16948521526

Committed 13 Aug 2025 08:27PM UTC coverage: 54.877% (-12.1%) from 66.929%

Build # 16948521526

Build Type

Pull #10155

github

Committed by

web-flow

Commit Message

Merge 61c0fecf6 into c6a9116e3

Pull Request Pull Request #10155: Add missing invoice index for native sql

Run Details

108941 of 198518 relevant lines covered (54.88%)

22023.66 hits per line

Source File
Press 'n' to go to next uncovered line, 'b' for previous

89.8

/routing/payment_lifecycle.go

package routing

import (
        "context"
        "errors"
        "fmt"
        "time"

        "github.com/btcsuite/btcd/btcec/v2"
        "github.com/davecgh/go-spew/spew"
        sphinx "github.com/lightningnetwork/lightning-onion"
        "github.com/lightningnetwork/lnd/channeldb"
        "github.com/lightningnetwork/lnd/fn/v2"
        "github.com/lightningnetwork/lnd/graph/db/models"
        "github.com/lightningnetwork/lnd/htlcswitch"
        "github.com/lightningnetwork/lnd/lntypes"
        "github.com/lightningnetwork/lnd/lnutils"
        "github.com/lightningnetwork/lnd/lnwire"
        "github.com/lightningnetwork/lnd/routing/route"
        "github.com/lightningnetwork/lnd/routing/shards"
        "github.com/lightningnetwork/lnd/tlv"
)

// ErrPaymentLifecycleExiting is used when waiting for htlc attempt result, but
// the payment lifecycle is exiting .
var ErrPaymentLifecycleExiting = errors.New("payment lifecycle exiting")

// switchResult is the result sent back from the switch after processing the
// HTLC.
type switchResult struct {
        // attempt is the HTLC sent to the switch.
        attempt *channeldb.HTLCAttempt

        // result is sent from the switch which contains either a preimage if
        // ths HTLC is settled or an error if it's failed.
        result *htlcswitch.PaymentResult
}

// paymentLifecycle holds all information about the current state of a payment
// needed to resume if from any point.
type paymentLifecycle struct {
        router                *ChannelRouter
        feeLimit              lnwire.MilliSatoshi
        identifier            lntypes.Hash
        paySession            PaymentSession
        shardTracker          shards.ShardTracker
        currentHeight         int32
        firstHopCustomRecords lnwire.CustomRecords

        // quit is closed to signal the sub goroutines of the payment lifecycle
        // to stop.
        quit chan struct{}

        // resultCollected is used to send the result returned from the switch
        // for a given HTLC attempt.
        resultCollected chan *switchResult

        // resultCollector is a function that is used to collect the result of
        // an HTLC attempt, which is always mounted to `p.collectResultAsync`
        // except in unit test, where we use a much simpler resultCollector to
        // decouple the test flow for the payment lifecycle.
        resultCollector func(attempt *channeldb.HTLCAttempt)
}

// newPaymentLifecycle initiates a new payment lifecycle and returns it.
func newPaymentLifecycle(r *ChannelRouter, feeLimit lnwire.MilliSatoshi,
        identifier lntypes.Hash, paySession PaymentSession,
        shardTracker shards.ShardTracker, currentHeight int32,
        firstHopCustomRecords lnwire.CustomRecords) *paymentLifecycle {

        p := &paymentLifecycle{
                router:                r,
                feeLimit:              feeLimit,
                identifier:            identifier,
                paySession:            paySession,
                shardTracker:          shardTracker,
                currentHeight:         currentHeight,
                quit:                  make(chan struct{}),
                resultCollected:       make(chan *switchResult, 1),
                firstHopCustomRecords: firstHopCustomRecords,
        }

        // Mount the result collector.
        p.resultCollector = p.collectResultAsync

        return p
}

// calcFeeBudget returns the available fee to be used for sending HTLC
// attempts.
func (p *paymentLifecycle) calcFeeBudget(
        feesPaid lnwire.MilliSatoshi) lnwire.MilliSatoshi {

        budget := p.feeLimit

        // We'll subtract the used fee from our fee budget. In case of
        // overflow, we need to check whether feesPaid exceeds our budget
        // already.
        if feesPaid <= budget {
                budget -= feesPaid
        } else {
                budget = 0
        }

        return budget
}

// stateStep defines an action to be taken in our payment lifecycle. We either
// quit, continue, or exit the lifecycle, see details below.
type stateStep uint8

const (
        // stepSkip is used when we need to skip the current lifecycle and jump
        // to the next one.
        stepSkip stateStep = iota

        // stepProceed is used when we can proceed the current lifecycle.
        stepProceed

        // stepExit is used when we need to quit the current lifecycle.
        stepExit
)

// decideNextStep is used to determine the next step in the payment lifecycle.
// It first checks whether the current state of the payment allows more HTLC
// attempts to be made. If allowed, it will return so the lifecycle can continue
// making new attempts. Otherwise, it checks whether we need to wait for the
// results of already sent attempts. If needed, it will block until one of the
// results is sent back. then process its result here. When there's no need to
// wait for results, the method will exit with `stepExit` such that the payment
// lifecycle loop will terminate.
func (p *paymentLifecycle) decideNextStep(
        payment DBMPPayment) (stateStep, error) {

