HTLC: %v", err)

                return err
        }

        return nil
}

// processRemoteUpdateFailHTLC takes an `UpdateFailHTLC` msg sent from the
// remote and processes it.
func (l *channelLink) processRemoteUpdateFailHTLC(
        msg *lnwire.UpdateFailHTLC) error {

        // Verify that the failure reason is at least 256 bytes plus overhead.
        const minimumFailReasonLength = lnwire.FailureMessageLength + 2 + 2 + 32

        if len(msg.Reason) < minimumFailReasonLength {
                // We've received a reason with a non-compliant length. Older
                // nodes happily relay back these failures that may originate
                // from a node further downstream. Therefore we can't just fail
                // the channel.
                //
                // We want to be compliant ourselves, so we also can't pass back
                // the reason unmodified. And we must make sure that we don't
                // hit the magic length check of 260 bytes in
                // processRemoteSettleFails either.
                //
                // Because the reason is unreadable for the payer anyway, we
                // just replace it by a compliant-length series of random bytes.
                msg.Reason = make([]byte, minimumFailReasonLength)
                _, err := crand.Read(msg.Reason[:])
                if err != nil {
                        return fmt.Errorf("random generation error: %w", err)
                }
        }

        // Add fail to the update log.
        idx := msg.ID
        err := l.channel.ReceiveFailHTLC(idx, msg.Reason[:])
        if err != nil {
                l.failf(LinkFailureError{code: ErrInvalidUpdate},
                        "unable to handle upstream fail HTLC: %v", err)

                return err
        }

        return nil
}

// processRemoteCommitSig takes a `CommitSig` msg sent from the remote and
// processes it.
func (l *channelLink) processRemoteCommitSig(ctx context.Context,
        msg *lnwire.CommitSig) error {

        // Since we may have learned new preimages for the first time, we'll add
        // them to our preimage cache. By doing this, we ensure any contested
        // contracts watched by any on-chain arbitrators can now sweep this HTLC
        // on-chain. We delay committing the preimages until just before
        // accepting the new remote commitment, as afterwards the peer won't
        // resend the Settle messages on the next channel reestablishment. Doing
        // so allows us to more effectively batch this operation, instead of
        // doing a single write per preimage.
        err := l.cfg.PreimageCache.AddPreimages(l.uncommittedPreimages...)
        if err != nil {
                l.failf(
                        LinkFailureError{code: ErrInternalError},
                        "unable to add preimages=%v to cache: %v",
                        l.uncommittedPreimages, err,
                )

                return err
        }

        // Instead of truncating the slice to conserve memory allocations, we
        // simply set the uncommitted preimage slice to nil so that a new one
        // will be initialized if any more witnesses are discovered. We do this
        // because the maximum size that the slice can occupy is 15KB, and we
        // want to ensure we release that memory back to the runtime.
        l.uncommittedPreimages = nil

        // We just received a new updates to our local commitment chain,
        // validate this new commitment, closing the link if invalid.
        auxSigBlob, err := msg.CustomRecords.Serialize()
        if err != nil {
                l.failf(
                        LinkFailureError{code: ErrInvalidCommitment},
                        "unable to serialize custom records: %v", err,
                )

                return err
        }
        err = l.channel.ReceiveNewCommitment(&lnwallet.CommitSigs{
                CommitSig:  msg.CommitSig,
                HtlcSigs:   msg.HtlcSigs,
                PartialSig: msg.PartialSig,
                AuxSigBlob: auxSigBlob,
        })
        if err != nil {
                // If we were unable to reconstruct their proposed commitment,
                // then we'll examine the type of error. If it's an
                // InvalidCommitSigError, then we'll send a direct error.
                var sendData []byte
                switch {
                case lnutils.ErrorAs[*lnwallet.InvalidCommitSigError](err):
                        sendData = []byte(err.Error())
                case lnutils.ErrorAs[*lnwallet.InvalidHtlcSigError](err):
                        sendData = []byte(err.Error())
                }
                l.failf(
                        LinkFailureError{
                                code:          ErrInvalidCommitment,
                                FailureAction: LinkFailureForceClose,
                                SendData:      sendData,
                        },
                        "ChannelPoint(%v): unable to accept new "+
                                "commitment: %v",
                        l.channel.ChannelPoint(), err,
                )

                return err
        }

        // As we've just accepted a new state, we'll now immediately send the
        // remote peer a revocation for our prior state.
        nextRevocation, currentHtlcs, finalHTLCs, err :=
                l.channel.RevokeCurrentCommitment()
        if err != nil {
                l.log.Errorf("unable to revoke commitment: %v", err)