        // Check whether we could make new HTLC attempts.
        allow, err := payment.AllowMoreAttempts()
        if err != nil {
                return stepExit, err
        }

        // Exit early we need to make more attempts.
        if allow {
                return stepProceed, nil
        }

        // We cannot make more attempts, we now check whether we need to wait
        // for results.
        wait, err := payment.NeedWaitAttempts()
        if err != nil {
                return stepExit, err
        }

        // If we are not allowed to make new HTLC attempts and there's no need
        // to wait, the lifecycle is done and we can exit.
        if !wait {
                return stepExit, nil
        }

        log.Tracef("Waiting for attempt results for payment %v", p.identifier)

        // Otherwise we wait for the result for one HTLC attempt then continue
        // the lifecycle.
        select {
        case r := <-p.resultCollected:
                log.Tracef("Received attempt result for payment %v",
                        p.identifier)

                // Handle the result here. If there's no error, we will return
                // stepSkip and move to the next lifecycle iteration, which will
                // refresh the payment and wait for the next attempt result, if
                // any.
                _, err := p.handleAttemptResult(r.attempt, r.result)

                // We would only get a DB-related error here, which will cause
                // us to abort the payment flow.
                if err != nil {
                        return stepExit, err
                }

        case <-p.quit:
                return stepExit, ErrPaymentLifecycleExiting

        case <-p.router.quit:
                return stepExit, ErrRouterShuttingDown
        }

        return stepSkip, nil
}

// resumePayment resumes the paymentLifecycle from the current state.
func (p *paymentLifecycle) resumePayment(ctx context.Context) ([32]byte,
        *route.Route, error) {

        // When the payment lifecycle loop exits, we make sure to signal any
        // sub goroutine of the HTLC attempt to exit, then wait for them to
        // return.
        defer p.stop()

        // If we had any existing attempts outstanding, we'll start by spinning
        // up goroutines that'll collect their results and deliver them to the
        // lifecycle loop below.
        payment, err := p.reloadInflightAttempts()
        if err != nil {
                return [32]byte{}, nil, err
        }

        // Get the payment status.
        status := payment.GetStatus()

        // exitWithErr is a helper closure that logs and returns an error.
        exitWithErr := func(err error) ([32]byte, *route.Route, error) {
                // Log an error with the latest payment status.
                //
                // NOTE: this `status` variable is reassigned in the loop
                // below. We could also call `payment.GetStatus` here, but in a
                // rare case when the critical log is triggered when using
                // postgres as db backend, the `payment` could be nil, causing
                // the payment fetching to return an error.
                log.Errorf("Payment %v with status=%v failed: %v", p.identifier,
                        status, err)

                return [32]byte{}, nil, err
        }

        // We'll continue until either our payment succeeds, or we encounter a
        // critical error during path finding.
lifecycle:
        for {
                // Before we attempt any new shard, we'll check to see if we've
                // gone past the payment attempt timeout or if the context was
                // canceled. If the context is done, the payment is marked as
                // failed and we reload the latest payment state to reflect
                // this.
                //
                // NOTE: This can be called several times if there are more
                // attempts to be resolved after the timeout or context is
                // cancelled.
                if err := p.checkContext(ctx); err != nil {
                        return exitWithErr(err)
                }

                // We update the payment state on every iteration.
                currentPayment, ps, err := p.reloadPayment()
                if err != nil {
                        return exitWithErr(err)
                }

                // Reassign status so it can be read in `exitWithErr`.
                status = currentPayment.GetStatus()

                // Reassign payment such that when the lifecycle exits, the
                // latest payment can be read when we access its terminal info.
                payment = currentPayment

                // We now proceed our lifecycle with the following tasks in
                // order,
                //   1. request route.
                //   2. create HTLC attempt.
                //   3. send HTLC attempt.
                //   4. collect HTLC attempt result.
                //

                // Now decide the next step of the current lifecycle.
                step, err := p.decideNextStep(payment)
                if err != nil {
                        return exitWithErr(err)
                }

                switch step {
                // Exit the for loop and return below.
                case stepExit:
                        break lifecycle

                // Continue the for loop and skip the rest.
                case stepSkip:
                        continue lifecycle

                // Continue the for loop and proceed the rest.
                case stepProceed:

                // Unknown step received, exit with an error.
                default:
                        err = fmt.Errorf("unknown step: %v", step)
                        return exitWithErr(err)
                }

                // Now request a route to be used to create our HTLC attempt.
                rt, err := p.requestRoute(ps)
                if err != nil {
                        return exitWithErr(err)
                }

                // We may not be able to find a route for current attempt. In
                // that case, we continue the loop and move straight to the
                // next iteration in case there are results for inflight HTLCs
                // that still need to be collected.
                if rt == nil {
                        log.Errorf("No route found for payment %v",
                                p.identifier)

                        continue lifecycle
                }

                log.Tracef("Found route: %s", spew.Sdump(rt.Hops))

                // We found a route to try, create a new HTLC attempt to try.
                attempt, err := p.registerAttempt(rt, ps.RemainingAmt)
                if err != nil {
                        return exitWithErr(err)
                }

                // Once the attempt is created, send it to the htlcswitch.
                result, err := p.sendAttempt(attempt)
                if err != nil {
                        return exitWithErr(err)
                }

                // Now that the shard was successfully sent, launch a go
                // routine that will handle its result when its back.
                if result.err == nil {
                        p.resultCollector(attempt)
                }
        }

        // Once we are out the lifecycle loop, it means we've reached a
        // terminal condition. We either return the settled preimage or the
        // payment's failure reason.
        //
        // Optionally delete the failed attempts from the database.
        err = p.router.cfg.Control.DeleteFailedAttempts(p.identifier)
        if err != nil {
                log.Errorf("Error deleting failed htlc attempts for payment "+
                        "%v: %v", p.identifier, err)
        }

        htlc, failure := payment.TerminalInfo()
        if htlc != nil {
                return htlc.Settle.Preimage, &htlc.Route, nil
        }

        // Otherwise return the payment failure reason.
        return [32]byte{}, nil, *failure
}

// checkContext checks whether the payment context has been canceled.
// Cancellation occurs manually or if the context times out.
func (p *paymentLifecycle) checkContext(ctx context.Context) error {
        select {
        case <-ctx.Done():
                // If the context was canceled, we'll mark the payment as
                // failed. There are two cases to distinguish here: Either a
                // user-provided timeout was reached, or the context was
                // canceled, either to a manual cancellation or due to an
                // unknown error.
                var reason channeldb.FailureReason
                if errors.Is(ctx.Err(), context.DeadlineExceeded) {
                        reason = channeldb.FailureReasonTimeout
                        log.Warnf("Payment attempt not completed before "+
                                "context timeout, id=%s", p.identifier.String())
                } else {
                        reason = channeldb.FailureReasonCanceled
                        log.Warnf("Payment attempt context canceled, id=%s",
                                p.identifier.String())
                }

                // By marking the payment failed, depending on whether it has
                // inflight HTLCs or not, its status will now either be
                // `StatusInflight` or `StatusFailed`. In either case, no more
                // HTLCs will be attempted.
                err := p.router.cfg.Control.FailPayment(p.identifier, reason)
                if err != nil {
                        return fmt.Errorf("FailPayment got %w", err)
                }

        case <-p.router.quit:
                return fmt.Errorf("check payment timeout got: %w",
                        ErrRouterShuttingDown)

        // Fall through if we haven't hit our time limit.
        default:
        }

        return nil
}

// requestRoute is responsible for finding a route to be used to create an HTLC
// attempt.
func (p *paymentLifecycle) requestRoute(
        ps *channeldb.MPPaymentState) (*route.Route, error) {

        remainingFees := p.calcFeeBudget(ps.FeesPaid)

        // Query our payment session to construct a route.
        rt, err := p.paySession.RequestRoute(
                ps.RemainingAmt, remainingFees,
                uint32(ps.NumAttemptsInFlight), uint32(p.currentHeight),
                p.firstHopCustomRecords,
        )

        // Exit early if there's no error.
        if err == nil {
                // Allow the traffic shaper to add custom records to the
                // outgoing HTLC and also adjust the amount if needed.
                err = p.amendFirstHopData(rt)
                if err != nil {
                        return nil, err
                }

                return rt, nil
        }

        // Otherwise we need to handle the error.
        log.Warnf("Failed to find route for payment %v: %v", p.identifier, err)

        // If the error belongs to `noRouteError` set, it means a non-critical
        // error has happened during path finding, and we will mark the payment
        // failed with this reason. Otherwise, we'll return the critical error
        // found to abort the lifecycle.
        var routeErr noRouteError
        if !errors.As(err, &routeErr) {
                return nil, fmt.Errorf("requestRoute got: %w", err)
        }

        // It's the `paymentSession`'s responsibility to find a route for us
        // with the best effort. When it cannot find a path, we need to treat it
        // as a terminal condition and fail the payment no matter it has
        // inflight HTLCs or not.
        failureCode := routeErr.FailureReason()
        log.Warnf("Marking payment %v permanently failed with no route: %v",
                p.identifier, failureCode)

        err = p.router.cfg.Control.FailPayment(p.identifier, failureCode)
        if err != nil {
                return nil, fmt.Errorf("FailPayment got: %w", err)
        }

        // NOTE: we decide to not return the non-critical noRouteError here to
        // avoid terminating the payment lifecycle as there might be other
        // inflight HTLCs which we must wait for their results.
        return nil, nil
}

// stop signals any active shard goroutine to exit.
func (p *paymentLifecycle) stop() {
        close(p.quit)
}

// attemptResult holds the HTLC attempt and a possible error returned from
// sending it.
type attemptResult struct {
        // err is non-nil if a non-critical error was encountered when trying
        // to send the attempt, and we successfully updated the control tower
        // to reflect this error. This can be errors like not enough local
        // balance for the given route etc.
        err error

        // attempt is the attempt structure as recorded in the database.
        attempt *channeldb.HTLCAttempt
}