                // We need to fail the channel in case revoking our local
                // commitment does not succeed. We might have already advanced
                // our channel state which would lead us to proceed with an
                // unclean state.
                //
                // NOTE: We do not trigger a force close because this could
                // resolve itself in case our db was just busy not accepting new
                // transactions.
                l.failf(
                        LinkFailureError{
                                code:          ErrInternalError,
                                Warning:       true,
                                FailureAction: LinkFailureDisconnect,
                        },
                        "ChannelPoint(%v): unable to accept new "+
                                "commitment: %v",
                        l.channel.ChannelPoint(), err,
                )

                return err
        }

        // As soon as we are ready to send our next revocation, we can invoke
        // the incoming commit hooks.
        l.Lock()
        l.incomingCommitHooks.invoke()
        l.Unlock()

        err = l.cfg.Peer.SendMessage(false, nextRevocation)
        if err != nil {
                l.log.Errorf("failed to send RevokeAndAck: %v", err)
        }

        // Notify the incoming htlcs of which the resolutions were locked in.
        for id, settled := range finalHTLCs {
                l.cfg.HtlcNotifier.NotifyFinalHtlcEvent(
                        models.CircuitKey{
                                ChanID: l.ShortChanID(),
                                HtlcID: id,
                        },
                        channeldb.FinalHtlcInfo{
                                Settled:  settled,
                                Offchain: true,
                        },
                )
        }

        // Since we just revoked our commitment, we may have a new set of HTLC's
        // on our commitment, so we'll send them using our function closure
        // NotifyContractUpdate.
        newUpdate := &contractcourt.ContractUpdate{
                HtlcKey: contractcourt.LocalHtlcSet,
                Htlcs:   currentHtlcs,
        }
        err = l.cfg.NotifyContractUpdate(newUpdate)
        if err != nil {
                return fmt.Errorf("unable to notify contract update: %w", err)
        }

        select {
        case <-l.cg.Done():
                return nil
        default:
        }

        // If the remote party initiated the state transition, we'll reply with
        // a signature to provide them with their version of the latest
        // commitment. Otherwise, both commitment chains are fully synced from
        // our PoV, then we don't need to reply with a signature as both sides
        // already have a commitment with the latest accepted.
        if l.channel.OweCommitment() {
                if !l.updateCommitTxOrFail(ctx) {
                        return nil
                }
        }

        // If we need to send out an Stfu, this would be the time to do so.
        if l.noDanglingUpdates(lntypes.Local) {
                err = l.quiescer.SendOwedStfu()
                if err != nil {
                        l.stfuFailf("sendOwedStfu: %v", err.Error())
                }
        }

        // Now that we have finished processing the incoming CommitSig and sent
        // out our RevokeAndAck, we invoke the flushHooks if the channel state
        // is clean.
        l.Lock()
        if l.channel.IsChannelClean() {
                l.flushHooks.invoke()
        }
        l.Unlock()

        return nil
}

// processRemoteRevokeAndAck takes a `RevokeAndAck` msg sent from the remote and
// processes it.
func (l *channelLink) processRemoteRevokeAndAck(ctx context.Context,
        msg *lnwire.RevokeAndAck) error {

        // We've received a revocation from the remote chain, if valid, this
        // moves the remote chain forward, and expands our revocation window.

        // We now process the message and advance our remote commit chain.
        fwdPkg, remoteHTLCs, err := l.channel.ReceiveRevocation(msg)
        if err != nil {
                // TODO(halseth): force close?
                l.failf(
                        LinkFailureError{
                                code:          ErrInvalidRevocation,
                                FailureAction: LinkFailureDisconnect,
                        },
                        "unable to accept revocation: %v", err,
                )

                return err
        }

        // The remote party now has a new primary commitment, so we'll update
        // the contract court to be aware of this new set (the prior old remote
        // pending).
        newUpdate := &contractcourt.ContractUpdate{
                HtlcKey: contractcourt.RemoteHtlcSet,
                Htlcs:   remoteHTLCs,
        }
        err = l.cfg.NotifyContractUpdate(newUpdate)
        if err != nil {
                return fmt.Errorf("unable to notify contract update: %w", err)
        }

        select {
        case <-l.cg.Done():
                return nil
        default:
        }

        // If we have a tower client for this channel type, we'll create a
        // backup for the current state.
        if l.cfg.TowerClient != nil {
                state := l.channel.State()
                chanID := l.ChanID()

                err = l.cfg.TowerClient.BackupState(
                        &chanID, state.RemoteCommitment.CommitHeight-1,
                )
                if err != nil {
                        l.failf(LinkFailureError{
                                code: ErrInternalError,
                        }, "unable to queue breach backup: %v", err)