// collectResultAsync launches a goroutine that will wait for the result of the
// given HTLC attempt to be available then save its result in a map. Once
// received, it will send the result returned from the switch to channel
// `resultCollected`.
func (p *paymentLifecycle) collectResultAsync(attempt *channeldb.HTLCAttempt) {
        log.Debugf("Collecting result for attempt %v in payment %v",
                attempt.AttemptID, p.identifier)

        go func() {
                result, err := p.collectResult(attempt)
                if err != nil {
                        log.Errorf("Error collecting result for attempt %v in "+
                                "payment %v: %v", attempt.AttemptID,
                                p.identifier, err)

                        return
                }

                log.Debugf("Result collected for attempt %v in payment %v",
                        attempt.AttemptID, p.identifier)

                // Create a switch result and send it to the resultCollected
                // chan, which gets processed when the lifecycle is waiting for
                // a result to be received in decideNextStep.
                r := &switchResult{
                        attempt: attempt,
                        result:  result,
                }

                // Signal that a result has been collected.
                select {
                // Send the result so decideNextStep can proceed.
                case p.resultCollected <- r:

                case <-p.quit:
                        log.Debugf("Lifecycle exiting while collecting "+
                                "result for payment %v", p.identifier)

                case <-p.router.quit:
                }
        }()
}

// collectResult waits for the result of the given HTLC attempt to be sent by
// the switch and returns it.
func (p *paymentLifecycle) collectResult(
        attempt *channeldb.HTLCAttempt) (*htlcswitch.PaymentResult, error) {

        log.Tracef("Collecting result for attempt %v",
                lnutils.SpewLogClosure(attempt))

        result := &htlcswitch.PaymentResult{}

        // Regenerate the circuit for this attempt.
        circuit, err := attempt.Circuit()

        // TODO(yy): We generate this circuit to create the error decryptor,
        // which is then used in htlcswitch as the deobfuscator to decode the
        // error from `UpdateFailHTLC`. However, suppose it's an
        // `UpdateFulfillHTLC` message yet for some reason the sphinx packet is
        // failed to be generated, we'd miss settling it. This means we should
        // give it a second chance to try the settlement path in case
        // `GetAttemptResult` gives us back the preimage. And move the circuit
        // creation into htlcswitch so it's only constructed when there's a
        // failure message we need to decode.
        if err != nil {
                log.Debugf("Unable to generate circuit for attempt %v: %v",
                        attempt.AttemptID, err)
                return nil, err
        }

        // Using the created circuit, initialize the error decrypter, so we can
        // parse+decode any failures incurred by this payment within the
        // switch.
        errorDecryptor := &htlcswitch.SphinxErrorDecrypter{
                OnionErrorDecrypter: sphinx.NewOnionErrorDecrypter(circuit),
        }

        // Now ask the switch to return the result of the payment when
        // available.
        //
        // TODO(yy): consider using htlcswitch to create the `errorDecryptor`
        // since the htlc is already in db. This will also make the interface
        // `PaymentAttemptDispatcher` deeper and easier to use. Moreover, we'd
        // only create the decryptor when received a failure, further saving us
        // a few CPU cycles.
        resultChan, err := p.router.cfg.Payer.GetAttemptResult(
                attempt.AttemptID, p.identifier, errorDecryptor,
        )
        // Handle the switch error.
        if err != nil {
                log.Errorf("Failed getting result for attemptID %d "+
                        "from switch: %v", attempt.AttemptID, err)

                result.Error = err

                return result, nil
        }

        // The switch knows about this payment, we'll wait for a result to be
        // available.
        select {
        case r, ok := <-resultChan:
                if !ok {
                        return nil, htlcswitch.ErrSwitchExiting
                }

                result = r

        case <-p.quit:
                return nil, ErrPaymentLifecycleExiting

        case <-p.router.quit:
                return nil, ErrRouterShuttingDown
        }

        return result, nil
}

// registerAttempt is responsible for creating and saving an HTLC attempt in db
// by using the route info provided. The `remainingAmt` is used to decide
// whether this is the last attempt.
func (p *paymentLifecycle) registerAttempt(rt *route.Route,
        remainingAmt lnwire.MilliSatoshi) (*channeldb.HTLCAttempt, error) {

        // If this route will consume the last remaining amount to send
        // to the receiver, this will be our last shard (for now).
        isLastAttempt := rt.ReceiverAmt() == remainingAmt

        // Using the route received from the payment session, create a new
        // shard to send.
        attempt, err := p.createNewPaymentAttempt(rt, isLastAttempt)
        if err != nil {
                return nil, err
        }

        // Before sending this HTLC to the switch, we checkpoint the fresh
        // paymentID and route to the DB. This lets us know on startup the ID
        // of the payment that we attempted to send, such that we can query the
        // Switch for its whereabouts. The route is needed to handle the result
        // when it eventually comes back.
        err = p.router.cfg.Control.RegisterAttempt(
                p.identifier, &attempt.HTLCAttemptInfo,
        )

        return attempt, err
}

// createNewPaymentAttempt creates a new payment attempt from the given route.
func (p *paymentLifecycle) createNewPaymentAttempt(rt *route.Route,
        lastShard bool) (*channeldb.HTLCAttempt, error) {

        // Generate a new key to be used for this attempt.
        sessionKey, err := generateNewSessionKey()
        if err != nil {
                return nil, err
        }

        // We generate a new, unique payment ID that we will use for
        // this HTLC.
        attemptID, err := p.router.cfg.NextPaymentID()
        if err != nil {
                return nil, err
        }

        // Request a new shard from the ShardTracker. If this is an AMP
        // payment, and this is the last shard, the outstanding shards together
        // with this one will be enough for the receiver to derive all HTLC
        // preimages. If this a non-AMP payment, the ShardTracker will return a
        // simple shard with the payment's static payment hash.
        shard, err := p.shardTracker.NewShard(attemptID, lastShard)
        if err != nil {
                return nil, err
        }

        // If this shard carries MPP or AMP options, add them to the last hop
        // on the route.
        hop := rt.Hops[len(rt.Hops)-1]
        if shard.MPP() != nil {
                hop.MPP = shard.MPP()
        }

        if shard.AMP() != nil {
                hop.AMP = shard.AMP()
        }

        hash := shard.Hash()

        // We now have all the information needed to populate the current
        // attempt information.
        return channeldb.NewHtlcAttempt(
                attemptID, sessionKey, *rt, p.router.cfg.Clock.Now(), &hash,
        )
}

// sendAttempt attempts to send the current attempt to the switch to complete
// the payment. If this attempt fails, then we'll continue on to the next
// available route.
func (p *paymentLifecycle) sendAttempt(
        attempt *channeldb.HTLCAttempt) (*attemptResult, error) {

        log.Debugf("Sending HTLC attempt(id=%v, total_amt=%v, first_hop_amt=%d"+
                ") for payment %v", attempt.AttemptID,
                attempt.Route.TotalAmount, attempt.Route.FirstHopAmount.Val,
                p.identifier)

        rt := attempt.Route

        // Construct the first hop.
        firstHop := lnwire.NewShortChanIDFromInt(rt.Hops[0].ChannelID)

        // Craft an HTLC packet to send to the htlcswitch. The metadata within
        // this packet will be used to route the payment through the network,
        // starting with the first-hop.
        htlcAdd := &lnwire.UpdateAddHTLC{
                Amount:        rt.FirstHopAmount.Val.Int(),
                Expiry:        rt.TotalTimeLock,
                PaymentHash:   *attempt.Hash,
                CustomRecords: rt.FirstHopWireCustomRecords,
        }

        // Generate the raw encoded sphinx packet to be included along
        // with the htlcAdd message that we send directly to the
        // switch.
        onionBlob, err := attempt.OnionBlob()
        if err != nil {
                log.Errorf("Failed to create onion blob: attempt=%d in "+
                        "payment=%v, err:%v", attempt.AttemptID,
                        p.identifier, err)

                return p.failAttempt(attempt.AttemptID, err)
        }

        htlcAdd.OnionBlob = onionBlob

        // Send it to the Switch. When this method returns we assume
        // the Switch successfully has persisted the payment attempt,
        // such that we can resume waiting for the result after a
        // restart.
        err = p.router.cfg.Payer.SendHTLC(firstHop, attempt.AttemptID, htlcAdd)
        if err != nil {
                log.Errorf("Failed sending attempt %d for payment %v to "+
                        "switch: %v", attempt.AttemptID, p.identifier, err)

                return p.handleSwitchErr(attempt, err)
        }

        log.Debugf("Attempt %v for payment %v successfully sent to switch, "+
                "route: %v", attempt.AttemptID, p.identifier, &attempt.Route)

        return &attemptResult{
                attempt: attempt,
        }, nil
}

// amendFirstHopData is a function that calls the traffic shaper to allow it to
// add custom records to the outgoing HTLC and also adjust the amount if
// needed.
func (p *paymentLifecycle) amendFirstHopData(rt *route.Route) error {
        // The first hop amount on the route is the full route amount if not
        // overwritten by the traffic shaper. So we set the initial value now
        // and potentially overwrite it later.
        rt.FirstHopAmount = tlv.NewRecordT[tlv.TlvType0](
                tlv.NewBigSizeT(rt.TotalAmount),
        )

        // By default, we set the first hop custom records to the initial
        // value requested by the RPC. The traffic shaper may overwrite this
        // value.
        rt.FirstHopWireCustomRecords = p.firstHopCustomRecords

        if len(rt.Hops) == 0 {
                return fmt.Errorf("cannot amend first hop data, route length " +
                        "is zero")
        }

        firstHopPK := rt.Hops[0].PubKeyBytes

        // extraDataRequest is a helper struct to pass the custom records and
        // amount back from the traffic shaper.
        type extraDataRequest struct {
                customRecords fn.Option[lnwire.CustomRecords]

                amount fn.Option[lnwire.MilliSatoshi]
        }

        // If a hook exists that may affect our outgoing message, we call it now
        // and apply its side effects to the UpdateAddHTLC message.
        result, err := fn.MapOptionZ(
                p.router.cfg.TrafficShaper,
                //nolint:ll
                func(ts htlcswitch.AuxTrafficShaper) fn.Result[extraDataRequest] {
                        newAmt, newRecords, err := ts.ProduceHtlcExtraData(
                                rt.TotalAmount, p.firstHopCustomRecords,
                                firstHopPK,
                        )
                        if err != nil {
                                return fn.Err[extraDataRequest](err)
                        }