                        return err
                }
        }

        // If we can send updates then we can process adds in case we are the
        // exit hop and need to send back resolutions, or in case there are
        // validity issues with the packets. Otherwise we defer the action until
        // resume.
        //
        // We are free to process the settles and fails without this check since
        // processing those can't result in further updates to this channel
        // link.
        if l.quiescer.CanSendUpdates() {
                l.processRemoteAdds(fwdPkg)
        } else {
                l.quiescer.OnResume(func() {
                        l.processRemoteAdds(fwdPkg)
                })
        }
        l.processRemoteSettleFails(fwdPkg)

        // If the link failed during processing the adds, we must return to
        // ensure we won't attempted to update the state further.
        if l.failed {
                return nil
        }

        // The revocation window opened up. If there are pending local updates,
        // try to update the commit tx. Pending updates could already have been
        // present because of a previously failed update to the commit tx or
        // freshly added in by processRemoteAdds. Also in case there are no
        // local updates, but there are still remote updates that are not in the
        // remote commit tx yet, send out an update.
        if l.channel.OweCommitment() {
                if !l.updateCommitTxOrFail(ctx) {
                        return nil
                }
        }

        // Now that we have finished processing the RevokeAndAck, we can invoke
        // the flushHooks if the channel state is clean.
        l.Lock()
        if l.channel.IsChannelClean() {
                l.flushHooks.invoke()
        }
        l.Unlock()

        return nil
}

// processRemoteUpdateFee takes an `UpdateFee` msg sent from the remote and
// processes it.
func (l *channelLink) processRemoteUpdateFee(msg *lnwire.UpdateFee) error {
        // Check and see if their proposed fee-rate would make us exceed the fee
        // threshold.
        fee := chainfee.SatPerKWeight(msg.FeePerKw)

        isDust, err := l.exceedsFeeExposureLimit(fee)
        if err != nil {
                // This shouldn't typically happen. If it does, it indicates
                // something is wrong with our channel state.
                l.log.Errorf("Unable to determine if fee threshold " +
                        "exceeded")
                l.failf(LinkFailureError{code: ErrInternalError},
                        "error calculating fee exposure: %v", err)

                return err
        }

        if isDust {
                // The proposed fee-rate makes us exceed the fee threshold.
                l.failf(LinkFailureError{code: ErrInternalError},
                        "fee threshold exceeded: %v", err)
                return err
        }

        // We received fee update from peer. If we are the initiator we will
        // fail the channel, if not we will apply the update.
        if err := l.channel.ReceiveUpdateFee(fee); err != nil {
                l.failf(LinkFailureError{code: ErrInvalidUpdate},
                        "error receiving fee update: %v", err)
                return err
        }

        // Update the mailbox's feerate as well.
        l.mailBox.SetFeeRate(fee)

        return nil
}

// processRemoteError takes an `Error` msg sent from the remote and fails the
// channel link.
func (l *channelLink) processRemoteError(msg *lnwire.Error) {
        // Error received from remote, MUST fail channel, but should only print
        // the contents of the error message if all characters are printable
        // ASCII.
        l.failf(
                // TODO(halseth): we currently don't fail the channel
                // permanently, as there are some sync issues with other
                // implementations that will lead to them sending an
                // error message, but we can recover from on next
                // connection. See
                // https://github.com/ElementsProject/lightning/issues/4212
                LinkFailureError{
                        code:             ErrRemoteError,
                        PermanentFailure: false,
                },
                "ChannelPoint(%v): received error from peer: %v",
                l.channel.ChannelPoint(), msg.Error(),
        )
}

// processLocalUpdateFulfillHTLC takes an `UpdateFulfillHTLC` from the local and
// processes it.
func (l *channelLink) processLocalUpdateFulfillHTLC(ctx context.Context,
        pkt *htlcPacket, htlc *lnwire.UpdateFulfillHTLC) {

        // If hodl.SettleOutgoing mode is active, we exit early to simulate
        // arbitrary delays between the switch adding the SETTLE to the mailbox,
        // and the HTLC being added to the commitment state.
        if l.cfg.HodlMask.Active(hodl.SettleOutgoing) {
                l.log.Warnf(hodl.SettleOutgoing.Warning())
                l.mailBox.AckPacket(pkt.inKey())

                return
        }

        // An HTLC we forward to the switch has just settled somewhere upstream.
        // Therefore we settle the HTLC within the our local state machine.
        inKey := pkt.inKey()
        err := l.channel.SettleHTLC(
                htlc.PaymentPreimage, pkt.incomingHTLCID, pkt.sourceRef,
                pkt.destRef, &inKey,
        )
        if err != nil {
                l.log.Errorf("unable to settle incoming HTLC for "+
                        "circuit-key=%v: %v", inKey, err)