                        // Make sure we only received valid records.
                        if err := newRecords.Validate(); err != nil {
                                return fn.Err[extraDataRequest](err)
                        }

                        log.Debugf("Aux traffic shaper returned custom "+
                                "records %v and amount %d msat for HTLC",
                                spew.Sdump(newRecords), newAmt)

                        return fn.Ok(extraDataRequest{
                                customRecords: fn.Some(newRecords),
                                amount:        fn.Some(newAmt),
                        })
                },
        ).Unpack()
        if err != nil {
                return fmt.Errorf("traffic shaper failed to produce extra "+
                        "data: %w", err)
        }

        // Apply the side effects to the UpdateAddHTLC message.
        result.customRecords.WhenSome(func(records lnwire.CustomRecords) {
                rt.FirstHopWireCustomRecords = records
        })
        result.amount.WhenSome(func(amount lnwire.MilliSatoshi) {
                rt.FirstHopAmount = tlv.NewRecordT[tlv.TlvType0](
                        tlv.NewBigSizeT(amount),
                )
        })

        return nil
}

// failAttemptAndPayment fails both the payment and its attempt via the
// router's control tower, which marks the payment as failed in db.
func (p *paymentLifecycle) failPaymentAndAttempt(
        attemptID uint64, reason *channeldb.FailureReason,
        sendErr error) (*attemptResult, error) {

        log.Errorf("Payment %v failed: final_outcome=%v, raw_err=%v",
                p.identifier, *reason, sendErr)

        // Fail the payment via control tower.
        //
        // NOTE: we must fail the payment first before failing the attempt.
        // Otherwise, once the attempt is marked as failed, another goroutine
        // might make another attempt while we are failing the payment.
        err := p.router.cfg.Control.FailPayment(p.identifier, *reason)
        if err != nil {
                log.Errorf("Unable to fail payment: %v", err)
                return nil, err
        }

        // Fail the attempt.
        return p.failAttempt(attemptID, sendErr)
}

// handleSwitchErr inspects the given error from the Switch and determines
// whether we should make another payment attempt, or if it should be
// considered a terminal error. Terminal errors will be recorded with the
// control tower. It analyzes the sendErr for the payment attempt received from
// the switch and updates mission control and/or channel policies. Depending on
// the error type, the error is either the final outcome of the payment or we
// need to continue with an alternative route. A final outcome is indicated by
// a non-nil reason value.
func (p *paymentLifecycle) handleSwitchErr(attempt *channeldb.HTLCAttempt,
        sendErr error) (*attemptResult, error) {

        internalErrorReason := channeldb.FailureReasonError
        attemptID := attempt.AttemptID

        // reportAndFail is a helper closure that reports the failure to the
        // mission control, which helps us to decide whether we want to retry
        // the payment or not. If a non nil reason is returned from mission
        // control, it will further fail the payment via control tower.
        reportAndFail := func(srcIdx *int,
                msg lnwire.FailureMessage) (*attemptResult, error) {

                // Report outcome to mission control.
                reason, err := p.router.cfg.MissionControl.ReportPaymentFail(
                        attemptID, &attempt.Route, srcIdx, msg,
                )
                if err != nil {
                        log.Errorf("Error reporting payment result to mc: %v",
                                err)

                        reason = &internalErrorReason
                }

                // Fail the attempt only if there's no reason.
                if reason == nil {
                        // Fail the attempt.
                        return p.failAttempt(attemptID, sendErr)
                }

                // Otherwise fail both the payment and the attempt.
                return p.failPaymentAndAttempt(attemptID, reason, sendErr)
        }

        // If this attempt ID is unknown to the Switch, it means it was never
        // checkpointed and forwarded by the switch before a restart. In this
        // case we can safely send a new payment attempt, and wait for its
        // result to be available.
        if errors.Is(sendErr, htlcswitch.ErrPaymentIDNotFound) {
                log.Warnf("Failing attempt=%v for payment=%v as it's not "+
                        "found in the Switch", attempt.AttemptID, p.identifier)

                return p.failAttempt(attemptID, sendErr)
        }

        if errors.Is(sendErr, htlcswitch.ErrUnreadableFailureMessage) {
                log.Warn("Unreadable failure when sending htlc: id=%v, hash=%v",
                        attempt.AttemptID, attempt.Hash)

                // Since this error message cannot be decrypted, we will send a
                // nil error message to our mission controller and fail the
                // payment.
                return reportAndFail(nil, nil)
        }

        // If the error is a ClearTextError, we have received a valid wire
        // failure message, either from our own outgoing link or from a node
        // down the route. If the error is not related to the propagation of
        // our payment, we can stop trying because an internal error has
        // occurred.
        var rtErr htlcswitch.ClearTextError
        ok := errors.As(sendErr, &rtErr)
        if !ok {
                return p.failPaymentAndAttempt(
                        attemptID, &internalErrorReason, sendErr,
                )
        }

        // failureSourceIdx is the index of the node that the failure occurred
        // at. If the ClearTextError received is not a ForwardingError the
        // payment error occurred at our node, so we leave this value as 0
        // to indicate that the failure occurred locally. If the error is a
        // ForwardingError, it did not originate at our node, so we set
        // failureSourceIdx to the index of the node where the failure occurred.
        failureSourceIdx := 0
        var source *htlcswitch.ForwardingError
        ok = errors.As(rtErr, &source)
        if ok {
                failureSourceIdx = source.FailureSourceIdx
        }

        // Extract the wire failure and apply channel update if it contains one.
        // If we received an unknown failure message from a node along the
        // route, the failure message will be nil.
        failureMessage := rtErr.WireMessage()
        err := p.handleFailureMessage(
                &attempt.Route, failureSourceIdx, failureMessage,
        )
        if err != nil {
                return p.failPaymentAndAttempt(
                        attemptID, &internalErrorReason, sendErr,
                )
        }

        log.Tracef("Node=%v reported failure when sending htlc",
                failureSourceIdx)

        return reportAndFail(&failureSourceIdx, failureMessage)
}

// handleFailureMessage tries to apply a channel update present in the failure
// message if any.
func (p *paymentLifecycle) handleFailureMessage(rt *route.Route,
        errorSourceIdx int, failure lnwire.FailureMessage) error {

        if failure == nil {
                return nil
        }

        // It makes no sense to apply our own channel updates.
        if errorSourceIdx == 0 {
                log.Errorf("Channel update of ourselves received")

                return nil
        }

        // Extract channel update if the error contains one.
        update := p.router.extractChannelUpdate(failure)
        if update == nil {
                return nil
        }

        // Parse pubkey to allow validation of the channel update. This should
        // always succeed, otherwise there is something wrong in our
        // implementation. Therefore, return an error.
        errVertex := rt.Hops[errorSourceIdx-1].PubKeyBytes
        errSource, err := btcec.ParsePubKey(errVertex[:])
        if err != nil {
                log.Errorf("Cannot parse pubkey: idx=%v, pubkey=%v",
                        errorSourceIdx, errVertex)

                return err
        }

        var (
                isAdditionalEdge bool
                policy           *models.CachedEdgePolicy
        )

        // Before we apply the channel update, we need to decide whether the
        // update is for additional (ephemeral) edge or normal edge stored in
        // db.
        //
        // Note: the p.paySession might be nil here if it's called inside
        // SendToRoute where there's no payment lifecycle.
        if p.paySession != nil {
                policy = p.paySession.GetAdditionalEdgePolicy(
                        errSource, update.ShortChannelID.ToUint64(),
                )
                if policy != nil {
                        isAdditionalEdge = true
                }
        }

        // Apply channel update to additional edge policy.
        if isAdditionalEdge {
                if !p.paySession.UpdateAdditionalEdge(
                        update, errSource, policy) {

                        log.Debugf("Invalid channel update received: node=%v",
                                errVertex)
                }
                return nil
        }

        // Apply channel update to the channel edge policy in our db.
        if !p.router.cfg.ApplyChannelUpdate(update) {
                log.Debugf("Invalid channel update received: node=%v",
                        errVertex)
        }
        return nil
}

// failAttempt calls control tower to fail the current payment attempt.
func (p *paymentLifecycle) failAttempt(attemptID uint64,
        sendError error) (*attemptResult, error) {

        log.Warnf("Attempt %v for payment %v failed: %v", attemptID,
                p.identifier, sendError)

        failInfo := marshallError(
                sendError,
                p.router.cfg.Clock.Now(),
        )

        // Now that we are failing this payment attempt, cancel the shard with
        // the ShardTracker such that it can derive the correct hash for the
        // next attempt.
        if err := p.shardTracker.CancelShard(attemptID); err != nil {
                return nil, err
        }

        attempt, err := p.router.cfg.Control.FailAttempt(
                p.identifier, attemptID, failInfo,
        )
        if err != nil {
                return nil, err
        }

        return &attemptResult{
                attempt: attempt,
                err:     sendError,
        }, nil
}

// marshallError marshall an error as received from the switch to a structure
// that is suitable for database storage.
func marshallError(sendError error, time time.Time) *channeldb.HTLCFailInfo {
        response := &channeldb.HTLCFailInfo{
                FailTime: time,
        }

        switch {
        case errors.Is(sendError, htlcswitch.ErrPaymentIDNotFound):
                response.Reason = channeldb.HTLCFailInternal
                return response

        case errors.Is(sendError, htlcswitch.ErrUnreadableFailureMessage):
                response.Reason = channeldb.HTLCFailUnreadable
                return response
        }

        var rtErr htlcswitch.ClearTextError
        ok := errors.As(sendError, &rtErr)
        if !ok {
                response.Reason = channeldb.HTLCFailInternal
                return response
        }

        message := rtErr.WireMessage()
        if message != nil {
                response.Reason = channeldb.HTLCFailMessage
                response.Message = message
        } else {
                response.Reason = channeldb.HTLCFailUnknown
        }

        // If the ClearTextError received is a ForwardingError, the error
        // originated from a node along the route, not locally on our outgoing
        // link. We set failureSourceIdx to the index of the node where the
        // failure occurred. If the error is not a ForwardingError, the failure
        // occurred at our node, so we leave the index as 0 to indicate that
        // we failed locally.
        var fErr *htlcswitch.ForwardingError
        ok = errors.As(rtErr, &fErr)
        if ok {
                response.FailureSourceIndex = uint32(fErr.FailureSourceIdx)
        }

        return response
}

// patchLegacyPaymentHash will make a copy of the passed attempt and sets its
// Hash field to be the payment hash if it's nil.
//
// NOTE: For legacy payments, which were created before the AMP feature was
// enabled, the `Hash` field in their HTLC attempts is nil. In that case, we use
// the payment hash as the `attempt.Hash` as they are identical.
func (p *paymentLifecycle) patchLegacyPaymentHash(
        a channeldb.HTLCAttempt) channeldb.HTLCAttempt {

        // Exit early if this is not a legacy attempt.
        if a.Hash != nil {
                return a
        }

        // Log a warning if the user is still using legacy payments, which has
        // weaker support.
        log.Warnf("Found legacy htlc attempt %v in payment %v", a.AttemptID,
                p.identifier)

        // Set the attempt's hash to be the payment hash, which is the payment's
        // `PaymentHash`` in the `PaymentCreationInfo`. For legacy payments
        // before AMP feature, the `Hash` field was not set so we use the
        // payment hash instead.
        //
        // NOTE: During the router's startup, we have a similar logic in
        // `resumePayments`, in which we will use the payment hash instead if
        // the attempt's hash is nil.
        a.Hash = &p.identifier

        return a
}

// reloadInflightAttempts is called when the payment lifecycle is resumed after
// a restart. It reloads all inflight attempts from the control tower and
// collects the results of the attempts that have been sent before.
func (p *paymentLifecycle) reloadInflightAttempts() (DBMPPayment, error) {
        payment, err := p.router.cfg.Control.FetchPayment(p.identifier)
        if err != nil {
                return nil, err
        }

        for _, a := range payment.InFlightHTLCs() {
                a := a

                log.Infof("Resuming HTLC attempt %v for payment %v",
                        a.AttemptID, p.identifier)

                // Potentially attach the payment hash to the `Hash` field if
                // it's a legacy payment.
                a = p.patchLegacyPaymentHash(a)

                p.resultCollector(&a)
        }

        return payment, nil
}

// reloadPayment returns the latest payment found in the db (control tower).
func (p *paymentLifecycle) reloadPayment() (DBMPPayment,
        *channeldb.MPPaymentState, error) {

        // Read the db to get the latest state of the payment.
        payment, err := p.router.cfg.Control.FetchPayment(p.identifier)
        if err != nil {
                return nil, nil, err
        }

        ps := payment.GetState()
        remainingFees := p.calcFeeBudget(ps.FeesPaid)

        log.Debugf("Payment %v: status=%v, active_shards=%v, rem_value=%v, "+
                "fee_limit=%v", p.identifier, payment.GetStatus(),
                ps.NumAttemptsInFlight, ps.RemainingAmt, remainingFees)

        return payment, ps, nil
}

// handleAttemptResult processes the result of an HTLC attempt returned from
// the htlcswitch.
func (p *paymentLifecycle) handleAttemptResult(attempt *channeldb.HTLCAttempt,
        result *htlcswitch.PaymentResult) (*attemptResult, error) {

        // If the result has an error, we need to further process it by failing
        // the attempt and maybe fail the payment.
        if result.Error != nil {
                return p.handleSwitchErr(attempt, result.Error)
        }

        // We got an attempt settled result back from the switch.
        log.Debugf("Payment(%v): attempt(%v) succeeded", p.identifier,
                attempt.AttemptID)

        // Report success to mission control.
        err := p.router.cfg.MissionControl.ReportPaymentSuccess(
                attempt.AttemptID, &attempt.Route,
        )
        if err != nil {
                log.Errorf("Error reporting payment success to mc: %v", err)
        }

        // In case of success we atomically store settle result to the DB and
        // move the shard to the settled state.
        htlcAttempt, err := p.router.cfg.Control.SettleAttempt(
                p.identifier, attempt.AttemptID,
                &channeldb.HTLCSettleInfo{
                        Preimage:   result.Preimage,
                        SettleTime: p.router.cfg.Clock.Now(),
                },
        )
        if err != nil {
                log.Errorf("Error settling attempt %v for payment %v with "+
                        "preimage %v: %v", attempt.AttemptID, p.identifier,
                        result.Preimage, err)

                // We won't mark the attempt as failed since we already have
                // the preimage.
                return nil, err
        }

        return &attemptResult{
                attempt: htlcAttempt,
        }, nil
}

// collectAndHandleResult waits for the result for the given attempt to be
// available from the Switch, then records the attempt outcome with the control
// tower. An attemptResult is returned, indicating the final outcome of this
// HTLC attempt.
func (p *paymentLifecycle) collectAndHandleResult(
        attempt *channeldb.HTLCAttempt) (*attemptResult, error) {

        result, err := p.collectResult(attempt)
        if err != nil {
                return nil, err
        }

        return p.handleAttemptResult(attempt, result)
}

lightningnetwork / lnd / 16948521526

Source File Press 'n' to go to next uncovered line, 'b' for previous

Source File
Press 'n' to go to next uncovered line, 'b' for previous