                // If the HTLC index for Settle response was not known to our
                // commitment state, it has already been cleaned up by a prior
                // response. We'll thus try to clean up any lingering state to
                // ensure we don't continue reforwarding.
                if lnutils.ErrorAs[lnwallet.ErrUnknownHtlcIndex](err) {
                        l.cleanupSpuriousResponse(pkt)
                }

                // Remove the packet from the link's mailbox to ensure it
                // doesn't get replayed after a reconnection.
                l.mailBox.AckPacket(inKey)

                return
        }

        l.log.Debugf("queueing removal of SETTLE closed circuit: %s->%s",
                pkt.inKey(), pkt.outKey())

        l.closedCircuits = append(l.closedCircuits, pkt.inKey())

        // With the HTLC settled, we'll need to populate the wire message to
        // target the specific channel and HTLC to be canceled.
        htlc.ChanID = l.ChanID()
        htlc.ID = pkt.incomingHTLCID

        // Then we send the HTLC settle message to the connected peer so we can
        // continue the propagation of the settle message.
        err = l.cfg.Peer.SendMessage(false, htlc)
        if err != nil {
                l.log.Errorf("failed to send UpdateFulfillHTLC: %v", err)
        }

        // Send a settle event notification to htlcNotifier.
        l.cfg.HtlcNotifier.NotifySettleEvent(
                newHtlcKey(pkt), htlc.PaymentPreimage, getEventType(pkt),
        )

        // Immediately update the commitment tx to minimize latency.
        l.updateCommitTxOrFail(ctx)
}

// processLocalUpdateFailHTLC takes an `UpdateFailHTLC` from the local and
// processes it.
func (l *channelLink) processLocalUpdateFailHTLC(ctx context.Context,
        pkt *htlcPacket, htlc *lnwire.UpdateFailHTLC) {

        // If hodl.FailOutgoing mode is active, we exit early to simulate
        // arbitrary delays between the switch adding a FAIL to the mailbox, and
        // the HTLC being added to the commitment state.
        if l.cfg.HodlMask.Active(hodl.FailOutgoing) {
                l.log.Warnf(hodl.FailOutgoing.Warning())
                l.mailBox.AckPacket(pkt.inKey())

                return
        }

        // An HTLC cancellation has been triggered somewhere upstream, we'll
        // remove then HTLC from our local state machine.
        inKey := pkt.inKey()
        err := l.channel.FailHTLC(
                pkt.incomingHTLCID, htlc.Reason, pkt.sourceRef, pkt.destRef,
                &inKey,
        )
        if err != nil {
                l.log.Errorf("unable to cancel incoming HTLC for "+
                        "circuit-key=%v: %v", inKey, err)

                // If the HTLC index for Fail response was not known to our
                // commitment state, it has already been cleaned up by a prior
                // response. We'll thus try to clean up any lingering state to
                // ensure we don't continue reforwarding.
                if lnutils.ErrorAs[lnwallet.ErrUnknownHtlcIndex](err) {
                        l.cleanupSpuriousResponse(pkt)
                }

                // Remove the packet from the link's mailbox to ensure it
                // doesn't get replayed after a reconnection.
                l.mailBox.AckPacket(inKey)

                return
        }

        l.log.Debugf("queueing removal of FAIL closed circuit: %s->%s",
                pkt.inKey(), pkt.outKey())

        l.closedCircuits = append(l.closedCircuits, pkt.inKey())

        // With the HTLC removed, we'll need to populate the wire message to
        // target the specific channel and HTLC to be canceled. The "Reason"
        // field will have already been set within the switch.
        htlc.ChanID = l.ChanID()
        htlc.ID = pkt.incomingHTLCID

        // We send the HTLC message to the peer which initially created the
        // HTLC. If the incoming blinding point is non-nil, we know that we are
        // a relaying node in a blinded path. Otherwise, we're either an
        // introduction node or not part of a blinded path at all.
        err = l.sendIncomingHTLCFailureMsg(htlc.ID, pkt.obfuscator, htlc.Reason)
        if err != nil {
                l.log.Errorf("unable to send HTLC failure: %v", err)

                return
        }

        // If the packet does not have a link failure set, it failed further
        // down the route so we notify a forwarding failure. Otherwise, we
        // notify a link failure because it failed at our node.
        if pkt.linkFailure != nil {
                l.cfg.HtlcNotifier.NotifyLinkFailEvent(
                        newHtlcKey(pkt), newHtlcInfo(pkt), getEventType(pkt),
                        pkt.linkFailure, false,
                )
        } else {
                l.cfg.HtlcNotifier.NotifyForwardingFailEvent(
                        newHtlcKey(pkt), getEventType(pkt),
                )
        }

        // Immediately update the commitment tx to minimize latency.
        l.updateCommitTxOrFail(ctx)
}

lightningnetwork / lnd / 16569502135

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous